Make the front page look like the scsh manual by copying the .sty files from

scsh-0.6.3/scsh-manual/

doc/latex/code.sty

@@ -0,0 +1,296 @@
+% code.sty: -*- latex -*-
+% Latex macros for a "weak" verbatim mode.
+% -- like verbatim, except \, {, and } have their usual meanings.
+
+% Environments: code, tightcode,  codeaux, codebox, centercode
+% Commands: \dcd, \cddollar, \cdmath, \cd, \codeallowbreaks, \codeskip, \^
+% Already defined in LaTeX, but of some relevance: \#, \$, \%, \&, \_, \{, \}
+
+% Changelog at the end of the file.
+
+% These commands give you an environment, code, that is like verbatim
+% except that you can still insert commands in the middle of the environment:
+%     \begin{code}
+%     for(x=1; x<loop_bound; x++)
+%         y += x^3; /* {\em Add in {\tt x} cubed} */
+%     \end{code}
+%
+% All characters are ordinary except \{}. To get \{} in your text, 
+% you use the commands \\, \{, and \}.
+
+% These macros mess with the definition of the special chars (e.g., ^_~%).
+% The characters \{} are left alone, so you can still have embedded commands:
+%	\begin{code} f(a,b,\ldots,y,z) \end{code}
+% However, if your embedded commands use the formerly-special chars, as in
+%    	\begin{code} x := x+1 /* \mbox{\em This is $y^3$} */ \end{code}
+% then you lose. The $ and ^ chars are scanned in as non-specials,
+% so they don't work. If the chars are scanned *outside* the code env,
+% then you have no problem:
+% 	\def\ycube{$y^3$}
+% 	\begin{code} x := x+1 /* {\em This is \ycube} */ \end{code}
+% If you must put special chars inside the code env, you do it by
+% prefixing them with the special \dcd ("decode") command, that
+% reverts the chars to back to special status:
+%    	\begin{code} x := x+1 /* {\dcd\em This is $y^3$} */ \end{code}
+% \dcd's scope is bounded by its enclosing braces. It is only defined within
+% the code env. You can also turn on just $ with the \cddollar command;
+% you can turn on just $^_ with the \cdmath command. See below.
+%
+% Alternatively, just use \(...\) for $...$, \sp for ^, and \sb for _.
+
+% WARNING:
+% Like \verb, you cannot put a \cd{...} inside an argument to a macro
+% or a command. If you try, for example,
+%     \mbox{\cd{$x^y$}}
+% you will lose. That is because the text "\cd{$x^y$}" gets read in
+% as \mbox's argument before the \cd executes. But the \cd has to
+% have a chance to run before LaTeX ever reads the $x^y$ so it can
+% turn off the specialness of $ and ^. So, \cd has to appear at
+% top level, not inside an argument. Similarly, you can't have
+% a \cd or a \code inside a macro (Although you could use \gdef to
+% define a macro *inside* a \cd, which you could then use outside.
+% Don't worry about this if you don't understand it.)
+
+% BUG: In the codebox env, the effect of a \dcd, \cddollar, or \cdmath
+%   command is reset at the end of each line. This can be hacked by
+%   messing with the \halign's preamble, if you feel up to it.
+
+% Useage note: the initial newline after the \begin{code} or 
+%   \begin{codebox} is eaten, but the last newline is not.
+%   So,
+%     \begin{code}
+%     foo
+%     bar
+%     \end{code}
+%  leaves one more blank line after bar than does
+%     \begin{code}
+%     foo
+%     bar\end{code}
+%  Moral: get in the habit of terminating code envs without a newline
+%  (as in the second example).
+%
+
+% All this stuff tweaks the meaning of space, tab, and newline.
+%===============================================================================
+% \cd@obeyspaces
+% Turns all spaces into non-breakable spaces.
+% Note: this is like \@vobeyspaces except without spurious space in defn.
+% @xobeysp is basically a space; it's defined in latex.tex.
+%
+{\catcode`\ =\active\gdef\cd@obeyspaces{\catcode`\ =\active\let =\@xobeysp}}
+
+
+
+% \cd@obeytabs
+% Turns all tabs into 8 non-breakable spaces (which is bogus).
+%
+{\catcode`\^^I=\active %
+  \gdef\cd@obeytabs{\catcode`\^^I=\active\let^^I=\cd@tab}}
+
+\def\cd@tab{\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp}
+
+
+
+% \cd@obeylines
+% Turns all cr's into linebreaks. Pagebreaks are not permitted between lines.
+% This is copied from lplain.tex's \obeylines, with the cr def'n changed.
+%
+{\catcode`\^^M=\active % these lines must end with %
+  \gdef\cd@obeylines{\catcode`\^^M=\active\let^^M=\cd@cr}}
+
+% What ^M turns into. This def'n keeps blank lines from being compressed out.
+\def\cd@cr{\par\penalty10000\leavevmode} 	% TeX magicness
+%\def\cd@cr{\par\penalty10000\mbox{}}		% LaTeX
+
+
+% \codeallowbreaks
+% Same as \cd@obeylines, except pagebreaks are allowed.
+% Put this command inside a code env to allow pagebreaks.
+
+{\catcode`\^^M=\active % these lines must end with %
+  \gdef\codeallowbreaks{\catcode`\^^M\active\let^^M\cd@crbr}}
+
+%\def\cd@crbr{\leavevmode\endgraf} % What ^M turns into.
+\def\cd@crbr{\par\leavevmode} % What ^M turns into.
+
+
+% \cd@obeycrsp 
+% Turns cr's into non-breakable spaces. Used by \cd.
+
+{\catcode`\^^M=\active % these lines must end with %
+  \gdef\cd@obeycrsp{\catcode`\^^M=\active\let^^M=\@xobeysp}}
+
+% =============================================================================
+
+% Set up code environment, in which most of the common special characters
+% appearing in code are treated verbatim, namely: $&#^_~%
+% \ { } are still enabled so that macros can be called in this
+% environment.  Use \\, \{, and \} to use these characters verbatim
+% in this environment.
+% 
+% Inside a group, you can make
+% all the hacked chars	special with the	\dcd		command
+% $			special with the 	\cddollar	command
+% $^_			special with the	\cdmath		command.
+% If you have a bunch of math $..$'s in your code env, then a global \cddollar
+% or \cdmath at the beginning of the env can save a lot of trouble.
+% When chars are special (e.g., after a \dcd), you can still get #$%&_{} with
+% \#, \$, \%, \&, \_, \{, and \} -- this is standard LaTeX.
+% Additionally, \\ gives \ inside the code env, and when \cdmath
+% makes ^ special, it also defines \^ to give ^.
+
+%The hacked characters can be made special again
+% within a group by using the \dcd command.
+
+% Note: this environment allows no breaking of lines whatsoever; not
+% at spaces or hypens.  To arrange for a break use the standard \- command,
+% or a \discretionary{}{}{} which breaks, but inserts nothing.  This is useful,
+% for example for allowing hypenated identifiers to be broken, e.g.
+% \def\={\discretionary{}{}{}} %optional break
+% FOO-\=BAR.
+
+\def\setupcode{\parsep=0pt\parindent=0pt%
+  \normalfont\ttfamily\frenchspacing\catcode``=13\@noligs%
+  \def\\{\char`\\}%
+  \let\dcd=\cd@dcd\let\cddollar=\cd@dollarspecial\let\cdmath=\cd@mathspecial%
+  \@makeother\$\@makeother\&\@makeother\#%
+  \@makeother\^\@makeother\_\@makeother\~%
+  \@makeother\%\cd@obeytabs\cd@obeyspaces}
+% other: $&#^_~%
+% left special: \{}
+% unnecessary: @`'"
+
+
+%% codebox, centercode
+%%=============================================================================
+%% The codebox env makes a box exactly as wide as it needs to be
+%% (i.e., as wide as the longest line of code is). This is useful
+%% if you want to center a chunk of code, or flush it right, or
+%% something like that. The optional argument to the environment,
+%% [t], [c], or [b], specifies how to vertically align the codebox,
+%% just as with arrays or other boxes. Default is [c].
+
+%% Must be a newline immediately after "\begin{codebox}[t]"!
+
+{\catcode`\^^M=\active % these lines must end with %
+  \gdef\cd@obeycr{\catcode`\^^M=\active\let^^M=\cr}}
+
+% If there is a [<letter>] option, then the following newline will
+% be read *after* ^M is bound to \cr, so we're cool. If there isn't
+% an option given (i.e., default to [c]), then the @\ifnextchar will
+% gobble up the newline as it gobbles whitespace. So we insert the
+% \cr explicitly. Isn't TeX fun?
+\def\codebox{\leavevmode\@ifnextchar[{\@codebox}{\@codebox[c]\cr}} %]
+
+\def\@codebox[#1]%
+  {\hbox\bgroup$\if #1t\vtop \else \if#1b\vbox \else \vcenter \fi\fi\bgroup%
+   \tabskip\z@\setupcode\cd@obeycr% just before cd@obey
+   \halign\bgroup##\hfil\span}
+
+\def\endcodebox{\crcr\egroup\egroup\m@th$\egroup}
+
+% Center the box on the page:
+\newenvironment{centercode}%
+  {\begin{center}\begin{codebox}[c]}%
+  {\end{codebox}\end{center}}
+
+
+%% code, codeaux, tightcode
+%%=============================================================================
+%% Code environment as described above. Lines are kept on one page.
+%% This actually works by setting a huge penalty for breaking
+%% between lines of code. Code is indented same as other displayed paras.
+%% Note: to increase left margin, use \begin{codeaux}{\leftmargin=1in}.
+
+% To allow pagebreaks, say \codeallowbreaks immediately inside the env.
+% You can allow breaks at specific lines with a \pagebreak form.
+
+%% N.B.: The \global\@ignoretrue command must be performed just inside
+%% the *last* \end{...} before the following text. If not, you will
+%% get an extra space on the following line. Blech.
+
+%% This environment takes two arguments. 
+%% The second, required argument is the \list parameters to override the
+%%     \@listi... defaults.
+%%     - Usefully set by clients: \topsep \leftmargin
+%%     - Possible, but less useful: \partopsep
+%% The first, optional argument is the extra \parskip glue that you get around
+%%     \list environments. It defaults to the value of \parskip.
+\def\codeaux{\@ifnextchar[{\@codeaux}{\@codeaux[\parskip]}} %]
+\def\@codeaux[#1]#2{%
+  \bgroup\parskip#1%
+	 \begin{list}{}%
+	       {\parsep\z@\rightskip\z@\listparindent\z@\itemindent\z@#2}%
+	       \item[]\setupcode\cd@obeylines}%
+\def\endcodeaux{\end{list}\leavevmode\egroup\ignorespaces\global\@ignoretrue}
+
+%% Code env is codeaux with the default margin and spacing \list params:
+\def\code{\codeaux{}} \let\endcode=\endcodeaux
+
+%% Like code, but with no extra vertical space above and below.
+\def\tightcode{\codeaux[=0pt]{\topsep\z@}}%
+\let\endtightcode\endcodeaux
+%  {\vspace{-1\parskip}\begin{codeaux}{\partopsep\z@\topsep\z@}}%
+%  {\end{codeaux}\vspace{-1\parskip}}
+
+
+
+% Reasonable separation between lines of code
+\newcommand{\codeskip}{\penalty0\vspace{2ex}}
+
+
+% \cd is used to build a code environment in the middle of text.
+% Note: only difference from display code is that cr's are taken
+% as unbreakable spaces instead of linebreaks.
+
+\def\cd{\leavevmode\begingroup\ifmmode\let\startcode=\startmcode\else%
+	\let\startcode\starttcode\fi%
+	\setupcode\cd@obeycrsp\startcode}
+
+\def\starttcode#1{#1\endgroup}
+\def\startmcode#1{\hbox{#1}\endgroup}
+
+
+% Restore $&#^_~% to their normal catcodes
+% Define \^ to give the ^ char.
+% \dcd points to this guy inside a code env.
+\def\cd@dcd{\catcode`\$=3\catcode`\&=4\catcode`\#=6\catcode`\^=7%
+	   \catcode`\_=8\catcode`\~=13\catcode`\%=14\def\^{\char`\^}}
+
+% Selectively enable $, and $^_ as special.
+% \cd@mathspecial also defines \^ give the ^ char.
+% \cddollar and \cdmath point to these guys inside a code env.
+\def\cd@dollarspecial{\catcode`\$=3}
+\def\cd@mathspecial{\catcode`\$=3\catcode`\^=7\catcode`\_=8%
+		    \def\^{\char`\^}}
+
+
+% Change log:
+% Started off as some macros found in C. Rich's library.
+% Olin 1/90:
+% Removed \makeatletter, \makeatother's -- they shouldn't be there,
+%   because style option files are read with makeatletter. The terminal
+%   makeatother screwed things up for the following style options.
+% Olin 3/91:
+% Rewritten. 
+% - Changed things so blank lines don't get compressed out (the \leavevmove
+%   in \cd@cr and \cd@crwb). 
+% - Changed names to somewhat less horrible choices. 
+% - Added lots of doc, so casual hackers can more easily mess with all this.
+% - Removed `'"@ from the set of hacked chars, since they are already
+%   non-special. 
+% - Removed the bigcode env, which effect can be had with the \codeallowbreaks
+%   command.
+% - Removed the \@noligs command, since it's already defined in latex.tex.
+% - Win big with the new \dcd, \cddollar, and \cdmath commands.
+% - Now, *only* the chars \{} are special inside the code env. If you need
+%   more, use the \dcd command inside a group.
+% - \cd now works inside math mode. (But if you use it in a superscript,
+%   it still comes out full size. You must explicitly put a \scriptsize\tt
+%   inside the \cd: $x^{\cd{\scriptsize\tt...}}$. A \leavevmode was added
+%   so that if you begin a paragraph with a \cd{...}, TeX realises you
+%   are starting a paragraph.
+% - Added the codebox env. Tricky bit involving the first line hacked
+%   with help from David Long.
+% Olin 8/94
+% Changed the font commands for LaTeX2e.

doc/latex/ct.sty

@@ -0,0 +1,6 @@
+% Loads cmtt fonts in on \tt. -*- latex -*-
+% I prefer these to the Courier fonts that latex gives you w/postscript styles.
+% Courier is too spidery and too wide -- it's hard to get 80 chars on a line.
+%	-Olin
+
+\renewcommand{\ttdefault}{cmtt}

doc/latex/headings.sty

@@ -0,0 +1,16 @@
+% headings.tex -*- latex -*-
+% Quieter headings that the ones used in article.sty.
+% This is not a style option. Don't say [headings].
+% Instead, say \input{headings} after the \documentstyle.
+%	-Olin 7/91
+
+\makeatletter
+
+\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus 
+ -.2ex}{2.3ex plus .2ex}{\large\normalfont\bfseries}}
+\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus 
+ -.2ex}{1.5ex plus .2ex}{\normalsize\normalfont\bfseries}}
+\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus 
+-1ex minus -.2ex}{1.5ex plus .2ex}{\normalsize\normalfont\bfseries}}
+
+\makeatother

doc/latex/man.tex

@@ -1,16 +1,56 @@
-\documentclass{report}
+% -*- latex -*-
+
+% This is the reference manual for the Scheme Untergrund Networking Package.
+
+\documentclass[twoside]{report}
+\usepackage{code,boxedminipage,makeidx,palatino,ct,
+            headings,mantitle,array,matter,mysize10,tex2page}
 
 \usepackage[latin1]{inputenc}
 \usepackage{alltt}
-\usepackage{tex2page}
 
-\author{Olin Shivers \and Mike Sperber \and Martin Gasbichler \and
-  Eric Marsden \and Andreas Bernauer}
-\title{The Scheme Untergrund Networking Package}
+\texonly
+% tex2page defines \url and hyperref loads the package url
+% but setting \url to \relax satisfies \newcommand
+\let\url\relax
+\input{pdfcond}
+\ifpdf
+\usepackage[pdftex,hyperindex,
+     pdftitle={sunet manual, release 2.0},
+     pdfauthor={Olin Shivers, Mike Sperber, Martin Gasbichler, Eric Marsden 
+       and Andreas Bernauer}
+     colorlinks=true,linkcolor=blue,pagecolor=blue,urlcolor=blue,
+     pdfstartview=FitH,pdfview=FitH]{hyperref}
+\usepackage{thumbpdf}
+\usepackage{tocbibind}
+\else
+\usepackage[dvipdfm,hyperindex,hypertex,
+     pdftitle={sunet manual, release 2.0},
+     pdfauthor={Olin Shivers, Mike Sperber, Martin Gasbichler, Eric Marsden 
+       and Andreas Bernauer}
+     colorlinks=true,linkcolor=blue,pagecolor=blue,urlcolor=blue,
+     pdfstartview=FitH,pdfview=FitH]{hyperref}
+\fi
+\endtexonly
+
+% Style issues
+\parskip = 3pt plus 3pt  
+\sloppy  
 
 \input{decls}
+\makeindex
+%%% End preamble
+
 
 \begin{document}
+
+\frontmatter 
+\title{SUnet Reference Manual}
+\subtitle{For SUnet release 2.0}
+\author{Dr. S, Dr. S, Martin Gasbichler, Eric Marsden, Andreas Bernauer}
+\date{January 2003}
+
+\mainmatter
 \maketitle
 \begin{abstract}
   \noindent The Scheme Untergrund Network Package (\textit{SUnet} for short) is
@@ -35,4 +75,8 @@
 \include{nettime}
 \include{smtp}
 \include{pop3}
+
+\backmatter
+\printindex
+
 \end{document}

doc/latex/mantitle.sty

@@ -0,0 +1,76 @@
+% This is the title page style stolen from the Texinfo design,
+% and expressed as a LaTeX style option. It is useful for manuals.
+%
+% Note that I play some *really* revolting games here to override
+% the vertical and horizontal margins temporarily for the title page.
+% The layout assumes you have 8.5" x 11" paper. You'd have to redo this
+% for A4 or another size.
+%     -Olin 7/94
+
+
+% Fonts for title page:
+\DeclareFixedFont{\titlefont}%
+	{\encodingdefault}{\familydefault}{bx}{\shapedefault}{20.5pt}
+\DeclareFixedFont{\authorfnt}%
+	{\encodingdefault}{\familydefault}{bx}{\shapedefault}{14.4pt}
+\DeclareFixedFont{\subtitlefnt}%
+	{\encodingdefault}{\familydefault}{m}{\shapedefault}{11}
+
+%\def\authorrm{\normalfont\selectfont\fontseries{bx}\fontsize{14.4}{14.4}}
+%\def\subtitlefnt{\normalfont\selectfont\fontsize{11}{11}}
+
+\newskip\titlepagetopglue \titlepagetopglue = 2.5in
+
+
+\newlength{\widewidth}
+\setlength{\widewidth}{6.5in}
+\newlength{\negwidemargin}
+\setlength{\negwidemargin}{-\oddsidemargin}	% Reset the margin
+\addtolength{\negwidemargin}{-1in}		% to edge of page
+\addtolength{\negwidemargin}{1in}	    % Then move right one inch.
+
+%\def\wideline#1{\hbox to 0pt{\hspace\negwidemargin\hbox to\widewidth{#1}}}
+\def\wideline#1{\hbox{\makebox[0pt][l]{\hspace\negwidemargin\hbox to\widewidth{#1}}}}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\def\maketitle{\begin{titlepage}
+   \thispagestyle{empty}
+   \let\footnotesize\small \let\footnoterule\relax
+   \null
+   \parindent=0pt
+   \def\subtitlefont{\normalbaselineskip = 13pt \normalbaselines \subtitlefnt}%
+   \def\authorfont{\normalbaselineskip = 16pt \normalbaselines \authorfnt}%
+%
+   % Leave some space at the very top of the page.
+   \vspace*{-1in}\vspace*{-\topmargin}\vspace*{-\headheight}\vspace*{-\headsep}
+   \vglue\titlepagetopglue
+%
+   \wideline{\titlefont \@title \hfill} % title
+%  \vskip4pt 
+   \vskip -0.3\baselineskip
+   \wideline{\leaders\hrule height 4pt\hfill}
+   \wideline{\hfill\subtitlefont\begin{tabular}[t]{@{}r@{}}\@subtitle%
+				\\\@date%
+			        \end{tabular}} % subtitle
+%
+   % author
+   \vskip 0pt plus 1filll 
+   \wideline{\authorfont \begin{tabular}[t]{@{}c@{}}\@author
+                         \end{tabular}\hfill}
+%
+%  \vskip4pt
+   \vskip -0.3\baselineskip
+   \wideline{\leaders\hrule height 2pt\hfill}
+
+   % This weirdness puts the bottom line 2.75 in from the bottom of
+   % an 11in page.
+   \vskip \textheight \vskip \headsep \vskip \headheight
+   \vskip \topmargin  \vskip 1in \vskip -11in \vskip 2.75in
+
+   \gdef\@author{}\gdef\@title{}\gdef\@subtitle{}\let\maketitle\relax
+   \end{titlepage}
+   \setcounter{page}{2}
+   }
+
+\def\subtitle#1{\gdef\@subtitle{#1}}
+\def\@subtitle{}

doc/latex/matter.sty

@@ -0,0 +1,16 @@
+%&latex -*- latex -*-
+% Implement the \frontmatter, \mainmatter, and \backmatter macros,
+% so I can use them in reports, not just books.
+
+\newif\if@mainmatter \@mainmattertrue
+
+\newcommand\frontmatter{%
+	\cleardoublepage\@mainmatterfalse\pagenumbering{roman}}
+
+\newcommand\mainmatter{%
+	\cleardoublepage\@mainmattertrue%
+	\pagenumbering{arabic}\setcounter{page}{1}}
+
+\newcommand\backmatter{%
+	\if@openright\cleardoublepage\else\clearpage\fi%
+	\@mainmatterfalse}

doc/latex/mysize10.sty

@@ -0,0 +1,22 @@
+%&latex -*- latex -*-
+\if@twoside
+   \oddsidemargin 44pt
+   \evensidemargin 82pt
+   \marginparwidth 107pt
+\else
+   \oddsidemargin 63pt
+   \evensidemargin 63pt
+   \marginparwidth 90pt
+\fi
+\marginparsep 11pt
+
+\topmargin 27pt
+\headheight 12pt
+\headsep 25pt
+\topskip = 10pt
+\footskip 30pt
+
+\textheight = 43\baselineskip
+\advance\textheight by \topskip
+\textwidth 345pt
+\endinput

doc/latex/pdfcond.tex

@@ -0,0 +1,14 @@
+\newif\ifpdf
+\ifx\pdfoutput\undefined
+\pdffalse    % we are not running PDFLaTeX
+\else
+\pdfoutput=1    % we are running PDFLaTeX
+\pdftrue
+\fi
+% Then use your new variable \ifpdf
+% \ifpdf
+% \usepackage[pdftex]{graphicx}
+% \pdfcompresslevel=9
+% \else
+% \usepackage{graphicx}
+% \fi