# Generated automatically from Makefile.in by configure. # Scheme 48 Makefile # Documentation in files INSTALL and doc/install.txt SHELL = /bin/sh ### Filled in by `configure' ### srcdir = . CC = gcc DEFS = -DHAVE_CONFIG_H LIBS = -lm CFLAGS = -O2 INSTALL = /usr/local/bin/install -c INSTALL_PROGRAM = ${INSTALL} INSTALL_DATA = ${INSTALL} -m 644 LDFLAGS = -g LIBOBJS = RM = rm -f AR = ar cq RANLIB = ranlib prefix = /home/ai/marting/install06 exec_prefix = ${prefix} ### End of `configure' section### bindir = $(exec_prefix)/bin libdir = $(exec_prefix)/lib incdir = $(exec_prefix)/include manext = 1 mandir = $(prefix)/man/man$(manext) # HP 9000 series, if you don't have gcc # CC = cc # CFLAGS = -Aa -O +Obb1800 # DEFS = -D_HPUX_SOURCE -Dhpux # Ultrix # LDFLAGS = -N .c.o: $(CC) -c $(CPPFLAGS) $(DEFS) -I$(srcdir)/c -I$(srcdir)/cig $(CFLAGS) -o $@ $< # You might want to change RUNNABLE to "s48" RUNNABLE = scsh06 MANPAGE = $(RUNNABLE).$(manext) LIB = $(libdir)/$(RUNNABLE) distdir = /tmp # If make barfs on this include line, just comment it out. It's only # really needed if you want to build the linker or rebuild initial.image. include $(srcdir)/build/filenames.make # #NetBSD make wants to see this instead: #.include "$(srcdir)/build/filenames.make" # Static linker: # # You only need the linker if you're going to make changes to the # things that go into the initial.image, which in general means the # files in rts/. If you decide you need to use the linker, then you # gots your choice; it can run in just about any version of Scheme 48 # or Pseudoscheme. (It has also been made to run in Scheme->C.) It # doesn't matter a whole lot which Scheme you use as long as it's not # broken or unavailable. The two best choices are: # 1. As below: build the linker on the scheme48vm and scheme48.image # that are in the current directory. # 2. LINKER_VM = $(RUNNABLE) $(BIG_HEAP) # LINKER_RUNNABLE = $(RUNNABLE) # These settings requires you to already have a $(RUNNABLE) # command. This is desirable if you are making changes to the # system that might break scheme48vm and/or scheme48.image. But it # requires you to have squirreled away a previous working version # of scheme48. BIG_HEAP = -h 5000000 # JMG: 1. is broken ... # LINKER_VM = ./$(VM) $(BIG_HEAP) # LINKER_RUNNABLE = $(LINKER_VM) -i $(IMAGE) # JMG now according 2 LINKER_VM = /home/ai/marting/lib/scheme48/scheme48vm $(BIG_HEAP) LINKER_RUNNABLE = s4853 LINKER_IMAGE = build/linker.image LINKER = $(LINKER_VM) -i $(LINKER_IMAGE) START_LINKER = echo ',batch' && echo ',bench on' # -------------------- # You shouldn't have to change anything below this point, except for possibly # the external code rules. # Targets: IMAGE = scsh.image INITIAL = build/initial.image #JMG: renamed the vm #JMG: we need cig at the moment VM = scsh06vm LIBCIG = cig/lib$(VM).a CIG = cig/cig CIGOBJS = cig/libcig.o cig/libcig1.o #JMG: the scsh-lib LIBSCSH = scsh/lib$(VM).a SCSHVMHACKS = scsh/proc2.o #JMG: and it's object files #JMG left out: scsh/re.o scsh/re1.o scsh/regexp/regexp.o scsh/regexp/regsub.o # # SCSHOBJS = \ scsh/dirstuff1.o \ scsh/fdports1.o \ scsh/flock.o scsh/flock1.o \ scsh/machine/stdio_dep.o \ scsh/machine/time_dep1.o \ scsh/machine/signals1.o \ scsh/machine/libansi.o \ scsh/network.o scsh/network1.o \ scsh/putenv.o \ scsh/rdelim.o \ scsh/rx/re-low.o scsh/rx/re1.o \ scsh/select.o scsh/select1.o \ scsh/sleep1.o \ scsh/syscalls.o scsh/syscalls1.o \ scsh/time.o scsh/time1.o \ scsh/tty.o scsh/tty1.o \ scsh/userinfo1.o \ scsh/sighandlers1.o scsh/sighandlers.o \ scsh/regexp/libregex.a UNIX_OBJS = c/unix/misc.o c/unix/io.o c/unix/fd-io.o c/unix/event.o #JMG: I omit process_args.o and SCSHVMHACKS no longer S48OBJS = c/scheme48vm.o c/scheme48heap.o c/extension.o c/external.o OBJS = scsh/process_args.o $(S48OBJS) $(CIGOBJS) $(SCSHOBJS) $(SCSHVMHACKS) FAKEHS = c/fake/dlfcn.h c/fake/sigact.h c/fake/strerror.h \ c/fake/sys-select.h # Sources: CONFIG_FILES = scheme/interfaces.scm scheme/low-packages.scm \ scheme/rts-packages.scm scheme/comp-packages.scm # Rules: # The following is the first rule and therefore the "make" command's # default target. enough: $(VM) $(IMAGE) go $(LIBCIG) scsh $(LIBSCSH) #JMG: no manpages at the moment $(MANPAGE) #JMG no notify at the moment... .notify # -------------------- # External code to include in the VM # After changing any of these you should delete `scheme48vm' and remake it. CIGGED = flock network select syscalls tty time sighandlers re_low rdelim #re CIGGEDOBJ = $(patsubst %,scsh/%.o, $(CIGGED)) CIGGEDINIT = $(patsubst %,s48_init_%, $(CIGGED)) EXTERNAL_OBJECTS = $(SOCKET_OBJECTS) $(LOOKUP_OBJECTS) EXTERNAL_FLAGS = $(SOCKET_FLAGS) EXTERNAL_INITIALIZERS = $(SOCKET_INITIALIZERS) $(LOOKUP_INITIALIZERS) s48_init_cig \ $(CIGGEDINIT) # Rules for any external code. # Socket rules c/unix/socket.o: c/scheme48.h c/fd-io.h c/event.h SOCKET_OBJECTS = c/unix/socket.o SOCKET_LD_FLAGS = SOCKET_INITIALIZERS = s48_init_socket # End of socket rules # Lookup rules (this is just for compatibility with old code) c/unix/dynamo.o: c/scheme48.h LOOKUP_OBJECTS = c/unix/dynamo.o LOOKUP_INITIALIZERS = s48_init_external_lookup # End of lookup rules # End of external rules # -------------------- # The developers are curious to know. Don't be concerned if this fails. .notify: build/minor-version-number touch .notify -echo Another 0.`cat $(srcdir)/build/minor-version-number` \ installation. \ | mail scheme-48-notifications@martigny.ai.mit.edu JMG: scsh stuff # This says how to process .scm files with cig to make .c stubs. .SUFFIXES: .scm .scm.c: # $(srcdir)/cig/cigscript $* $(srcdir)/$(VM) -o $(srcdir)/$(VM) -i $(CIG) < $< > $*.c # These .h files mediate between the code exported from foo1.c # and imported into foo.scm's stub foo.c. scsh/dirstuff1.o: scsh/dirstuff1.h scsh/rdelim.o: scsh/fdports1.h scsh/userinfo1.o: scsh/userinfo1.h scsh/fdports1.o scsh/fdports.o: scsh/fdports1.h scsh/flock1.o scsh/flock.o: scsh/flock1.h scsh/network1.o scsh/network.o: scsh/network1.h #JMG exists no longer in 0.5.2scsh/re1.o scsh/re.o: scsh/re1.h scsh/select1.o scsh/select.o: scsh/select1.h scsh/syscalls1.o scsh/syscalls.o: scsh/syscalls1.h scsh/time1.o scsh/time.o: scsh/time1.h scsh/tty1.o scsh/tty.o: scsh/tty1.h scsh/rx/re1.o scsh/rx/re-low.o: scsh/rx/re1.h scsh/syscalls.o: scsh/syscalls1.h scsh/dirstuff1.h scsh/fdports1.h \ scsh/select1.h scsh/userinfo1.h scsh/sighandlers1.o scsh/sighandlers.o: scsh/sighandlers1.h # Not really, but making regexp/libregex.a makes the regexp/regex.h file that # re-low.c actually does need. scsh/rx/re-low.o: scsh/regexp/libregex.a include $(srcdir)/scsh/machine/Makefile.inc # Berkeley make wants to see this instead: (or use GNU make on BSD. -bri) #.include "$(srcdir)/scsh/machine/Makefile.inc" $(VM): c/main.o $(OBJS) $(UNIX_OBJS) $(LIBOBJS) $(EXTERNAL_OBJECTS) rm -f /tmp/s48_external_$$$$.c && \ build/build-external-modules /tmp/s48_external_$$$$.c \ $(EXTERNAL_INITIALIZERS) && \ $(CC) $(LDFLAGS) $(CFLAGS) -o $@ c/main.o $(OBJS) $(UNIX_OBJS) \ /tmp/s48_external_$$$$.c \ $(LIBOBJS) $(LIBS) \ $(EXTERNAL_OBJECTS) $(EXTERNAL_LD_FLAGS) && \ rm -f /tmp/s48_external_$$$$.c #JMG: again cig and scsh-lib $(LIBCIG): c/main.o $(OBJS) # $(CC) -r -o $@ main.o $(OBJS) $(RM) $@ $(AR) $@ c/main.o $(OBJS) $(RANLIB) $@ $(LIBSCSH): c/smain.o $(OBJS) $(RM) $@ $(AR) $@ c/smain.o $(OBJS) $(RANLIB) $@ c/main.o: c/main.c c/scheme48vm.h c/scheme48heap.h $(CC) -c $(CFLAGS) -o $@ \ -DDEFAULT_IMAGE_NAME=\"$(LIB)/$(IMAGE)\" \ $(CPPFLAGS) $(DEFS) c/main.c c/scheme48vm.o: c/prescheme.h c/scheme48vm.h c/scheme48heap.h c/event.h \ c/io.h c/fd-io.h c/scheme48vm-prelude.h c/scheme48heap.o: c/prescheme.h c/scheme48vm.h c/scheme48heap.h c/event.h \ c/io.h c/fd-io.h c/extension.o: c/sysdep.h $(FAKEHS) c/scheme48.h c/scheme48vm.h c/external.o: c/sysdep.h $(FAKEHS) c/scheme48.h c/unix/event.o: c/sysdep.h $(FAKEHS) c/scheme48vm.h c/scheme48heap.h \ c/event.h c/fd-io.h c/unix/fd-io.o: c/sysdep.h $(FAKEHS) c/scheme48vm.h c/scheme48heap.h \ c/event.h c/fd-io.h c/unix/misc.o: c/sysdep.h $(FAKEHS) c/unix/io.o: c/io.h c/fake/libdl1.o: c/fake/dlfcn.h c/fake/libdl2.o: c/fake/dlfcn.h c/fake/strerror.o: c/fake/strerror.h # -------------------- # Make scheme48.image from initial.image and library .scm files. # # For bootstrap reasons, initial.image is *not* listed as a source, # even though it really is. $(IMAGE): $(VM) scheme/env/init-defpackage.scm scheme/more-interfaces.scm \ scheme/link-packages.scm scheme/more-packages.scm \ $(usual-files) build/initial.debug build/build-usual-image # sh $(srcdir)/build/build-usual-image "$(srcdir)" "$(LIB)" "$(IMAGE)" \ # "$(VM)" "$(INITIAL)" build/build-usual-image . "`pwd`/scheme" '$(IMAGE)' './$(VM)' \ '$(INITIAL)' ### Fake targets: all clean install man dist install: enough dirs inst-script inst-vm inst-misc inst-man inst-inc install-cig \ inst-image inst-vm: $(INSTALL_PROGRAM) $(VM) $(LIB) inst-image: rm -f '/tmp/$(IMAGE)' && \ build/build-usual-image . '$(LIB)' '/tmp/$(IMAGE)' './$(VM)' \ '$(INITIAL)' && \ $(INSTALL_DATA) /tmp/$(IMAGE) $(LIB) && \ rm /tmp/$(IMAGE) inst-man: if [ -d $(mandir) -a -w $(mandir) ]; then \ sed 's=LBIN=$(bindir)=g' doc/scheme48.man | \ sed 's=LLIB=$(LIB)=g' | \ sed 's=LS48=$(RUNNABLE)=g' >$(MANPAGE) && \ $(INSTALL_DATA) $(MANPAGE) $(mandir) && \ rm $(MANPAGE); \ else \ echo "$(mandir) not writable dir, not installing man page" \ >&2; \ fi inst-inc: $(INSTALL_DATA) c/scheme48.h $(incdir) install-cig: cig $(INSTALL_PROGRAM) $(srcdir)/$(CIG) $(LIB)/cig $(INSTALL_PROGRAM) $(srcdir)/$(CIG).image $(LIB)/cig $(INSTALL_DATA) $(srcdir)/$(LIBCIG) $(LIB)/cig $(INSTALL_DATA) $(srcdir)/cig/libcig.h $(LIB)/cig inst-misc: for stub in env big opt misc link; do \ for f in scheme/$$stub/*.scm; do \ $(INSTALL_DATA) $$f $(LIB)/$$stub || exit 1; \ done; \ done && \ for f in scheme/rts/*num.scm scheme/rts/jar-defrecord.scm; do \ $(INSTALL_DATA) $$f $(LIB)/rts || exit 1; \ done inst-script: script=$(bindir)/$(RUNNABLE) && \ echo '#!/bin/sh' >$$script && \ echo >>$$script && \ echo 'lib=$(LIB)' >>$$script && \ echo 'exec $$lib/$(VM) -o $$lib/$(VM) -i $$lib/$(IMAGE) "$$@"' \ >>$$script && \ chmod +x $$script # Script to run scheme48 in this directory. go: echo '#!/bin/sh' >$@ && \ echo >>$@ && \ echo "lib=`pwd`" >>$@ && \ echo 'exec $$lib/$(VM) -o $$lib/$(VM) -i $$lib/$(IMAGE) "$$@"' \ >>$@ && \ chmod +x $@ dirs: for dir in $(libdir) $(bindir) $(incdir); do \ [ -d $$dir -a -w $$dir ] || { \ echo "$$dir not a writable directory" >&2; \ exit 1; \ }; \ done { mkdir -p $(LIB) && [ -w $(LIB) ]; } || { \ echo "$(LIB) not a writable directory" >&2; \ exit 1; \ } for dir in rts env big opt misc link; do \ { mkdir -p $(LIB)/$$dir && [ -w $(LIB)/$$dir ]; } || { \ echo "$(LIB)/$$dir not a writable directory" >&2; \ exit 1; \ }; \ done configure: configure.in autoheader && autoconf #JMG: clean cig and the scsh too clean: clean-cig clean-scsh -rm -f $(VM) *.o c/unix/*.o c/*.o c/fake/*.o \ TAGS $(IMAGE) \ build/*.tmp $(MANPAGE) build/linker.image \ scheme/debug/*.image scheme/debug/*.debug \ scheme/vm/scheme48vm.c scheme/vm/scheme48heap.c \ go $(distname) clean-cig: -rm -f cig/*.o $(CIG) $(CIG).image $(LIBCIG) clean-scm2c: rm -f scsh/flock.c scsh/network.c scsh/rdelim.c \ scsh/re.c scsh/select.c scsh/syscalls.c scsh/tty.c scsh/time.c #JMG: moved config.cache to distclean distclean: clean rm -f Makefile config.log config.status c/sysdep.h config.cache check: $(VM) $(IMAGE) scheme/debug/check.scm ( \ echo ',batch'; \ echo ',translate =scheme48 scheme'; \ echo ',config ,load scheme/debug/test.scm'; \ echo ',exec ,load scheme/debug/check.scm'; \ echo ',exec (done)' \ ) | ./$(VM) -i $(IMAGE) # -------------------- # Rules from here on down are not essential for the basic installation # procedure, and are not expected to work when srcdir is not the # distribution directory. all: vm linker $(MAKE) image vm: $(VM) linker: $(LINKER_IMAGE) image: $(INITIAL) $(MAKE) $(IMAGE) tags: etags scsh/*.scm scsh/*.c \ scheme/vm/arch.scm scheme/rts/*.scm scheme/bcomp/*.scm \ scheme/*.scm scheme/env/*.scm scheme/big/*.scm scheme/link/*.scm \ scheme/opt/*.scm scheme/debug/*.scm scheme/misc/*.scm # -------------------- # Distribution... # DISTFILES should include all sources. DISTFILES = README COPYING INSTALL configure \ acconfig.h configure.in Makefile.in install-sh \ doc/*.ps doc/*.txt doc/html/*.html doc/scheme48.man \ doc/src/*.tex doc/src/*.sty \ emacs/README build/*-version-number build/*.exec \ build/*.lisp build/build-usual-image build/filenames.make \ build/filenames.scm build/initial.debug \ build/initial.image build/initial.scm \ build/build-external-modules \ c/*.[ch] c/*/*.[ch] c/scheme48.h.in \ emacs/*.el gdbinit \ scheme/*.scm scheme/*/*.scm \ ps-compiler \ c/sysdep.h.in distname = $(RUNNABLE)-0.`cat build/minor-version-number` dist: build/initial.image distname=$(distname) && \ distfile=$(distdir)/$$distname.tgz && \ if [ -d $(distdir) ] && \ [ -w $$distfile -o -w $(distdir) ]; then \ rm -f $$distname && \ ln -s . $$distname && \ files='' && \ for i in $(DISTFILES); do \ if [ "$$i" != "c/sysdep.h" ]; then \ files="$$files $$distname/$$i"; \ fi \ done && \ tar -cf - $$files | \ gzip --best >$$distfile && \ rm $$distname; \ else \ echo "Can't write $$distfile" >&2; \ exit 1; \ fi # Increment the minor version number inc: f=build/minor-version-number && \ expr `cat $$f` + 1 >$$f.tmp && \ mv $$f.tmp $$f && \ echo '(define version-info "0.'`cat $$f`'")' \ >scheme/env/version-info.scm # -------------------- # Generate build/filenames.make from *packages.scm # # This hack traces the module dependencies described in the # various configuration files and converts them into dependency lists # that "make" can use for its purposes. # # Since the distribution comes with a filenames.make, this rule # shouldn't be invoked for simple installations. But it will be used # if you change any of the *-packages.scm files. # # You can actually run the forms in filenames.scm in any Scheme # implementation that has syntax-rules and explicit-renaming low-level # macros (e.g., most versions of Scheme 48 and Pseudoscheme). # If there are errors running this script, and you need to debug, # don't use the initial.image, use something that has a reasonable # environment. # # If this fails and you don't feel like debugging or fixing the problem, # try "touch filenames.make" and hope for the best. PACKAGES=scheme/packages.scm scheme/rts-packages.scm scheme/alt-packages.scm \ scheme/comp-packages.scm scheme/initial-packages.scm \ scheme/link-packages.scm scheme/more-packages.scm \ build/filenames.scm build/filenames.make: $(PACKAGES) $(MAKE) $(VM) PACKAGES= ./$(VM) -i $(srcdir)/$(INITIAL) -a batch $(CIG) -chmod +x $(CIG) mv /tmp/cig $(srcdir)/cig/standalone.image $(RM) /tmp/cig $(CIG)2: (echo ",batch"; \ echo ",translate =scheme48/ $(srcdir)/scheme/"; \ echo ",config ,load $(srcdir)/cig/cig2.scm"; \ echo ",config ,load $(srcdir)/cig/libcig.scm"; \ echo ",load-package cig-standalone"; \ echo ",in cig-standalone"; \ echo ",translate =scheme48/ $(LIB)/"; \ echo '(dump-scsh-program cig-standalone-toplevel "/tmp/cig")') \ | ./$(VM) -o ./$(VM) -i ./scsh/scsh.image $(srcdir)/cig/image2script $(LIB)/$(VM) $(CIG)2 -chmod +x $(CIG)2 $(RM) /tmp/cig $(CIG).image: $(IMAGE) $(VM) $(srcdir)/cig/cig.scm $(srcdir)/cig/libcig.scm (echo ",batch"; \ echo ",translate =scheme48/ $(srcdir)/scheme/"; \ echo ",config ,load $(srcdir)/cig/cig.scm"; \ echo ",config ,load $(srcdir)/cig/libcig.scm"; \ echo ",load-package cig-aux"; \ echo ",open define-foreign-syntax"; \ echo ",translate =scheme48/ $(LIB)/"; \ echo ",dump /tmp/cig \"(CIG Preloaded -bri)\"") \ | ./$(VM) -o ./$(VM) -i ./$(IMAGE) $(srcdir)/cig/image2script $(LIB)/$(VM) \ -o $(LIB)/$(VM) \ $(CIG).image -chmod +x $(CIG).image $(RM) /tmp/cig #-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # SCSH Specifics #-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- scsh: cig scsh/scsh scsh/scsh.image SCHEME =scsh/awk.scm \ scsh/char-set.scm \ scsh/defrec.scm \ scsh/endian.scm \ scsh/enumconst.scm \ scsh/event.scm \ scsh/fdports.scm \ scsh/fileinfo.scm \ scsh/filemtch.scm \ scsh/filesys.scm \ scsh/flock.scm \ scsh/fname.scm \ scsh/fr.scm \ scsh/glob.scm \ scsh/here.scm \ scsh/machine/bufpol.scm \ scsh/machine/errno.scm \ scsh/machine/fdflags.scm \ scsh/machine/netconst.scm \ scsh/machine/packages.scm \ scsh/machine/signals.scm \ scsh/machine/time_dep.scm \ scsh/machine/tty-consts.scm \ scsh/machine/waitcodes.scm \ scsh/meta-arg.scm \ scsh/network.scm \ scsh/newports.scm \ scsh/procobj.scm \ scsh/pty.scm \ scsh/rdelim.scm \ scsh/rw.scm \ scsh/scsh-condition.scm \ scsh/scsh-interfaces.scm \ scsh/scsh-package.scm \ scsh/scsh-read.scm \ scsh/scsh-version.scm \ scsh/scsh.scm \ scsh/select.scm \ scsh/startup.scm \ scsh/stringcoll.scm \ scsh/syntax-helpers.scm \ scsh/syntax.scm \ scsh/syscalls.scm \ scsh/time.scm \ scsh/top.scm \ scsh/tty.scm \ scsh/utilities.scm # scsh/dbm.scm db.scm ndbm.scm # static.scm static-heap.scm static1.scm # jcontrol # Bogus, but it makes the scm->c->o two-ply dependency work. # Explicitly giving the .o/.c dependency also makes it go. ############################################################ cig/libcig.c: cig/libcig.scm scsh/flock.c: scsh/flock.scm scsh/jcontrol2.c: scsh/jcontrol2.scm scsh/network.c: scsh/network.scm scsh/rdelim.c: scsh/rdelim.scm scsh/select.c: scsh/select.scm scsh/syscalls.c: scsh/syscalls.scm scsh/tty.c: scsh/tty.scm scsh/time.c: scsh/time.scm scsh/scsh: scsh/scsh-tramp.c $(CC) -o $@ $(CPPFLAGS) $(CFLAGS) \ -DVM=\"$(LIB)/$(VM)\" \ -DIMAGE=\"$(LIB)/scsh.image\" \ scsh/scsh-tramp.c loads = $(srcdir)/scsh/let-opt.scm $(srcdir)/scsh/scsh-interfaces.scm \ $(srcdir)/scsh/machine/packages.scm \ $(srcdir)/scsh/rx/packages.scm \ $(srcdir)/scsh/rx/cond-package.scm \ $(srcdir)/scsh/scsh-package.scm \ $(srcdir)/scsh/lib/string-pack.scm \ $(srcdir)/scsh/lib/list-pack.scm \ $(srcdir)/scsh/lib/ccp-pack.scm #JMG : not anymore appropriate #echo ",open external-calls"; \ # echo "(lookup-all-externals)"; \ bs: build/build-scsh-image sh $(srcdir)/build/build-scsh-image "$(srcdir)" "$(LIB)" "$(IMAGE)" \ "$(VM)" cig/cig.image loads = $(srcdir)/scsh/let-opt.scm $(srcdir)/scsh/scsh-interfaces.scm \ $(srcdir)/scsh/machine/packages.scm \ $(srcdir)/scsh/rx/packages.scm \ $(srcdir)/scsh/rx/cond-package.scm \ $(srcdir)/scsh/scsh-package.scm \ $(srcdir)/scsh/lib/string-pack.scm \ $(srcdir)/scsh/lib/list-pack.scm \ $(srcdir)/scsh/lib/ccp-pack.scm scsh/scsh.image: $(VM) $(SCHEME) $(CIG).image (echo ",translate =scheme48/ $(srcdir)/scheme/"; \ echo ",batch on"; \ echo ",load-package floatnums"; \ echo ",config"; \ echo ",load $(loads)"; \ echo ",load-package scsh"; \ echo ",load-package events"; \ echo ",load-package scsh-here-string-hax"; \ echo ",translate =scheme48/ $(LIB)/"; \ echo ",load-package list-lib"; \ echo ",load-package string-lib"; \ echo ",load-package ccp-lib"; \ echo ",in scsh-level-0"; \ echo "(init-scsh-signal)";\ echo ",user"; \ echo ",open floatnums"; \ echo ",open scsh"; \ echo ",open list-lib string-lib ccp-lib"; \ echo ",batch off"; \ echo ",open scsh-top-package"; \ echo ",keep names maps files source tabulate"; \ echo ",dump scsh06.image"; \ echo "(dump-scsh \"scsh/scsh.image\")"; \ echo ",batch on") \ | ./$(VM) -o ./$(VM) -i $(CIG).image -h 10000000 # echo ",build (lambda (args) ((scsh-stand-alone-resumer (make-scsh-starter)) args)) bla.image"; \ #scsh/scsh.image: $(VM) $(SCHEME) $(CIG).image # (echo ",translate =scheme48/ $(srcdir)/"; \ # echo ",batch on"; \ # echo ",load-package floatnums"; \ # echo ",open externals"; \ # echo "(lookup-all-externals)"; \ # echo ",config"; \ # echo ",load $(srcdir)/scsh/let-opt.scm"; \ # echo ",load $(srcdir)/scsh/scsh-interfaces.scm"; \ # echo ",load $(srcdir)/scsh/machine/packages.scm"; \ # echo ",load $(srcdir)/scsh/scsh-package.scm"; \ # echo ",load-package scsh"; \ # echo ",load-package scsh-here-string-hax"; \ # echo ",translate =scheme48/ $(LIB)/"; \ # echo ",in scsh-level-0"; \ # echo "(%install-scsh-handlers)"; \ # echo "(autoreap-policy 'early)"; \ # echo ",user"; \ # echo ",open floatnums"; \ # echo ",open scsh"; \ # echo ",dump scsh/scsh.image") \ # | ./$(VM) -o ./$(VM) -i $(CIG).image # Removed these lines from scsh/scsh.image rule so you don't lose so # badly when you are debugging in scsh. -Olin 6/95 # echo ",flush"; # echo ",flush maps source names files table"; #scsh/scsh.runnable: scsh/scsh.image # cig/image2script $(LIB)/$(VM) -o $(LIB)/$(VM) -h 1800000 \ # < scsh/scsh.image > $@ # -chmod +x $@ scsh/regexp/libregex.a: cd ./scsh/regexp; $(MAKE) lib scsh/scsh.vm: $(LIBSCSH) $(VM) scsh/scsh.image ./$(VM) -o ./$(VM) -h 8000000 -i scsh/scsh.image \ -lm ./vm/ps-interface.scm \ -lm ./vm/interfaces.scm \ -lm ./vm/package-defs.scm \ -lm ./vm/s48-package-defs.scm \ -dm -m static-heaps -e static-heap-linker \ -s scsh/static.scm \ -i scsh/scsh.image -o $@ install-scsh: scsh $(RM) $(bindir)/$(RUNNABLE) $(INSTALL_PROGRAM) $(srcdir)/scsh/scsh $(bindir)/$(RUNNABLE) $(INSTALL_PROGRAM) $(srcdir)/scsh/scsh.image $(LIB)/scsh.image $(INSTALL_PROGRAM) $(srcdir)/$(LIBSCSH) $(libdir)/$(LIBSCSH) $(RANLIB) $(libdir)/$(LIBSCSH) for f in $(srcdir)/scsh/*.scm; \ do $(INSTALL_DATA) $$f $(LIB)/scsh/; done clean-scsh: $(RM) scsh/*.o scsh/regexp/*.o scsh/rx/*.o scsh/machine/*.o $(RM) scsh/*.image $(RM) $(LIBSCSH) scsh/scsh$(EXEEXT) scsh/scsh.vm -cd scsh/regexp; $(MAKE) clean