151 lines
4.8 KiB
Groff
151 lines
4.8 KiB
Groff
|
|
|||
|
|
|
|||
|
|
THIS IS THE README FILE FOR THE PC SCHEME 3.03 RELEASE
|
|||
|
|
|
|||
|
|
|
|||
|
|
A. Materials to be provided by Software Control:
|
|||
|
|
|
|||
|
|
1.) Two blank, formatted, double-sided, double-density (360KB)
|
|||
|
|
floppy diskettes. They should already be formatted.
|
|||
|
|
|
|||
|
|
2.) Business Pro with:
|
|||
|
|
- 640K memory
|
|||
|
|
- one high-density (1.2 MByte) floppy drive (drive A)
|
|||
|
|
- one low-density (360 KByte) drive (drive B)
|
|||
|
|
- a printer
|
|||
|
|
- one Winchester hard disk drive with at least 10 Mbytes free
|
|||
|
|
|
|||
|
|
3.) MS-DOS Operating System diskette vers. 3.21 (P/N 2538155-1610
|
|||
|
|
AND 1611)
|
|||
|
|
|
|||
|
|
4.) MACRO ASSEMBLER version 4.00 diskette (P/N 2546114).
|
|||
|
|
|
|||
|
|
5.) LATTICE 'C' COMPILER version 3.05 diskettes (P/N 2249759).
|
|||
|
|
|
|||
|
|
6.) Dater diskette version 1.20 (P/N 2223081-1610).
|
|||
|
|
|
|||
|
|
7.) PC SCHEME version 3.02 diskettes (P/N 2537901-0001, -0002).
|
|||
|
|
|
|||
|
|
|
|||
|
|
B. Materials to be provided by the Scheme Development group:
|
|||
|
|
|
|||
|
|
1.) TI PC SCHEME SOURCE diskette #1 (P/N 2537903-2620).
|
|||
|
|
|
|||
|
|
2.) TI PC SCHEME SOURCE diskette #2 (P/N 2537903-2621).
|
|||
|
|
|
|||
|
|
3.) TI PC SCHEME SOURCE diskette #3 (P/N 2537903-2622).
|
|||
|
|
|
|||
|
|
4.) TI PC SCHEME SOURCE diskette #4 (P/N 2537903-2623).
|
|||
|
|
|
|||
|
|
|
|||
|
|
C. Release procedure steps:
|
|||
|
|
|
|||
|
|
1.) Boot the PC from MS-DOS diskette.
|
|||
|
|
|
|||
|
|
2.) Enter the date and time when you are requested to do so.
|
|||
|
|
|
|||
|
|
3.) Format the Winchester as follows:
|
|||
|
|
|
|||
|
|
- Type FORMAT E: /S (and pressing RETURN).
|
|||
|
|
- Respond to the prompt for drive type with appropriate number.
|
|||
|
|
|
|||
|
|
4.) Copy all the files on the MS-DOS diskette onto the Winchester by
|
|||
|
|
typing:
|
|||
|
|
|
|||
|
|
COPY *.* E:/V (and pressing RETURN)
|
|||
|
|
|
|||
|
|
4.1) Modify the CONFIG.SYS file to include at least 15 files:
|
|||
|
|
|
|||
|
|
FILES=20
|
|||
|
|
BUFFERS=15
|
|||
|
|
|
|||
|
|
5.) Reboot the system from the Winchester.
|
|||
|
|
|
|||
|
|
6.) Enter the date and time when you are requested to do so.
|
|||
|
|
|
|||
|
|
7.) Remove the MS-DOS diskette from drive A: and insert the PC SCHEME
|
|||
|
|
SOURCE diskette #1 (P/N 2537903-2620) in drive A:
|
|||
|
|
|
|||
|
|
8.) Begin execution of the batch stream to build PC SCHEME:
|
|||
|
|
|
|||
|
|
- Press the PRNT key (to cause subsequent messages to be echoed
|
|||
|
|
to the printer).
|
|||
|
|
|
|||
|
|
- Type A:MASTER
|
|||
|
|
|
|||
|
|
The batch stream will instruct you to insert the diskettes listed
|
|||
|
|
above. Once the necessary files have been copied to the Winchester,
|
|||
|
|
the actual build process will begin and no further attention is
|
|||
|
|
required until the installation disks are ready to be made
|
|||
|
|
(the batch stream will wait for you at that point).
|
|||
|
|
|
|||
|
|
9.) Each of the assemblies in the batch stream should terminate with the
|
|||
|
|
following message:
|
|||
|
|
|
|||
|
|
Warning Severe
|
|||
|
|
Errors Errors
|
|||
|
|
0 0
|
|||
|
|
|
|||
|
|
10.) C compilations may produce warning messages and this is all right.
|
|||
|
|
There should be no error messages, however.
|
|||
|
|
|
|||
|
|
11.) DOS messages about "unable to create directory" during CD commands
|
|||
|
|
or "file not found" during DEL commands can be ignored.
|
|||
|
|
|
|||
|
|
11.) After the assemblies, compilations, and linking have completed, the
|
|||
|
|
batch stream will invoke the PCS.EXE file several times to compile
|
|||
|
|
the Scheme compiler source files, Scoops source files, and Edwin.
|
|||
|
|
|
|||
|
|
You will see some warning messages like
|
|||
|
|
|
|||
|
|
[WARNING: modifying an 'integrable' variable: xxxxxx]
|
|||
|
|
|
|||
|
|
displayed on the screen, however they will not be written to the
|
|||
|
|
printer.
|
|||
|
|
|
|||
|
|
12.) When you are prompted to, insert the first blank formatted 360KB
|
|||
|
|
diskette into drive B (*not* drive A) and press RETURN to continue.
|
|||
|
|
At the next prompt, remove the diskette and replace it with the
|
|||
|
|
second blank formatted 360KB diskette in drive B and press RETURN.
|
|||
|
|
At the next prompt, remove the diskette and replace it with the
|
|||
|
|
third blank formatted 360KB diskette in drive B and press RETURN.
|
|||
|
|
At the next prompt, remove the diskette.
|
|||
|
|
|
|||
|
|
13.) Label the first diskettes as:
|
|||
|
|
|
|||
|
|
PC SCHEME INSTALLATION DISKETTE,
|
|||
|
|
Master FDO diskette #1
|
|||
|
|
(P/N 2537903-1610).
|
|||
|
|
|
|||
|
|
Label the second diskette as:
|
|||
|
|
|
|||
|
|
PC SCHEME AUTOLOAD DISKETTE,
|
|||
|
|
Master FDO diskette #2
|
|||
|
|
(P/N 2537903-1611).
|
|||
|
|
|
|||
|
|
Label the third diskette as:
|
|||
|
|
|
|||
|
|
PC SCHEME PROTECTED MODE INSTALLATION DISKETTE,
|
|||
|
|
Master FDO diskette #3
|
|||
|
|
(P/N 2537903-1615).
|
|||
|
|
|
|||
|
|
14.) You're done.
|
|||
|
|
|
|||
|
|
|
|||
|
|
***** Addendum for creating 3.5-inch installation disks. *****
|
|||
|
|
|
|||
|
|
1.) Assuming that the 3.5" drive is drive C, do the following:
|
|||
|
|
|
|||
|
|
- Put a blank, formatted 3.5" diskette into drive C.
|
|||
|
|
- Put the PC Scheme Installation diskette into drive A and do:
|
|||
|
|
|
|||
|
|
COPY A:*.* C:
|
|||
|
|
|
|||
|
|
- Put the PC Scheme Autoload diskette into drive A (do not
|
|||
|
|
remove the diskette from drive C) and do:
|
|||
|
|
|
|||
|
|
COPY A:*.* C:
|
|||
|
|
|
|||
|
|
- You're done. There is only one installation diskette created
|
|||
|
|
when using 3.5" media.
|
|||
|
|
|