scsh-0.6/doc/scsh-manual/code.sty

297 lines
12 KiB
TeX
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

% code.sty: -*- latex -*-
% Latex macros for a "weak" verbatim mode.
% -- like verbatim, except \, {, and } have their usual meanings.
% Environments: code, tightcode, codeaux, codebox, centercode
% Commands: \dcd, \cddollar, \cdmath, \cd, \codeallowbreaks, \codeskip, \^
% Already defined in LaTeX, but of some relevance: \#, \$, \%, \&, \_, \{, \}
% Changelog at the end of the file.
% These commands give you an environment, code, that is like verbatim
% except that you can still insert commands in the middle of the environment:
% \begin{code}
% for(x=1; x<loop_bound; x++)
% y += x^3; /* {\em Add in {\tt x} cubed} */
% \end{code}
%
% All characters are ordinary except \{}. To get \{} in your text,
% you use the commands \\, \{, and \}.
% These macros mess with the definition of the special chars (e.g., ^_~%).
% The characters \{} are left alone, so you can still have embedded commands:
% \begin{code} f(a,b,\ldots,y,z) \end{code}
% However, if your embedded commands use the formerly-special chars, as in
% \begin{code} x := x+1 /* \mbox{\em This is $y^3$} */ \end{code}
% then you lose. The $ and ^ chars are scanned in as non-specials,
% so they don't work. If the chars are scanned *outside* the code env,
% then you have no problem:
% \def\ycube{$y^3$}
% \begin{code} x := x+1 /* {\em This is \ycube} */ \end{code}
% If you must put special chars inside the code env, you do it by
% prefixing them with the special \dcd ("decode") command, that
% reverts the chars to back to special status:
% \begin{code} x := x+1 /* {\dcd\em This is $y^3$} */ \end{code}
% \dcd's scope is bounded by its enclosing braces. It is only defined within
% the code env. You can also turn on just $ with the \cddollar command;
% you can turn on just $^_ with the \cdmath command. See below.
%
% Alternatively, just use \(...\) for $...$, \sp for ^, and \sb for _.
% WARNING:
% Like \verb, you cannot put a \cd{...} inside an argument to a macro
% or a command. If you try, for example,
% \mbox{\cd{$x^y$}}
% you will lose. That is because the text "\cd{$x^y$}" gets read in
% as \mbox's argument before the \cd executes. But the \cd has to
% have a chance to run before LaTeX ever reads the $x^y$ so it can
% turn off the specialness of $ and ^. So, \cd has to appear at
% top level, not inside an argument. Similarly, you can't have
% a \cd or a \code inside a macro (Although you could use \gdef to
% define a macro *inside* a \cd, which you could then use outside.
% Don't worry about this if you don't understand it.)
% BUG: In the codebox env, the effect of a \dcd, \cddollar, or \cdmath
% command is reset at the end of each line. This can be hacked by
% messing with the \halign's preamble, if you feel up to it.
% Useage note: the initial newline after the \begin{code} or
% \begin{codebox} is eaten, but the last newline is not.
% So,
% \begin{code}
% foo
% bar
% \end{code}
% leaves one more blank line after bar than does
% \begin{code}
% foo
% bar\end{code}
% Moral: get in the habit of terminating code envs without a newline
% (as in the second example).
%
% All this stuff tweaks the meaning of space, tab, and newline.
%===============================================================================
% \cd@obeyspaces
% Turns all spaces into non-breakable spaces.
% Note: this is like \@vobeyspaces except without spurious space in defn.
% @xobeysp is basically a space; it's defined in latex.tex.
%
{\catcode`\ =\active\gdef\cd@obeyspaces{\catcode`\ =\active\let =\@xobeysp}}
% \cd@obeytabs
% Turns all tabs into 8 non-breakable spaces (which is bogus).
%
{\catcode`\^^I=\active %
\gdef\cd@obeytabs{\catcode`\^^I=\active\let^^I=\cd@tab}}
\def\cd@tab{\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp\@xobeysp}
% \cd@obeylines
% Turns all cr's into linebreaks. Pagebreaks are not permitted between lines.
% This is copied from lplain.tex's \obeylines, with the cr def'n changed.
%
{\catcode`\^^M=\active % these lines must end with %
\gdef\cd@obeylines{\catcode`\^^M=\active\let^^M=\cd@cr}}
% What ^M turns into. This def'n keeps blank lines from being compressed out.
\def\cd@cr{\par\penalty10000\leavevmode} % TeX magicness
%\def\cd@cr{\par\penalty10000\mbox{}} % LaTeX
% \codeallowbreaks
% Same as \cd@obeylines, except pagebreaks are allowed.
% Put this command inside a code env to allow pagebreaks.
{\catcode`\^^M=\active % these lines must end with %
\gdef\codeallowbreaks{\catcode`\^^M\active\let^^M\cd@crbr}}
%\def\cd@crbr{\leavevmode\endgraf} % What ^M turns into.
\def\cd@crbr{\par\leavevmode} % What ^M turns into.
% \cd@obeycrsp
% Turns cr's into non-breakable spaces. Used by \cd.
{\catcode`\^^M=\active % these lines must end with %
\gdef\cd@obeycrsp{\catcode`\^^M=\active\let^^M=\@xobeysp}}
% =============================================================================
% Set up code environment, in which most of the common special characters
% appearing in code are treated verbatim, namely: $&#^_~%
% \ { } are still enabled so that macros can be called in this
% environment. Use \\, \{, and \} to use these characters verbatim
% in this environment.
%
% Inside a group, you can make
% all the hacked chars special with the \dcd command
% $ special with the \cddollar command
% $^_ special with the \cdmath command.
% If you have a bunch of math $..$'s in your code env, then a global \cddollar
% or \cdmath at the beginning of the env can save a lot of trouble.
% When chars are special (e.g., after a \dcd), you can still get #$%&_{} with
% \#, \$, \%, \&, \_, \{, and \} -- this is standard LaTeX.
% Additionally, \\ gives \ inside the code env, and when \cdmath
% makes ^ special, it also defines \^ to give ^.
%The hacked characters can be made special again
% within a group by using the \dcd command.
% Note: this environment allows no breaking of lines whatsoever; not
% at spaces or hypens. To arrange for a break use the standard \- command,
% or a \discretionary{}{}{} which breaks, but inserts nothing. This is useful,
% for example for allowing hypenated identifiers to be broken, e.g.
% \def\={\discretionary{}{}{}} %optional break
% FOO-\=BAR.
\def\setupcode{\parsep=0pt\parindent=0pt%
\normalfont\ttfamily\frenchspacing\catcode``=13\@noligs%
\def\\{\char`\\}%
\let\dcd=\cd@dcd\let\cddollar=\cd@dollarspecial\let\cdmath=\cd@mathspecial%
\@makeother\$\@makeother\&\@makeother\#%
\@makeother\^\@makeother\_\@makeother\~%
\@makeother\%\cd@obeytabs\cd@obeyspaces}
% other: $&#^_~%
% left special: \{}
% unnecessary: @`'"
%% codebox, centercode
%%=============================================================================
%% The codebox env makes a box exactly as wide as it needs to be
%% (i.e., as wide as the longest line of code is). This is useful
%% if you want to center a chunk of code, or flush it right, or
%% something like that. The optional argument to the environment,
%% [t], [c], or [b], specifies how to vertically align the codebox,
%% just as with arrays or other boxes. Default is [c].
%% Must be a newline immediately after "\begin{codebox}[t]"!
{\catcode`\^^M=\active % these lines must end with %
\gdef\cd@obeycr{\catcode`\^^M=\active\let^^M=\cr}}
% If there is a [<letter>] option, then the following newline will
% be read *after* ^M is bound to \cr, so we're cool. If there isn't
% an option given (i.e., default to [c]), then the @\ifnextchar will
% gobble up the newline as it gobbles whitespace. So we insert the
% \cr explicitly. Isn't TeX fun?
\def\codebox{\leavevmode\@ifnextchar[{\@codebox}{\@codebox[c]\cr}} %]
\def\@codebox[#1]%
{\hbox\bgroup$\if #1t\vtop \else \if#1b\vbox \else \vcenter \fi\fi\bgroup%
\tabskip\z@\setupcode\cd@obeycr% just before cd@obey
\halign\bgroup##\hfil\span}
\def\endcodebox{\crcr\egroup\egroup\m@th$\egroup}
% Center the box on the page:
\newenvironment{centercode}%
{\begin{center}\begin{codebox}[c]}%
{\end{codebox}\end{center}}
%% code, codeaux, tightcode
%%=============================================================================
%% Code environment as described above. Lines are kept on one page.
%% This actually works by setting a huge penalty for breaking
%% between lines of code. Code is indented same as other displayed paras.
%% Note: to increase left margin, use \begin{codeaux}{\leftmargin=1in}.
% To allow pagebreaks, say \codeallowbreaks immediately inside the env.
% You can allow breaks at specific lines with a \pagebreak form.
%% N.B.: The \global\@ignoretrue command must be performed just inside
%% the *last* \end{...} before the following text. If not, you will
%% get an extra space on the following line. Blech.
%% This environment takes two arguments.
%% The second, required argument is the \list parameters to override the
%% \@listi... defaults.
%% - Usefully set by clients: \topsep \leftmargin
%% - Possible, but less useful: \partopsep
%% The first, optional argument is the extra \parskip glue that you get around
%% \list environments. It defaults to the value of \parskip.
\def\codeaux{\@ifnextchar[{\@codeaux}{\@codeaux[\parskip]}} %]
\def\@codeaux[#1]#2{%
\bgroup\parskip#1%
\begin{list}{}%
{\parsep\z@\rightskip\z@\listparindent\z@\itemindent\z@#2}%
\item[]\setupcode\cd@obeylines}%
\def\endcodeaux{\end{list}\leavevmode\egroup\ignorespaces\global\@ignoretrue}
%% Code env is codeaux with the default margin and spacing \list params:
\def\code{\codeaux{}} \let\endcode=\endcodeaux
%% Like code, but with no extra vertical space above and below.
\def\tightcode{\codeaux[=0pt]{\topsep\z@}}%
\let\endtightcode\endcodeaux
% {\vspace{-1\parskip}\begin{codeaux}{\partopsep\z@\topsep\z@}}%
% {\end{codeaux}\vspace{-1\parskip}}
% Reasonable separation between lines of code
\newcommand{\codeskip}{\penalty0\vspace{2ex}}
% \cd is used to build a code environment in the middle of text.
% Note: only difference from display code is that cr's are taken
% as unbreakable spaces instead of linebreaks.
\def\cd{\leavevmode\begingroup\ifmmode\let\startcode=\startmcode\else%
\let\startcode\starttcode\fi%
\setupcode\cd@obeycrsp\startcode}
\def\starttcode#1{#1\endgroup}
\def\startmcode#1{\hbox{#1}\endgroup}
% Restore $&#^_~% to their normal catcodes
% Define \^ to give the ^ char.
% \dcd points to this guy inside a code env.
\def\cd@dcd{\catcode`\$=3\catcode`\&=4\catcode`\#=6\catcode`\^=7%
\catcode`\_=8\catcode`\~=13\catcode`\%=14\def\^{\char`\^}}
% Selectively enable $, and $^_ as special.
% \cd@mathspecial also defines \^ give the ^ char.
% \cddollar and \cdmath point to these guys inside a code env.
\def\cd@dollarspecial{\catcode`\$=3}
\def\cd@mathspecial{\catcode`\$=3\catcode`\^=7\catcode`\_=8%
\def\^{\char`\^}}
% Change log:
% Started off as some macros found in C. Rich's library.
% Olin 1/90:
% Removed \makeatletter, \makeatother's -- they shouldn't be there,
% because style option files are read with makeatletter. The terminal
% makeatother screwed things up for the following style options.
% Olin 3/91:
% Rewritten.
% - Changed things so blank lines don't get compressed out (the \leavevmove
% in \cd@cr and \cd@crwb).
% - Changed names to somewhat less horrible choices.
% - Added lots of doc, so casual hackers can more easily mess with all this.
% - Removed `'"@ from the set of hacked chars, since they are already
% non-special.
% - Removed the bigcode env, which effect can be had with the \codeallowbreaks
% command.
% - Removed the \@noligs command, since it's already defined in latex.tex.
% - Win big with the new \dcd, \cddollar, and \cdmath commands.
% - Now, *only* the chars \{} are special inside the code env. If you need
% more, use the \dcd command inside a group.
% - \cd now works inside math mode. (But if you use it in a superscript,
% it still comes out full size. You must explicitly put a \scriptsize\tt
% inside the \cd: $x^{\cd{\scriptsize\tt...}}$. A \leavevmode was added
% so that if you begin a paragraph with a \cd{...}, TeX realises you
% are starting a paragraph.
% - Added the codebox env. Tricky bit involving the first line hacked
% with help from David Long.
% Olin 8/94
% Changed the font commands for LaTeX2e.