options

DESCRIPTION

In the descriptions below, ``Command-Line Name'' refers to the switch used in class commands and configure widget commands to set this value. For example, if an option's command-line switch is :foreground and there exists a widget .a.b.c, then the command

(.a.b.c  'configure  :foreground "black")

Name: activeBackground

Class: Foreground

Option keyword: :activebackground

STklos slot name: active-background

Specifies background color to use when drawing active elements. An element (a widget or portion of a widget) is active if the mouse cursor is positioned over the element and pressing a mouse button will cause some action to occur. If strict Motif compliance has been requested by setting the *tk-strict-motif* variable, this option will normally be ignored; the normal background color will be used instead.

Name: activeBorderWidth

Class: BorderWidth

Option keyword: :activeborderwidth

STklos slot name: active-border-width

Specifies a non-negative value indicating the width of the 3-D border drawn around active elements. See above for definition of active elements. The value may have any of the forms acceptable to Tk_GetPixels. This option is typically only available in widgets displaying more than one element at a time (e.g. menus but not buttons).

Name: activeForeground

Class: Background

Option keyword: :activeforeground

STklos slot name: active-foreground

Specifies foreground color to use when drawing active elements. See above for definition of active elements.

Name: anchor

Class: Anchor

Option keyword: :anchor

STklos slot name: anchor

Specifies how the information in a widget (e.g. text or a bitmap) is to be displayed in the widget. Must be one of the values n, ne, e, se, s, sw, w, nw, or center. For example, nw means display the information such that its top-left corner is at the top-left corner of the widget.

Name: background

Class: Background

Option keyword: :background

STklos slot name: background

Specifies the normal background color to use when displaying the widget. This option can also be specified as :bg.

Name: bitmap

Class: Bitmap

Option keyword: :bitmap

STklos slot name: bitmap

Specifies a bitmap to display in the widget, in any of the forms acceptable to Tk_GetBitmap. The exact way in which the bitmap is displayed may be affected by other options such as anchor or justify. Typically, if this option is specified then it overrides other options that specify a textual value to display in the widget; the bitmap option may be reset to an empty string to re-enable a text display. In widgets that support both bitmap and image options, image will usually override bitmap.

Name: borderWidth

Class: BorderWidth

Option keyword: :borderwidth

STklos slot name: :border-width

Specifies a non-negative value indicating the width of the 3-D border to draw around the outside of the widget (if such a border is being drawn; the relief option typically determines this). The value may also be used when drawing 3-D effects in the interior of the widget. The value may have any of the forms acceptable to Tk_GetPixels. This option can also be specified as :bd.

Name: cursor

Class: Cursor

Option keyword: :cursor

STklos slot name: cursor

Specifies the mouse cursor to be used for the widget. The value may have any of the forms acceptable to Tk_GetCursor.

Name: disabledForeground

Class: DisabledForeground

Option keyword: :disabledforeground

STklos slot name: disabled-foreground

Specifies foreground color to use when drawing a disabled element. If the option is specified as an empty string (which is typically the case on monochrome displays), disabled elements are drawn with the normal foreground color but they are dimmed by drawing them with a stippled fill pattern.

Name: exportSelection

Class: ExportSelection

Option keyword: :exportselection

STklos slot name: export-selection

Specifies whether or not a selection in the widget should also be the X selection. The value must be a boolean value. If the selection is exported, then selecting in the widget deselects the current X selection, selecting outside the widget deselects any widget selection, and the widget will respond to selection retrieval requests when it has a selection. The default is usually for widgets to export selections.

Name: font

Class: Font

Option keyword: :font

STklos slot name: font

Specifies the font to use when drawing text inside the widget.

Name: foreground

Class: Foreground

Option keyword: :foreground

STklos slot name: foreground

Specifies the normal foreground color to use when displaying the widget. This option can also be specified as :fg.

Name: geometry

Class: Geometry

Option keyword: :geometry

STklos slot name: geometry

Specifies the desired geometry for the widget's window, in the form widthxheight, where width is the desired width of the window and height is the desired height. The units for width and height depend on the particular widget. For widgets displaying text the units are usually the size of the characters in the font being displayed; for other widgets the units are usually pixels.

Name: highlightBackground

Class: HighlightBackground

Option keyword: :highlightbackground

STklos slot name: highlight-background

Specifies the color to display in the traversal highlight region when the widget does not have the input focus.

Name: highlightColor

Class: HighlightColor

Option keyword: :highlightcolor

STklos slot name: highlight-color

Specifies the color to use for the traversal highlight rectangle that is drawn around the widget when it has the input focus.

Name: highlightThickness

Class: HighlightThickness

Option keyword: :highlightthickness

STklos slot name: highlight-thickness

Specifies a non-negative value indicating the width of the highlight rectangle to draw around the outside of the widget when it has the input focus. The value may have any of the forms acceptable to Tk_GetPixels. If the value is zero, no focus highlight is drawn around the widget.

Name: image

Class: Image

Option keyword: :image

STklos slot name: image

Specifies an image to display in the widget, which must have been created with the image create command. Typically, if the image option is specified then it overrides other options that specify a bitmap or textual value to display in the widget; the image option may be reset to an empty string to re-enable a bitmap or text display.

Name: insertBackground

Class: Foreground

Option keyword: :insertbackground

STklos slot name: insert-background

Specifies the color to use as background in the area covered by the insertion cursor. This color will normally override either the normal background for the widget (or the selection background if the insertion cursor happens to fall in the selection).

Name: insertBorderWidth

Class: BorderWidth

Option keyword: :insertborderwidth

STklos slot name: insert-border-width

Specifies a non-negative value indicating the width of the 3-D border to draw around the insertion cursor. The value may have any of the forms acceptable to Tk_GetPixels.

Name: insertOffTime

Class: OffTime

Option keyword: :insertofftime

STklos slot name: insert-off-time

Specifies a non-negative integer value indicating the number of milliseconds the insertion cursor should remain ``off'' in each blink cycle. If this option is zero then the cursor doesn't blink: it is on all the time.

Name: insertOnTime

Class: OnTime

Option keyword: :insertontime

STklos slot name: insert-on-time

Specifies a non-negative integer value indicating the number of milliseconds the insertion cursor should remain ``on'' in each blink cycle.

Name: insertWidth

Class: InsertWidth

Option keyword: :insertwidth

STklos slot name: insert-width

Specifies a value indicating the total width of the insertion cursor. The value may have any of the forms acceptable to Tk_GetPixels. If a border has been specified for the insertion cursor (using the insertBorderWidth option), the border will be drawn inside the width specified by the insertWidth option.

Name: jump

Class: Jump

Option keyword: :jump

STklos slot name: jump

For widgets with a slider that can be dragged to adjust a value, such as scrollbars, this option determines when notifications are made about changes in the value. The option's value must be a boolean of the form accepted by Tcl_GetBoolean. If the value is false, updates are made continuously as the slider is dragged. If the value is true, updates are delayed until the mouse button is released to end the drag; at that point a single notification is made (the value ``jumps'' rather than changing smoothly).

Name: justify

Class: Justify

Option keyword: :justify

STklos slot name: justify

When there are multiple lines of text displayed in a widget, this option determines how the lines line up with each other. Must be one of left, center, or right. Left means that the lines' left edges all line up, center means that the lines' centers are aligned, and right means that the lines' right edges line up.

Name: orient

Class: Orient

Option keyword: :orient

STklos slot name: orientation

For widgets that can lay themselves out with either a horizontal or vertical orientation, such as scrollbars, this option specifies which orientation should be used. Must be either horizontal or vertical or an abbreviation of one of these.

Name: padX

Class: Pad

Option keyword: :padx

STklos slot name: padx

Specifies a non-negative value indicating how much extra space to request for the widget in the X-direction. The value may have any of the forms acceptable to Tk_GetPixels. When computing how large a window it needs, the widget will add this amount to the width it would normally need (as determined by the width of the things displayed in the widget); if the geometry manager can satisfy this request, the widget will end up with extra internal space to the left and/or right of what it displays inside. Most widgets only use this option for padding text: if they are displaying a bitmap or image, then they usually ignore padding options.

Name: padY

Class: Pad

Option keyword: :pady

STklos slot name: pady

Specifies a non-negative value indicating how much extra space to request for the widget in the Y-direction. The value may have any of the forms acceptable to Tk_GetPixels. When computing how large a window it needs, the widget will add this amount to the height it would normally need (as determined by the height of the things displayed in the widget); if the geometry manager can satisfy this request, the widget will end up with extra internal space above and/or below what it displays inside. Most widgets only use this option for padding text: if they are displaying a bitmap or image, then they usually ignore padding options.

Name: relief

Class: Relief

Option keyword: :relief

STklos slot name: relief

Specifies the 3-D effect desired for the widget. Acceptable values are raised, sunken, flat, ridge, and groove. The value indicates how the interior of the widget should appear relative to its exterior; for example, raised means the interior of the widget should appear to protrude from the screen, relative to the exterior of the widget.

Name: repeatDelay

Class: RepeatDelay

Option keyword: :repeatdelay

STklos slot name: repeat-delay

Specifies the number of milliseconds a button or key must be held down before it begins to auto-repeat. Used, for example, on the up- and down-arrows in scrollbars.

Name: repeatInterval

Class: RepeatInterval

Option keyword: :repeatinterval

STklos slot name: repeat-interval

Used in conjunction with repeatDelay: once auto-repeat begins, this option determines the number of milliseconds between auto-repeats.

Name: selectBackground

Class: Foreground

Option keyword: :selectbackground

STklos slot name: select-background

Specifies the background color to use when displaying selected items.

Name: selectBorderWidth

Class: BorderWidth

Option keyword: :selectborderwidth

STklos slot name: select-border-width

Specifies a non-negative value indicating the width of the 3-D border to draw around selected items. The value may have any of the forms acceptable to Tk_GetPixels.

Name: selectForeground

Class: Background

Option keyword: :selectforeground

STklos slot name: select-foreground

Specifies the foreground color to use when displaying selected items.

Name: setGrid

Class: SetGrid

Option keyword: :setgrid

STklos slot name: set-grid

Specifies a boolean value that determines whether this widget controls the resizing grid for its top-level window. This option is typically used in text widgets, where the information in the widget has a natural size (the size of a character) and it makes sense for the window's dimensions to be integral numbers of these units. These natural window sizes form a grid. If the setGrid option is set to true then the widget will communicate with the window manager so that when the user interactively resizes the top-level window that contains the widget, the dimensions of the window will be displayed to the user in grid units and the window size will be constrained to integral numbers of grid units. See the section GRIDDED GEOMETRY MANAGEMENT in the wm manual entry for more details.

Name: takeFocus

Class: TakeFocus

Option keyword: :takefocus

STklos slot name: take-focus

Determines whether the window accepts the focus during keyboard traversal (e.g., Tab and Shift-Tab). Before setting the focus to a window, the traversal scripts consult the value of the takeFocus option. A value of #f means that the window should be skipped entirely during keyboard traversal. #t means that the window should receive the input focus as long as it is viewable (it and all of its ancestors are mapped). An empty string for the option means that the traversal scripts make the decision about whether or not to focus on the window: the current algorithm is to skip the window if it is disabled, if it has no key bindings, or if it is not viewable. Value can also be a one parameter procedure. This procedure is called by the traversal algorithm with the window as parameter. The value retuned by he procedure must be #f, #t, or an empty string: a #f or #t value specifies whether the window will receive the input focus, and an empty string results in the default decision described above. See the focus-next page for the focus-on and focus-off procedures. Note: this interpretation of the option is defined entirely by the STk scripts that implement traversal: the widget implementations ignore the option entirely, so you can change its meaning if you redefine the keyboard traversal scripts.

Name: text

Class: Text

Option keyword: :text

STklos slot name: text

Specifies a string to be displayed inside the widget. The way in which the string is displayed depends on the particular widget and may be determined by other options, such as anchor or justify.

Name: textVariable

Class: Variable

Option keyword: :textvariable

STklos slot name: text-variable

Specifies the name of a variable. The value of the variable is a text string to be displayed inside the widget; if the variable value changes then the widget will automatically update itself to reflect the new value. The way in which the string is displayed in the widget depends on the particular widget and may be determined by other options, such as anchor or justify.

Name: troughColor

Class: Background

Option keyword: :troughcolor

STklos slot name: trough-color

Specifies the color to use for the rectangular trough areas in widgets such as scrollbars and scales.

Name: underline

Class: Underline

Option keyword: :underline

STklos slot name: underline

Specifies the integer index of a character to underline in the widget. This option is used by the default bindings to implement keyboard traversal for menu buttons and menu entries. 0 corresponds to the first character of the text displayed in the widget, 1 to the next character, and so on.

Name: wrapLength

Class: WrapLength

Option keyword: :wraplength

STklos slot name: wrap-length

For widgets that can perform word-wrapping, this option specifies the maximum line length. Lines that would exceed this length are wrapped onto the next line, so that no line is longer than the specified length. The value may be specified in any of the standard forms for screen distances. If this value is less than or equal to 0 then no wrapping is done: lines will break only at newline characters in the text.

Name: xScrollCommand

Class: ScrollCommand

Option keyword: :xscrollcommand

STklos slot name: x-scroll-command

Specifies the procedure used to communicate with horizontal scrollbars. When the view in the widget's window changes (or whenever anything else occurs that could change the display in a scrollbar, such as a change in the total size of the widget's contents), the widget call this procedure with two numbers as parameters. Each of the numbers is a fraction between 0 and 1, which indicates a position in the document. 0 indicates the beginning of the document, 1 indicates the end, .333 indicates a position one third the way through the document, and so on. The first fraction indicates the first information in the document that is visible in the window, and the second fraction indicates the information just after the last portion that is visible. Typically the xScrollCommand option consists of a procedure of the form

(lambda l (apply .x.scrollbar 'set l))

Name: yScrollCommand

Class: ScrollCommand

Option keyword: :yscrollcommand

STklos slot name: y-scroll-command

Specifies the prefix for a command used to communicate with vertical scrollbars. This option is treated in the same way as the xScrollCommand option, except that it is used for vertical scrollbars and is provided by widgets that support vertical scrolling. See the description of xScrollCommand for details on how this option is used.

Back to the STk main page