canvas

SYNOPSIS

STANDARD OPTIONS

:background                            :borderwidth 
:cursor                                :highlightbackground 
:highlightcolor                        :highlightthickness 
:insertbackground                      :insertborderwidth 
:insertofftime                         :insertontime 
:insertwidth                           :relief 
:selectbackground                      :selectborderwidth 
:selectforeground                      :takefocus 
:xscrollcommand                        :yscrollcommand 

WIDGET-SPECIFIC OPTIONS

Name: closeEnough

Class: CloseEnough

Option keyword: :closeenough

STklos slot name: close-enough

Specifies a floating-point value indicating how close the mouse cursor must be to an item before it is considered to be ``inside'' the item. Defaults to 1.0.

Name: confine

Class: Confine

Option keyword: :confine

STklos slot name: confine

Specifies a boolean value that indicates whether or not it should be allowable to set the canvas's view outside the region defined by the scrollRegion argument. Defaults to true, which means that the view will be constrained within the scroll region.

Name: height

Class: Height

Option keyword: :height

STklos slot name: height

Specifies a desired window height that the canvas widget should request from its geometry manager. The value may be specified in any of the forms described in the COORDINATES section below.

Name: scrollRegion

Class: ScrollRegion

Option keyword: :scrollregion

STklos slot name: scroll-region

Specifies a list with four coordinates describing the left, top, right, and bottom coordinates of a rectangular region. This region is used for scrolling purposes and is considered to be the boundary of the information in the canvas. Each of the coordinates may be specified in any of the forms given in the COORDINATES section below.

Name: width

Class: width

Option keyword: :width

STklos slot name: width

Specifies a desired window width that the canvas widget should request from its geometry manager. The value may be specified in any of the forms described in the COORDINATES section below.

Name: xScrollIncrement

Class: ScrollIncrement

Option keyword: :xscrollincrement

STklos slot name: x-scroll-indent

Specifies an increment for horizontal scrolling, in any of the usual forms permitted for screen distances. If the value of this option is greater than zero, the horizontal view in the window will be constrained so that the canvas x coordinate at the left edge of the window is always an even multiple of xScrollIncrement; furthermore, the units for scrolling (e.g., the change in view when the left and right arrows of a scrollbar are selected) will also be xScrollIncrement. If the value of this option is less than or equal to zero, then horizontal scrolling is unconstrained.

Name: yScrollIncrement

Class: ScrollIncrement

Option keyword: :yscrollincrement

STklos slot name: y-scroll-indent

Specifies an increment for vertical scrolling, in any of the usual forms permitted for screen distances. If the value of this option is greater than zero, the vertical view in the window will be constrained so that the canvas y coordinate at the top edge of the window is always an even multiple of yScrollIncrement; furthermore, the units for scrolling (e.g., the change in view when the top and bottom arrows of a scrollbar are selected) will also be yScrollIncrement. If the value of this option is less than or equal to zero, then vertical scrolling is unconstrained.

INTRODUCTION

Canvas widgets implement structured graphics. A canvas displays any number of items, which may be things like rectangles, circles, lines, and text. Items may be manipulated (e.g. moved or re-colored) and procedures may be associated with items in much the same way that the bind procedure allows procedures to be bound to widgets. For example, a particular procedure may be associated with the <Button-1> event so that the procedure is invoked whenever button 1 is pressed with the mouse cursor over an item. This means that items in a canvas can have behaviors defined by the STk scripts bound to them.

DISPLAY LIST

ITEM IDS AND TAGS

Each item may also have any number of tags associated with it. A tag is just a string of characters, and it may take any form except that of an integer. For example, ``x123'' is OK but ``123'' isn't. The same tag may be associated with many different items. This is commonly done to group items in various interesting ways; for example, all selected items might be given the tag ``selected''.

The tag all is implicitly associated with every item in the canvas; it may be used to invoke operations on all the items in the canvas.

The tag current is managed automatically by Tk; it applies to the current item, which is the topmost item whose drawn area covers the position of the mouse cursor. If the mouse is not in the canvas widget or is not over an item, then no item has the current tag.

When specifying items in canvas widget procedures, if the specifier is an integer then it is assumed to refer to the single item with that id. If the specifier is not an integer, then it is assumed to refer to all of the items in the canvas that have a tag matching the specifier. The symbol tagOrId is used below to indicate that an argument specifies either an id that selects a single item or a tag that selects zero or more items. Some widget procedures only operate on a single item at a time; if tagOrId is specified in a way that names multiple items, then the normal behavior is for the procedure to use the first (lowest) of these items in the display list that is suitable for the procedure. Exceptions are noted in the widget procedure descriptions below.

COORDINATES

TRANSFORMATIONS

Individual items may be moved or scaled using widget procedures described below, but they may not be rotated.

INDICES

number

A decimal number giving the position of the desired character within the text item. 0 refers to the first character, 1 to the next character, and so on. A number less than 0 is treated as if it were zero, and a number greater than the length of the text item is treated as if it were equal to the length of the text item.

end

Refers to the character just after the last one in the item (same as the number of characters in the item).

insert

Refers to the character just before which the insertion cursor is drawn in this item.

sel.first

Refers to the first selected character in the item. If the selection isn't in this item then this form is illegal.

sel.last

Refers to the last selected character in the item. If the selection isn't in this item then this form is illegal.

@x,y

Refers to the character at the point given by x and y, where x and y are specified in the coordinate system of the canvas. If x and y lie outside the coordinates covered by the text item, then they refer to the first or last character in the line that is closest to the given point.

WIDGET PROCEDURE

(widget-name option ?arg arg ...?)

(widget-name 'addtag tag searchSpec ?arg arg ...?)

For each item that meets the constraints specified by searchSpec and the args, add tag to the list of tags associated with the item if it isn't already present on that list. It is possible that no items will satisfy the constraints given by searchSpec and args, in which case the procedure has no effect. This procedure returns an empty list as result. SearchSpec and arg's may take any of the following forms:

above tagOrId

Selects the item just after (above) the one given by tagOrId in the display list. If tagOrId denotes more than one item, then the last (topmost) of these items in the display list is used.

all

Selects all the items in the canvas.

below tagOrId

Selects the item just before (below) the one given by tagOrId in the display list. If tagOrId denotes more than one item, then the first (lowest) of these items in the display list is used.

closest x y ?halo? ?start?

Selects the item closest to the point given by x and y. If more than one item is at the same closest distance (e.g. two items overlap the point), then the top-most of these items (the last one in the display list) is used. If halo is specified, then it must be a non-negative value. Any item closer than halo to the point is considered to overlap it. The start argument may be used to step circularly through all the closest items. If start is specified, it names an item using a tag or id (if by tag, it selects the first item in the display list with the given tag). Instead of selecting the topmost closest item, this form will select the topmost closest item that is below start in the display list; if no such item exists, then the selection behaves as if the start argument had not been specified.

enclosed x1 y1 x2 y2

Selects all the items completely enclosed within the rectangular region given by x1, y1, x2, and y2. X1 must be no greater then x2 and y1 must be no greater than y2.

overlapping x1 y1 x2 y2

Selects all the items that overlap or are enclosed within the rectangular region given by x1, y1, x2, and y2. X1 must be no greater then x2 and y1 must be no greater than y2.

withtag tagOrId

Selects all the items given by tagOrId.

(widget-name 'bbox tagOrId ?tagOrId tagOrId ...?)

Returns a list with four elements giving an approximate bounding box for all the items named by the tagOrId arguments. The list has the form (x1 y1 x2 y2) such that the drawn areas of all the named elements are within the region bounded by x1 on the left, x2 on the right, y1 on the top, and y2 on the bottom. The return value may overestimate the actual bounding box by a few pixels. If no items match any of the tagOrId arguments or if the matching items have empty bounding boxes (i.e. they have nothing to display) then an empty list is returned.

(widget-name 'bind tagOrId ?sequence? ?procedure?)

This procedure associates procedure with all the items given by tagOrId such that whenever the event sequence given by sequence occurs for one of the items the procedure will be invoked. This widget procedure is similar to the bind procedure except that it operates on items in a canvas rather than entire widgets. See the bind manual entry for complete details on the syntax of sequence and the substitutions performed on procedure before invoking it. If all arguments are specified then a new binding is created, replacing any existing binding for the same sequence and tagOrId (if the first character of procedure is ``+'' then procedure augments an existing binding rather than replacing it). In this case the return value is an empty list. If procedure is omitted then the procedure returns the procedure associated with tagOrId and sequence (an error occurs if there is no such binding). If both procedure and sequence are omitted then the procedure returns a list of all the sequences for which bindings have been defined for tagOrId.

Example:

(pack (canvas '.c))
            (define item (.c 'create 'rectangle 0 0 10 10))
            (.c 'bind item "<Enter>" (lambda() (display "You enter\n")))

The only events for which bindings may be specified are those related to the mouse and keyboard, such as Enter, Leave, ButtonPress, Motion, and KeyPress. The handling of events in canvases uses the current item defined in ITEM IDS AND TAGS above. Enter and Leave events trigger for an item when it becomes the current item or ceases to be the current item; note that these events are different than Enter and Leave events for windows. Mouse-related events are directed to the current item, if any. Keyboard-related events are directed to the focus item, if any (see the focus widget procedure below for more on this).

It is possible for multiple bindings to match a particular event. This could occur, for example, if one binding is associated with the item's id and another is associated with one of the item's tags. When this occurs, all of the matching bindings are invoked. A binding associated with the all tag is invoked first, followed by one binding for each of the item's tags (in order), followed by a binding associated with the item's id. If there are multiple matching bindings for a single tag, then only the most specific binding is invoked. If a binding script returns the symbol break, remaining scripts for the event are skipped, just as for the bind procedure.

If bindings have been created for a canvas window using the bind procedure, then they are invoked in addition to bindings created for the canvas's items using the bind widget procedure. The bindings for items will be invoked before any of the bindings for the window as a whole.

(widget-name 'canvasx screenx)

(widget-name 'canvasx screenx gridspacing)

Given a screen x-coordinate screenx this procedure returns the canvas x-coordinate that is displayed at that location. If gridspacing is specified, then the canvas coordinate is rounded to the nearest multiple of gridspacing units.

(widget-name 'canvasy screeny)

(widget-name 'canvasy screeny gridspacing)

Given a screen y-coordinate screeny this procedure returns the canvas y-coordinate that is displayed at that location. If gridspacing is specified, then the canvas coordinate is rounded to the nearest multiple of gridspacing units.

(widget-name 'cget option)

Returns the current value of the configuration option given by option. Option may have any of the values accepted by the canvas procedure.

(widget-name 'configure ?option? ?value? ?option value ...?)

Query or modify the configuration options of the widget. If no option is specified, returns a list describing all of the available options for widget-name (see Tk_ConfigureInfo for information on the format of this list). If option is specified with no value, then the procedure returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified). If one or more option-value pairs are specified, then the procedure modifies the given widget option(s) to have the given value(s); in this case the procedure returns an empty list. Option may have any of the values accepted by the canvas procedure.

(widget-name 'coords tagOrId ?x0 y0 ...?)

Query or modify the coordinates that define an item. If no coordinates are specified, this procedure returns a list whose elements are the coordinates of the item named by tagOrId. If coordinates are specified, then they replace the current coordinates for the named item. If tagOrId refers to multiple items, then the first one in the display list is used.

(widget-name 'create type x y ?x y ...? ?option value ...?)

Create a new item in widget-name of type type. The exact format of the arguments after type depends on type, but usually they consist of the coordinates for one or more points, followed by specifications for zero or more item options. See the subsections on individual item types below for more on the syntax of this procedure. This procedure returns the id for the new item.

(widget-name 'dchars tagOrId first )

(widget-name 'dchars tagOrId first last)

For each item given by tagOrId, delete the characters in the range given by first and last, inclusive. If some of the items given by tagOrId don't support text operations, then they are ignored. First and last are indices of characters within the item(s) as described in INDICES above. If last is omitted, it defaults to first. This procedure returns an empty list.

(widget-name 'delete ?tagOrId tagOrId ...?)

Delete each of the items given by each tagOrId, and return an empty list.

(widget-name 'dtag tagOrId )

(widget-name 'dtag tagOrId tagToDelete)

For each of the items given by tagOrId, delete the tag given by tagToDelete from the list of those associated with the item. If an item doesn't have the tag tagToDelete then the item is unaffected by the procedure. If tagToDelete is omitted then it defaults to tagOrId. This procedure returns an empty list.

(widget-name 'find searchProcedure ?arg arg ...?)

This procedure returns a list consisting of all the items that meet the constraints specified by searchProcedure and arg's. SearchProcedure and args have any of the forms accepted by the addtag procedure.

(widget-name 'focus )

(widget-name 'focus tagOrId)

Set the keyboard focus for the canvas widget to the item given by tagOrId. If tagOrId refers to several items, then the focus is set to the first such item in the display list that supports the insertion cursor. If tagOrId doesn't refer to any items, or if none of them support the insertion cursor, then the focus isn't changed. If tagOrId is an empty string, then the focus item is reset so that no item has the focus. If tagOrId is not specified then the procedure returns the id for the item that currently has the focus, or an empty list if no item has the focus.

Once the focus has been set to an item, the item will display the insertion cursor and all keyboard events will be directed to that item. The focus item within a canvas and the focus window on the screen (set with the focus procedure) are totally independent: a given item doesn't actually have the input focus unless (a) its canvas is the focus window and (b) the item is the focus item within the canvas. In most cases it is advisable to follow the focus widget procedure with the focus option to set the focus window to the canvas (if it wasn't there already).

(widget-name 'gettags tagOrId)

Return a list whose elements are the tags associated with the item given by tagOrId. If tagOrId refers to more than one item, then the tags are returned from the first such item in the display list. If tagOrId doesn't refer to any items, or if the item contains no tags, then an empty list is returned.

(widget-name 'icursor tagOrId index)

Set the position of the insertion cursor for the item(s) given by tagOrId to just before the character whose position is given by index. If some or all of the items given by tagOrId don't support an insertion cursor then this procedure has no effect on them. See INDICES above for a description of the legal forms for index. Note: the insertion cursor is only displayed in an item if that item currently has the keyboard focus (see the widget procedure focus, below), but the cursor position may be set even when the item doesn't have the focus. This procedure returns an empty list.

(widget-name 'index tagOrId index)

This procedure returns a decimal string giving the numerical index within tagOrId corresponding to index. Index gives a textual description of the desired position as described in INDICES above. The return value is guaranteed to lie between 0 and the number of characters within the item, inclusive. If tagOrId refers to multiple items, then the index is processed in the first of these items that supports indexing operations (in display list order).

(widget-name 'insert tagOrId beforeThis string)

For each of the items given by tagOrId, if the item supports text insertion then string is inserted into the item's text just before the character whose index is beforeThis. See INDICES above for information about the forms allowed for beforeThis. This procedure returns an empty list.

(widget-name 'itemcget tagOrId option)

Returns the current value of the configuration option for the item given by tagOrId whose name is option. This procedure is similar to the cget widget procedure except that it applies to a particular item rather than the widget as a whole. Option may have any of the values accepted by the create widget procedure when the item was created. If tagOrId is a tag that refers to more than one item, the first (lowest) such item is used.

(widget-name 'itemconfigure tagOrId ?option? ?value? ?option value ...?)

This procedure is similar to the configure widget procedure except that it modifies item-specific options for the items given by tagOrId instead of modifying options for the overall canvas widget. If no option is specified, returns a list describing all of the available options for the first item given by tagOrId (see Tk_ConfigureInfo for information on the format of this list). If option is specified with no value, then the procedure returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified). If one or more option-value pairs are specified, then the procedure modifies the given widget option(s) to have the given value(s) in each of the items given by tagOrId; in this case the procedure returns an empty list. The options and values are the same as those permissible in the create widget procedure when the item(s) were created; see the sections describing individual item types below for details on the legal options.

(widget-name 'lower tagOrId )

(widget-name 'lower tagOrId belowThis)

Move all of the items given by tagOrId to a new position in the display list just before the item given by belowThis. If tagOrId refers to more than one item then all are moved but the relative order of the moved items will not be changed. BelowThis is a tag or id; if it refers to more than one item then the first (lowest) of these items in the display list is used as the destination location for the moved items. This procedure returns an empty list.

(widget-name 'move tagOrId xAmount yAmount)

Move each of the items given by tagOrId in the canvas coordinate space by adding xAmount to the x-coordinate of each point associated with the item and yAmount to the y-coordinate of each point associated with the item. This procedure returns an empty list.

(widget-name 'postscript ?option value option value ...?)

Generate a Postscript representation for part or all of the canvas. If the :file option is specified then the Postscript is written to a file and an empty list is returned; otherwise the Postscript is returned as the result of the procedure. The Postscript is created in Encapsulated Postscript form using version 3.0 of the Document Structuring Conventions. Note: by default Postscript is only generated for information that appears in the canvas's window on the screen. If the canvas is freshly created it may still have its initial size of 1x1 pixel so nothing will appear in the Postscript. To get around this problem either invoke the "update" procedure to wait for the canvas window to reach its final size, or else use the :width and :height options to specify the area of the canvas to print. The option-value argument pairs provide additional information to control the generation of Postscript. The following options are supported:

:colormap varName

NOT IMPLEMENTED IN STk

:colormode mode

Specifies how to output color information. Mode must be either color (for full color output), gray (convert all colors to their gray-scale equivalents) or mono (convert all colors to black or white).

:file fileName

Specifies the name of the file in which to write the Postscript. If this option isn't specified then the Postscript is returned as the result of the procedure instead of being written to a file.

:fontmap varName

NOT IMPLEMENTED IN STk

:height size

Specifies the height of the area of the canvas to print. Defaults to the height of the canvas window.

:pageanchor anchor

Specifies which point of the printed area of the canvas should appear over the positioning point on the page (which is given by the :pagex and :pagey options). For example, :pageanchor n means that the top center of the area of the canvas being printed (as it appears in the canvas window) should be over the positioning point. Defaults to center.

:pageheight size

Specifies that the Postscript should be scaled in both x and y so that the printed area is size high on the Postscript page. Size consists of a floating-point number followed by c for centimeters, i for inches, m for millimeters, or p or nothing for printer's points (1/72 inch). Defaults to the height of the printed area on the screen. If both :pageheight and :pagewidth are specified then the scale factor from :pagewidth is used (non-uniform scaling is not implemented).

:pagewidth size

Specifies that the Postscript should be scaled in both x and y so that the printed area is size wide on the Postscript page. Size has the same form as for :pageheight. Defaults to the width of the printed area on the screen. If both :pageheight and :pagewidth are specified then the scale factor from :pagewidth is used (non-uniform scaling is not implemented).

:pagex position

Position gives the x-coordinate of the positioning point on the Postscript page, using any of the forms allowed for :pageheight. Used in conjunction with the :pagey and :pageanchor options to determine where the printed area appears on the Postscript page. Defaults to the center of the page.

:pagey position

Position gives the y-coordinate of the positioning point on the Postscript page, using any of the forms allowed for :pageheight. Used in conjunction with the :pagex and :pageanchor options to determine where the printed area appears on the Postscript page. Defaults to the center of the page.

:rotate boolean

Boolean specifies whether the printed area is to be rotated 90 degrees. In non-rotated output the x-axis of the printed area runs along the short dimension of the page (``portrait'' orientation); in rotated output the x-axis runs along the long dimension of the page (``landscape'' orientation). Defaults to non-rotated.

:width size

Specifies the width of the area of the canvas to print. Defaults to the width of the canvas window.

:x position

Specifies the x-coordinate of the left edge of the area of the canvas that is to be printed, in canvas coordinates, not window coordinates. Defaults to the coordinate of the left edge of the window.

:y position

Specifies the y-coordinate of the top edge of the area of the canvas that is to be printed, in canvas coordinates, not window coordinates. Defaults to the coordinate of the top edge of the window.

(widget-name 'raise tagOrId )

(widget-name 'raise tagOrId aboveThis)

Move all of the items given by tagOrId to a new position in the display list just after the item given by aboveThis. If tagOrId refers to more than one item then all are moved but the relative order of the moved items will not be changed. AboveThis is a tag or id; if it refers to more than one item then the last (topmost) of these items in the display list is used as the destination location for the moved items. This procedure returns an empty list.

(widget-name 'scale tagOrId xOrigin yOrigin xScale yScale)

Rescale all of the items given by tagOrId in canvas coordinate space. XOrigin and yOrigin identify the origin for the scaling operation and xScale and yScale identify the scale factors for x- and y-coordinates, respectively (a scale factor of 1.0 implies no change to that coordinate). For each of the points defining each item, the x-coordinate is adjusted to change the distance from xOrigin by a factor of xScale. Similarly, each y-coordinate is adjusted to change the distance from yOrigin by a factor of yScale. This procedure returns an empty list.

(widget-name 'scan option args)

This procedure is used to implement scanning on canvases. It has two forms, depending on option:

(widget-name 'scan 'mark x y)

Records x and y and the canvas's current view; used in conjunction with later scan dragto procedures. Typically this procedure is associated with a mouse button press in the widget and x and y are the coordinates of the mouse. It returns an empty list.

(widget-name 'scan 'dragto x y)

This procedure computes the difference between its x and y arguments (which are typically mouse coordinates) and the x and y arguments to the last scan mark procedure for the widget. It then adjusts the view by 10 times the difference in coordinates. This procedure is typically associated with mouse motion events in the widget, to produce the effect of dragging the canvas at high speed through its window. The return value is an empty list.

(widget-name 'select option ?tagOrId arg?)

Manipulates the selection in one of several ways, depending on option. The procedure may take any of the forms described below. In all of the descriptions below, tagOrId must refer to an item that supports indexing and selection; if it refers to multiple items then the first of these that supports indexing and the selection is used. Index gives a textual description of a position within tagOrId, as described in INDICES above.

(widget-name 'select adjust tagOrId index)

Locate the end of the selection in tagOrId nearest to the character given by index, and adjust that end of the selection to be at index (i.e. including but not going beyond index). The other end of the selection is made the anchor point for future select to procedures. If the selection isn't currently in tagOrId then this procedure behaves the same as the select to widget procedure. Returns an empty list.

(widget-name 'select 'clear)

Clear the selection if it is in this widget. If the selection isn't in this widget then the procedure has no effect. Returns an empty list.

(widget-name 'select 'from tagOrId index)

Set the selection anchor point for the widget to be just before the character given by index in the item given by tagOrId. This procedure doesn't change the selection; it just sets the fixed end of the selection for future select to procedures. Returns an empty list.

(widget-name 'select 'item)

Returns the id of the selected item, if the selection is in an item in this canvas. If the selection is not in this canvas then an empty list is returned.

(widget-name 'select 'to tagOrId index)

Set the selection to consist of those characters of tagOrId between the selection anchor point and index. The new selection will include the character given by index; it will include the character given by the anchor point only if index is greater than or equal to the anchor point. The anchor point is determined by the most recent select adjust or select from procedure for this widget. If the selection anchor point for the widget isn't currently in tagOrId, then it is set to the same character given by index. Returns an empty list.

(widget-name 'type tagOrId)

Returns the type of the item given by tagOrId, such as rectangle or text. If tagOrId refers to more than one item, then the type of the first item in the display list is returned. If tagOrId doesn't refer to any items at all then an empty list is returned.

(widget-name 'xview ?args?)

This procedure is used to query and change the horizontal position of the information displayed in the canvas's window. It can take any of the following forms:

(widget-name 'xview)

Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the horizontal span that is visible in the window. For example, if the first element is .2 and the second element is .6, 20% of the canvas's area (as defined by the :scrollregion option) is off-screen to the left, the middle 40% is visible in the window, and 40% of the canvas is off-screen to the right. These are the same values passed to scrollbars via the :xscrollcommand option.

(widget-name 'xview 'moveto fraction)

Adjusts the view in the window so that fraction of the total width of the canvas is off-screen to the left. Fraction must be a fraction between 0 and 1.

(widget-name 'xview 'scroll number what)

This procedure shifts the view in the window left or right according to number and what. Number must be an integer. What must be either units or pages or an abbreviation of one of these. If what is units, the view adjusts left or right in units of the xScrollIncrement option, if it is greater than zero, or in units of one-tenth the window's width otherwise. If what is pages then the view adjusts in units of nine-tenths the window's width. If number is negative then information farther to the left becomes visible; if it is positive then information farther to the right becomes visible.

(widget-name 'yview ?args?)

This procedure is used to query and change the vertical position of the information displayed in the canvas's window. It can take any of the following forms:

(widget-name 'yview)

Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the vertical span that is visible in the window. For example, if the first element is .6 and the second element is 1.0, the lowest 40% of the canvas's area (as defined by the :scrollregion option) is visible in the window. These are the same values passed to scrollbars via the :yscrollcommand option.

(widget-name 'yview 'moveto fraction)

Adjusts the view in the window so that fraction of the canvas's area is off-screen to the top. Fraction is a fraction between 0 and 1.

(widget-name 'yview 'scroll number what)

This procedure adjusts the view in the window up or down according to number and what. Number must be an integer. What must be either units or pages. If what is units, the view adjusts up or down in units of the yScrollIncrement option, if it is greater than zero, or in units of one-tenth the window's height otherwise. If what is pages then the view adjusts in units of nine-tenths the window's height. If number is negative then higher information becomes visible; if it is positive then lower information becomes visible.

OVERVIEW OF ITEM TYPES

ARC ITEMS

(widget-name 'create 'arc x1 y1 x2 y2 ?option value option value ...?)

:extent degrees

Specifies the size of the angular range occupied by the arc. The arc's range extends for degrees degrees counter-clockwise from the starting angle given by the :start option. Degrees may be negative. If it is greater than 360 or less than -360, then degrees modulo 360 is used as the extent.

:fill color

Fill the region of the arc with color. Color may have any of the forms accepted by Tk_GetColor. If color is an empty string (the default), then then the arc will not be filled.

:outline color

Color specifies a color to use for drawing the arc's outline; it may have any of the forms accepted by Tk_GetColor. This option defaults to black. If color is specified as an empty string then no outline is drawn for the arc.

:outlinestipple bitmap

Indicates that the outline for the arc should be drawn with a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If the :outline option hasn't been specified then this option has no effect. If bitmap is an empty string (the default), then the outline is drawn in a solid fashion.

:start degrees

Specifies the beginning of the angular range occupied by the arc. Degrees is given in units of degrees measured counter-clockwise from the 3-o'clock position; it may be either positive or negative.

:stipple bitmap

Indicates that the arc should be filled in a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If the :fill option hasn't been specified then this option has no effect. If bitmap is an empty string (the default), then filling is done in a solid fashion.

:style type

Specifies how to draw the arc. If type is pieslice (the default) then the arc's region is defined by a section of the oval's perimeter plus two line segments, one between the center of the oval and each end of the perimeter section. If type is chord then the arc's region is defined by a section of the oval's perimeter plus a single line segment connecting the two end points of the perimeter section. If type is arc then the arc's region consists of a section of the perimeter alone. In this last case the :fill option is ignored.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width outlineWidth

Specifies the width of the outline to be drawn around the arc's region, in any of the forms described in the COORDINATES section above. If the :outline option has been specified as an empty string then this option has no effect. Wide outlines will be drawn centered on the edges of the arc's region. This option defaults to 1.0.

BITMAP ITEMS

(widget-name 'create 'bitmap x y ?option value option value ...?)

:anchor anchorPos

AnchorPos tells how to position the bitmap relative to the positioning point for the item; it may have any of the forms accepted by Tk_GetAnchor. For example, if anchorPos is center then the bitmap is centered on the point; if anchorPos is n then the bitmap will be drawn so that its top center point is at the positioning point. This option defaults to center.

:background color

Specifies a color to use for each of the bitmap pixels whose value is 0. Color may have any of the forms accepted by Tk_GetColor. If this option isn't specified, or if it is specified as an empty string, then nothing is displayed where the bitmap pixels are 0; this produces a transparent effect.

:bitmap bitmap

Specifies the bitmap to display in the item. Bitmap may have any of the forms accepted by Tk_GetBitmap.

:foreground color

Specifies a color to use for each of the bitmap pixels whose value is 1. Color may have any of the forms accepted by Tk_GetColor and defaults to black.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

IMAGE ITEMS

(widget-name 'create 'image x y ?option value option value ...?)

:anchor anchorPos

AnchorPos tells how to position the image relative to the positioning point for the item; it may have any of the forms accepted by Tk_GetAnchor. For example, if anchorPos is center then the image is centered on the point; if anchorPos is n then the image will be drawn so that its top center point is at the positioning point. This option defaults to center.

:image name

Specifies the name of the image to display in the item. This image must have been created previously with the image create procedure.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item; it may be an empty list.

LINE ITEMS

(widget-name 'create 'line x1 y1... xn yn ?option value option value ...?)

:arrow where

Indicates whether or not arrowheads are to be drawn at one or both ends of the line. Where must have one of the values none (for no arrowheads), first (for an arrowhead at the first point of the line), last (for an arrowhead at the last point of the line), or both (for arrowheads at both ends). This option defaults to none.

:arrowshape shape

This option indicates how to draw arrowheads. The shape argument must be a list with three elements, each specifying a distance in any of the forms described in the COORDINATES section above. The first element of the list gives the distance along the line from the neck of the arrowhead to its tip. The second element gives the distance along the line from the trailing points of the arrowhead to the tip, and the third element gives the distance from the outside edge of the line to the trailing points. If this option isn't specified then Tk picks a ``reasonable'' shape.

:capstyle style

Specifies the ways in which caps are to be drawn at the endpoints of the line. Style may have any of the forms accepted by Tk_GetCapStyle (butt, projecting, or round). If this option isn't specified then it defaults to butt. Where arrowheads are drawn the cap style is ignored.

:fill color

Color specifies a color to use for drawing the line; it may have any of the forms acceptable to Tk_GetColor. It may also be an empty string, in which case the line will be transparent. This option defaults to black.

:joinstyle style

Specifies the ways in which joints are to be drawn at the vertices of the line. Style may have any of the forms accepted by Tk_GetCapStyle (bevel, miter, or round). If this option isn't specified then it defaults to miter. If the line only contains two points then this option is irrelevant.

:smooth boolean

Boolean must have one of the forms accepted by Tk_GetBoolean. It indicates whether or not the line should be drawn as a curve. If so, the line is rendered as a set of Bezier splines: one spline is drawn for the first and second line segments, one for the second and third, and so on. Straight-line segments can be generated within a curve by duplicating the end-points of the desired line segment.

:splinesteps number

Specifies the degree of smoothness desired for curves: each spline will be approximated with number line segments. This option is ignored unless the :smooth option is true.

:stipple bitmap

Indicates that the line should be filled in a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If bitmap is an empty string (the default), then filling is done in a solid fashion.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width lineWidth

LineWidth specifies the width of the line, in any of the forms described in the COORDINATES section above. Wide lines will be drawn centered on the path specified by the points. If this option isn't specified then it defaults to 1.0.

OVAL ITEMS

(widget-name 'create 'oval x1 y1 x2 y2 ?option value option value ...?)

:fill color

Fill the area of the oval with color. Color may have any of the forms accepted by Tk_GetColor. If color is an empty string (the default), then then the oval will not be filled.

:outline color

Color specifies a color to use for drawing the oval's outline; it may have any of the forms accepted by Tk_GetColor. This option defaults to black. If color is an empty string then no outline will be drawn for the oval.

:stipple bitmap

Indicates that the oval should be filled in a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If the :fill option hasn't been specified then this option has no effect. If bitmap is an empty string (the default), then filling is done in a solid fashion.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width outlineWidth

outlineWidth specifies the width of the outline to be drawn around the oval, in any of the forms described in the COORDINATES section above. If the :outline option hasn't been specified then this option has no effect. Wide outlines are drawn centered on the oval path defined by x1, y1, x2, and y2. This option defaults to 1.0.

POLYGON ITEMS

(widget-name 'create 'polygon x1 y1 ... xn yn ?option value option value ...?)

:fill color

Color specifies a color to use for filling the area of the polygon; it may have any of the forms acceptable to Tk_GetColor. If color is an empty string then the polygon will be transparent. This option defaults to black.

:outline color

Color specifies a color to use for drawing the polygon's outline; it may have any of the forms accepted by Tk_GetColor. If color is an empty string then no outline will be drawn for the polygon. This option defaults to empty (no outline).

:smooth boolean

Boolean must have one of the forms accepted by Tk_GetBoolean It indicates whether or not the polygon should be drawn with a curved perimeter. If so, the outline of the polygon becomes a set of Bezier splines, one spline for the first and second line segments, one for the second and third, and so on. Straight-line segments can be generated in a smoothed polygon by duplicating the end-points of the desired line segment.

:splinesteps number

Specifies the degree of smoothness desired for curves: each spline will be approximated with number line segments. This option is ignored unless the :smooth option is true.

:stipple bitmap

Indicates that the polygon should be filled in a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If bitmap is an empty string (the default), then filling is done in a solid fashion.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width outlineWidth

OutlineWidth specifies the width of the outline to be drawn around the polygon, in any of the forms described in the COORDINATES section above. If the :outline option hasn't been specified then this option has no effect. This option defaults to 1.0.

Polygon items are different from other items such as rectangles, ovals and arcs in that interior points are considered to be ``inside'' a polygon (e.g. for purposes of the find closest and find overlapping widget commands) even if it is not filled. For most other item types, an interior point is considered to be inside the item only if the item is filled or if it has neither a fill nor an outline. If you would like an unfilled polygon whose interior points are not considered to be inside the polygon, use a line item instead.

RECTANGLE ITEMS

(widget-name 'create 'rectangle x1 y1 x2 y2 ?option value option value ...?)

:fill color

Fill the area of the rectangle with color, which may be specified in any of the forms accepted by Tk_GetColor. If color is an empty string (the default), then the rectangle will not be filled.

:outline color

Draw an outline around the edge of the rectangle in color. Color may have any of the forms accepted by Tk_GetColor. This option defaults to black. If color is an empty string then no outline will be drawn for the rectangle.

:stipple bitmap

Indicates that the rectangle should be filled in a stipple pattern; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If the :fill option hasn't been specified then this option has no effect. If bitmap is an empty string (the default), then filling is done in a solid fashion.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width outlineWidth

OutlineWidth specifies the width of the outline to be drawn around the rectangle, in any of the forms described in the COORDINATES section above. If the :outline option hasn't been specified then this option has no effect. Wide outlines are drawn centered on the rectangular path defined by x1, y1, x2, and y2. This option defaults to 1.0.

TEXT ITEMS

(widget-name 'create 'text x y ?option value option value ...?)

:anchor anchorPos

AnchorPos tells how to position the text relative to the positioning point for the text; it may have any of the forms accepted by Tk_GetAnchor. For example, if anchorPos is center then the text is centered on the point; if anchorPos is n then the text will be drawn such that the top center point of the rectangular region occupied by the text will be at the positioning point. This option defaults to center.

:fill color

Color specifies a color to use for filling the text characters; it may have any of the forms accepted by Tk_GetColor. If this option isn't specified then it defaults to black.

:font fontName

Specifies the font to use for the text item. FontName may be any string acceptable to Tk_GetFontStruct. If this option isn't specified, it defaults to a system-dependent font.

:justify how

Specifies how to justify the text within its bounding region. How must be one of the values left, right, or center. This option will only matter if the text is displayed as multiple lines. If the option is omitted, it defaults to left.

:stipple bitmap

Indicates that the text should be drawn in a stippled pattern rather than solid; bitmap specifies the stipple pattern to use, in any of the forms accepted by Tk_GetBitmap. If bitmap is an empty string (the default) then the text is drawn in a solid fashion.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:text string

String specifies the characters to be displayed in the text item. Newline characters cause line breaks. The characters in the item may also be changed with the insert and delete widget procedures. This option defaults to an empty string.

:width lineLength

Specifies a maximum line length for the text, in any of the forms described in the COORDINATES section above. If this option is zero (the default) the text is broken into lines only at newline characters. However, if this option is non-zero then any line that would be longer than lineLength is broken just before a space character to make the line shorter than lineLength; the space character is treated as if it were a newline character.

WINDOW ITEMS

(widget-name 'create 'window x y ?option value option value ...?)

:anchor anchorPos

AnchorPos tells how to position the window relative to the positioning point for the item; it may have any of the forms accepted by Tk_GetAnchor. For example, if anchorPos is center then the window is centered on the point; if anchorPos is n then the window will be drawn so that its top center point is at the positioning point. This option defaults to center.

:height pixels

Specifies the height to assign to the item's window. Pixels may have any of the forms described in the COORDINATES section above. If this option isn't specified, or if it is specified as an empty string, then the window is given whatever height it requests internally.

:tags tagList

Specifies a set of tags to apply to the item. TagList consists of a list of tag names, which replace any existing tags for the item. TagList may be an empty list.

:width pixels

Specifies the width to assign to the item's window. Pixels may have any of the forms described in the COORDINATES section above. If this option isn't specified, or if it is specified as an empty string, then the window is given whatever width it requests internally.

:window widget-name

Specifies the window to associate with this item. The window specified by widget-name must either be a child of the canvas widget or a child of some ancestor of the canvas widget. PathName may not refer to a top-level window.

APPLICATION-DEFINED ITEM TYPES

BINDINGS

CREDITS

Back to the STk main page