# Scsh Makefile
# Documentation in files INSTALL and doc/install.txt

SHELL = /bin/sh

### Filled in by `configure' ###
srcdir = @srcdir@
VPATH = @srcdir@
CC = @CC@
DEFS = @DEFS@
LIBS = @LIBS@
CFLAGS = @CFLAGS@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

LDFLAGS = -g @LDFLAGS@
LIBOBJS = @LIBOBJS@

RM	= rm -f

AR	= @AR@
RANLIB	= @RANLIB@

prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
incdir = @includedir@
manext = 1
mandir = @mandir@/man$(manext)
### End of `configure' section###

htmldir = $(libdir)/scsh/doc/scsh-manual/html

# HP 9000 series, if you don't have gcc
#   CC = cc
#   CFLAGS = -Aa -O +Obb1800
#   DEFS = -D_HPUX_SOURCE -Dhpux

# Ultrix
#   LDFLAGS = -N

.c.o:
	$(CC) -g -c $(CPPFLAGS) $(DEFS) -I$(srcdir)/c -I$(srcdir)/cig $(CFLAGS) -o $@ $<

# BUILD_RUNNABLE has to be Scheme 48 0.53. This is used for builds directly 
# out of the CVS repository.
# We cannot use Scsh here since -i is not understood.
BUILD_RUNNABLE = /afs/wsi/i386_fbsd32/bin/scheme48
RUNNABLE = scsh
MANPAGE = $(RUNNABLE).$(manext)
LIB = $(libdir)/$(RUNNABLE)

distdir = /tmp

# If make barfs on this include line, just comment it out.  It's only
# really needed if you want to build the linker or rebuild initial.image.
include $(srcdir)/build/filenames.make
#
#NetBSD make wants to see this instead:
#.include "$(srcdir)/build/filenames.make"


# Static linker:
#
# You only need the linker if you're going to make changes to the
# things that go into the initial.image, which in general means the
# files in rts/.  If you decide you need to use the linker, then you
# gots your choice; it can run in just about any version of Scheme 48
# or Pseudoscheme.  (It has also been made to run in Scheme->C.)  It
# doesn't matter a whole lot which Scheme you use as long as it's not
# broken or unavailable.  The two best choices are:
# 1. As below: build the linker on the scheme48vm and scheme48.image
#    that are in the current directory.
# 2. LINKER_VM = $(RUNNABLE) $(BIG_HEAP)
#    LINKER_RUNNABLE = $(RUNNABLE)
#    These settings requires you to already have a $(RUNNABLE)
#    command.  This is desirable if you are making changes to the
#    system that might break scshvm and/or scsh/scsh.image.  But it
#    requires you to have squirreled away a previous working version
#    of scsh.

BIG_HEAP = -h 5000000
# 1. is broken if you build from CVS
# LINKER_VM = ./$(VM) $(BIG_HEAP)
# LINKER_RUNNABLE = $(LINKER_VM) -i $(IMAGE)

# therefore according to 2. but we cannot use scsh since -i is not understood
LINKER_VM = $(BUILD_RUNNABLE) $(BIG_HEAP)
LINKER_RUNNABLE = $(BUILD_RUNNABLE)

LINKER_IMAGE = build/linker.image
LINKER = $(LINKER_VM) -i $(LINKER_IMAGE)
START_LINKER = echo ',batch' && echo ',bench on'

# --------------------
# You shouldn't have to change anything below this point, except for possibly
# the external code rules.

# Targets:

IMAGE = scheme48.image
INITIAL = build/initial.image
VM = scshvm
LIBCIG = cig/lib$(VM).a
CIG = cig/cig
CIGOBJS = cig/libcig.o cig/libcig1.o

#scsh-lib
LIBSCSHVM = scsh/lib$(VM).a
LIBSCSH = scsh/libscsh.a
SCSHVMHACKS = scsh/proc2.o

# 	
# 	
SCSHOBJS = \
	scsh/cstuff.o \
	scsh/dirstuff1.o \
	scsh/fdports1.o \
	scsh/flock1.o \
	scsh/machine/time_dep1.o \
	scsh/signals1.o \
	scsh/machine/libansi.o \
	scsh/network1.o \
	scsh/putenv.o \
	scsh/rx/regexp1.o \
	scsh/sleep1.o \
	scsh/syscalls1.o \
	scsh/syslog1.o \
	scsh/time1.o \
	scsh/tty1.o \
	scsh/userinfo1.o \
	scsh/sighandlers1.o

SCSH_INITIALIZERS = s48_init_syslog s48_init_posix_regexp \
	s48_init_userinfo s48_init_sighandlers \
	s48_init_syscalls s48_init_network s48_init_flock \
	s48_init_dirstuff s48_init_time s48_init_tty \
	s48_init_cig

UNIX_OBJS = c/unix/misc.o c/unix/io.o c/unix/fd-io.o c/unix/event.o


S48OBJS = c/scheme48vm.o c/scheme48heap.o c/extension.o c/external.o 
OBJS = scsh/process_args.o c/init.o $(S48OBJS) $(CIGOBJS) $(SCSHOBJS) \
	$(SCSHVMHACKS)

FAKEHS	= c/fake/dlfcn.h c/fake/sigact.h c/fake/strerror.h \
		c/fake/sys-select.h

# Sources:

CONFIG_FILES = scheme/interfaces.scm scheme/low-packages.scm \
	       scheme/rts-packages.scm scheme/comp-packages.scm

# Rules:

# The following is the first rule and therefore the "make" command's
# default target.
enough: $(VM) $(IMAGE) go $(LIBCIG) scsh $(LIBSCSH) $(LIBSCSHVM) 

# --------------------
# External code to include in the VM
# After changing any of these you should delete `scheme48vm' and remake it.

EXTERNAL_OBJECTS = $(SOCKET_OBJECTS) $(LOOKUP_OBJECTS)
EXTERNAL_FLAGS = $(SOCKET_FLAGS)
EXTERNAL_INITIALIZERS = $(ADDITIONAL_INITIALIZER) $(SOCKET_INITIALIZERS) 	\
	$(LOOKUP_INITIALIZERS) 							\
	$(SCSH_INITIALIZERS)							\
	s48_init_cig


# Rules for any external code.

# Socket rules

c/unix/socket.o: c/scheme48.h c/fd-io.h c/event.h

SOCKET_OBJECTS = c/unix/socket.o
SOCKET_LD_FLAGS =
SOCKET_INITIALIZERS = 	s48_init_socket

# End of socket rules

# Lookup rules (this is just for compatibility with old code)

c/unix/dynamo.o: c/scheme48.h

LOOKUP_OBJECTS = c/unix/dynamo.o
LOOKUP_INITIALIZERS = 	s48_init_external_lookup

# End of lookup rules

# Initializer for s48_add_external_init

ADDITIONAL_INITIALIZER = s48_init_additional_inits

# End of external rules
# --------------------

# The developers are curious to know.  Don't be concerned if this fails.
.notify: build/minor-version-number
	touch .notify
	-echo SCSH 0.`cat $(srcdir)/scsh/minor-version-number` \
	   Scheme48 0.`cat $(srcdir)/minor-version-number` infestation. \
	   | mail scheme-48-notifications@zurich.ai.mit.edu 
	-echo Another scsh 0.`cat $(srcdir)/scsh/minor-version-number` \
	infestation. | mail scsh-notifications@zurich.ai.mit.edu 


# This says how to process .scm files with cig to make .c stubs.
#.SUFFIXES: .scm
#.scm.c:
#	$(srcdir)/$(VM) -o $(srcdir)/$(VM) -i $(CIG) < $< > $*.c

# These .h files mediate between the code exported from foo1.c
# and imported into foo.scm's stub foo.c.

scsh/dirstuff1.o: scsh/dirstuff1.h
scsh/userinfo1.o: scsh/userinfo1.h
scsh/network1o:	  scsh/network1.h
scsh/flock1.o:	   scsh/flock1.h

scsh/fdports1.o	  scsh/fdports.o:  scsh/fdports1.h
#scsh/select1.o	  scsh/select.o:   scsh/select1.h

scsh/rx/regexp1.o:    c/scheme48.h

scsh/sighandlers1.o: scsh/sighandlers1.h

scsh/syslog1.o:	c/scheme48.h

include $(srcdir)/scsh/machine/Makefile.inc
# Berkeley make wants to see this instead: (or use GNU make on BSD. -bri)
#.include "$(srcdir)/scsh/machine/Makefile.inc"

$(VM): c/main.o $(OBJS) $(UNIX_OBJS) $(LIBOBJS) $(EXTERNAL_OBJECTS)
	rm -f /tmp/s48_external_$$$$.c &&					\
	build/build-external-modules /tmp/s48_external_$$$$.c			\
		$(EXTERNAL_INITIALIZERS) &&					\
	$(CC) $(LDFLAGS) $(CFLAGS) -o $@ c/main.o $(OBJS) $(UNIX_OBJS)		\
		/tmp/s48_external_$$$$.c					\
		$(EXTERNAL_OBJECTS) $(EXTERNAL_LD_FLAGS)			\
		$(LIBOBJS) $(LIBS) &&						\
	rm -f /tmp/s48_external_$$$$.c




#JMG: again cig and scsh-lib
$(LIBCIG): c/main.o $(OBJS)
#	$(CC) -r -o $@ main.o $(OBJS)
	$(RM) $@
	$(AR) $@ c/main.o  $(OBJS)
	$(RANLIB) $@

$(LIBSCSHVM): c/smain.o $(OBJS)
	$(RM) $@
	$(AR) $@ c/smain.o $(OBJS)
	$(RANLIB) $@

$(LIBSCSH): $(OBJS) $(UNIX_OBJS) $(LIBOBJS) $(EXTERNAL_OBJECTS)
	$(RM) $@								\
	rm -f /tmp/s48_external_$$$$.c &&					\
	build/build-external-modules /tmp/s48_external_$$$$.c			\
		$(EXTERNAL_INITIALIZERS) &&					\
	$(CC) -c $(CFLAGS) -o  /tmp/s48_external_$$$$.o				\
			/tmp/s48_external_$$$$.c &&				\
	$(AR) $@ $(OBJS) $(OBJS) $(UNIX_OBJS) $(LIBOBJS) $(EXTERNAL_OBJECTS)	\
		/tmp/s48_external_$$$$.o &&					\
	$(RANLIB) $@ &&								\
	rm -f /tmp/s48_external_$$$$.c /tmp/s48_external_$$$$.o	

c/main.o: c/main.c
	$(CC) -c $(CFLAGS) -o $@ \
		-DDEFAULT_IMAGE_NAME=\"$(LIB)/$(IMAGE)\" \
		$(CPPFLAGS) $(DEFS) c/main.c

c/init.o: c/init.c c/scheme48vm.h c/scheme48heap.h
	$(CC) -c $(CFLAGS) -o $@ \
		-DDEFAULT_IMAGE_NAME=\"$(LIB)/$(IMAGE)\" \
		$(CPPFLAGS) $(DEFS) c/init.c

c/scheme48vm.o: c/prescheme.h c/scheme48vm.h c/scheme48heap.h c/event.h \
			c/io.h c/fd-io.h c/scheme48vm-prelude.h
c/scheme48heap.o: c/prescheme.h c/scheme48vm.h c/scheme48heap.h c/event.h \
			c/io.h c/fd-io.h
c/extension.o: c/sysdep.h $(FAKEHS) c/scheme48.h c/scheme48vm.h
c/external.o: c/sysdep.h $(FAKEHS) c/scheme48.h
c/unix/event.o: c/sysdep.h $(FAKEHS) c/scheme48vm.h c/scheme48heap.h \
			c/event.h c/fd-io.h
c/unix/fd-io.o: c/sysdep.h $(FAKEHS) c/scheme48vm.h c/scheme48heap.h \
			c/event.h c/fd-io.h
c/unix/misc.o: c/sysdep.h $(FAKEHS)
c/unix/io.o: c/io.h
c/fake/libdl1.o: c/fake/dlfcn.h
c/fake/libdl2.o: c/fake/dlfcn.h
c/fake/strerror.o: c/fake/strerror.h

# --------------------
# Make scheme48.image from initial.image and library .scm files.
#
# For bootstrap reasons, initial.image is *not* listed as a source,
# even though it really is.

$(IMAGE): $(VM) scheme/env/init-defpackage.scm scheme/more-interfaces.scm \
		scheme/link-packages.scm scheme/more-packages.scm \
		$(usual-files) build/initial.debug build/build-usual-image
	build/build-usual-image . "`pwd`/scheme" '$(IMAGE)' './$(VM)' \
		'$(INITIAL)'

### Fake targets:  all clean install man dist

install: enough dirs inst-script inst-vm inst-misc inst-man inst-inc 	\
	 inst-doc install-scsh

inst-vm: $(VM)
	$(INSTALL_PROGRAM) $(VM) $(LIB)

inst-man:
	if [ -d $(mandir) -a -w $(mandir) ]; then			   \
		sed 's=LBIN=$(bindir)=g' doc/scsh.man |		   \
			sed 's=LLIB=$(LIB)=g' |				   \
			sed 's=LSCSH=$(RUNNABLE)=g' >$(MANPAGE) &&	   \
		$(INSTALL_DATA) $(MANPAGE) $(mandir) &&			   \
		$(RM) $(MANPAGE);					   \
	else								   \
		echo "$(mandir) not writable dir, not installing man page" \
			>&2;						   \
	fi

inst-inc:
	$(INSTALL_DATA) $(srcdir)/c/scheme48.h $(incdir)	
	$(INSTALL_DATA) $(srcdir)/c/write-barrier.h $(incdir)

install-cig: cig
	$(INSTALL_PROGRAM) $(srcdir)/$(CIG) $(LIB)/cig
	$(INSTALL_PROGRAM) $(srcdir)/$(CIG).image $(LIB)/cig
	$(INSTALL_DATA) $(srcdir)/$(LIBCIG) $(LIB)/cig
	$(INSTALL_DATA) $(srcdir)/cig/libcig.h $(LIB)/cig

inst-misc:
	for stub in env big opt misc link; do				\
		for f in scheme/$$stub/*.scm; do			\
			$(INSTALL_DATA) $$f $(LIB)/$$stub || exit 1;	\
		done;							\
	done &&								\
	for f in scheme/rts/*num.scm scheme/rts/jar-defrecord.scm; do	\
		$(INSTALL_DATA) $$f $(LIB)/rts || exit 1;		\
	done 

inst-doc:
	for f in $(srcdir)/doc/*.txt $(srcdir)/doc/*.ps; do \
		$(INSTALL_DATA) $$f $(LIB)/doc/; 				\
	done &&									\
	for f in $(srcdir)/doc/src/*.tex 					\
		$(srcdir)/doc/src/*.dvi						\
		$(srcdir)/doc/src/*.ps;						\
		do $(INSTALL_DATA) $$f $(LIB)/doc/s48-manual/;			\
	done &&									\
	for f in $(srcdir)/doc/src/manual/*.html;				\
		do $(INSTALL_DATA) $$f $(LIB)/doc/s48-manual/html/;		\
	done &&									\
	for f in $(srcdir)/doc/scsh-manual/*.tex 				\
		$(srcdir)/doc/scsh-manual/*.dvi					\
		$(srcdir)/doc/scsh-manual/*.ps;					\
		do $(INSTALL_DATA) $$f $(LIB)/doc/scsh-manual/;			\
	done &&									\
	for f in $(srcdir)/doc/scsh-manual/html/*.html 				\
		$(srcdir)/doc/scsh-manual/html/*.gif 				\
		$(srcdir)/doc/scsh-manual/html/*.css;				\
		do $(INSTALL_DATA) $$f $(htmldir)/;				\
	done

inst-script:
	script=$(bindir)/$(RUNNABLE) &&					\
	echo '#!/bin/sh'	>$$script &&				\
	echo			>>$$script &&				\
	echo 'lib=$(LIB)'	>>$$script &&				\
	echo 'exec $$lib/$(VM) -o $$lib/$(VM) -i $$lib/$(IMAGE) "$$@"'	\
				>>$$script &&				\
	chmod +x $$script

# Script to run scsh in this directory.
go:
	echo '#!/bin/sh'	>$@ &&					\
	echo			>>$@ &&					\
	echo "lib=`pwd`"	>>$@ &&					\
	echo 'exec $$lib/$(VM) -o $$lib/$(VM) -i $$lib/scsh/scsh.image "$$@"'	\
				>>$@ &&					\
	chmod +x $@

dirs:
	for dir in $(libdir) $(bindir) $(incdir) $(LIB) $(mandir) $(htmldir); do\
		{ mkdir -p $$dir && [ -w $$dir ]; } || {		\
			echo "$$dir not a writable directory" >&2;	\
			exit 1;						\
	}								\
	done &&								\
	for dir in								\
		rts env big opt misc link scsh doc/scsh-manual 			\
		doc/s48-manual/html cig; do					\
		{ mkdir -p $(LIB)/$$dir && [ -w $(LIB)/$$dir ]; } || {		\
			echo "$(LIB)/$$dir not a writable directory" >&2; 	\
		exit 1;						  		\
		};							  	\
	done

configure: configure.in
	autoheader && autoconf

clean: clean-cig clean-scsh
	-rm -f $(VM) *.o c/unix/*.o c/*.o c/fake/*.o			\
		$(IMAGE)						\
		build/*.tmp $(MANPAGE) build/linker.image		\
		scheme/debug/*.image scheme/debug/*.debug	\
		scheme/vm/scheme48vm.c scheme/vm/scheme48heap.c		\
		go $(distname)

clean-cig:
	-rm -f cig/*.o $(CIG) $(CIG).image $(LIBCIG)

clean-scm2c:
	rm -f #scsh/select.c

distclean: clean
	rm -f Makefile config.log config.status c/sysdep.h config.cache \
		scsh/machine \
		scsh/endian.scm scsh/static.scm \
		exportlist.aix
	$(RM) a.exe $(VM).base $(VM).def $(VM).exp 
	-find . -name '*~' -o -name '#*'  -o -name core -exec rm {} \;

check:	$(VM) $(IMAGE) scheme/debug/check.scm
	(								\
		echo ',batch';						\
		echo ',translate =scheme48 scheme';			\
		echo ',config ,load scheme/debug/test.scm';		\
		echo ',exec ,load scheme/debug/check.scm';		\
		echo ',exec (done)'					\
	) | ./$(VM) -i $(IMAGE)

# --------------------
# Rules from here on down are not essential for the basic installation
# procedure, and are not expected to work when srcdir is not the
# distribution directory.

all: vm linker
	$(MAKE) image
vm: $(VM)
linker: $(LINKER_IMAGE)
image: $(INITIAL)
	$(MAKE) $(IMAGE)

tags:
	find . -name "*.scm" -o -name "*.c" -o -name "*.h" | etags -

# --------------------
# Distribution...

# DISTFILES should include all sources.
DISTFILES = README COPYING INSTALL RELEASE configure config.sub config.guess \
		acconfig.h configure.in Makefile.in install-sh		\
		doc/*.ps doc/*.txt					\
		doc/src/*.tex doc/src/*.sty doc/src/manual.dvi 		\
		doc/src/manual.ps					\
		emacs/README build/*-version-number build/*.exec	\
		build/*.lisp build/build-usual-image build/filenames.make \
		build/filenames.scm build/initial.debug			\
		build/initial.image build/initial.scm			\
		build/build-external-modules				\
		c/*.[ch] c/*/*.[ch] c/scheme48.h.in			\
		emacs/*.el gdbinit					\
		scheme/*.scm scheme/*/*.scm				\
		ps-compiler						\
		c/sysdep.h.in						\
		scsh/*.scm scsh/*/*.scm					\
		scsh/*.[ch] scsh/*/*.[ch]				\
		scsh/*.scm.in scsh/*/Makefile.inc			\
		cig/*.scm cig/*.[ch]					\
		doc/scsh.man						\
		doc/scsh-manual/*.tex doc/scsh-manual/man.ps 		\
		doc/scsh-manual/man.dvi	doc/scsh-manual/Makefile 	\
		doc/scsh-manual/THANKS doc/scsh-manual/html/*.html 	\
		doc/scsh-manual/html/*.gif doc/scsh-manual/html/*.css	\
		doc/src/manual/*.html


distname = $(RUNNABLE)-0.`cat build/minor-version-number`

dist: build/initial.image
	(cd doc/src && hyperlatex manual.tex) &&			\
	(cd doc/scsh-manual && makeindex man && make man.ps && make html) && \
	distname=$(distname) &&						\
	distfile=$(distdir)/$$distname.tgz &&				\
	if [ -d $(distdir) ] &&						\
	   [ -w $$distfile -o -w $(distdir) ]; then			\
		rm -f $$distname &&					\
		ln -s . $$distname &&					\
		files='' &&						\
		for i in $(DISTFILES); do				\
			if [ "$$i" != "c/sysdep.h" ]; then		\
				files="$$files $$distname/$$i";		\
			fi						\
		done &&							\
		tar -cf - $$files |					\
			gzip --best >$$distfile &&			\
		rm $$distname;						\
	else								\
		echo "Can't write $$distfile" >&2;			\
		exit 1;							\
	fi

# Increment the minor version number
inc:
	f=build/minor-version-number &&					\
	expr `cat $$f` + 1 >$$f.tmp &&					\
	mv $$f.tmp $$f &&						\
	echo '(define version-info "0.'`cat $$f`'")'			\
		>scheme/env/version-info.scm


# --------------------
# Generate build/filenames.make from *packages.scm
#
# This hack traces the module dependencies described in the
# various configuration files and converts them into dependency lists
# that "make" can use for its purposes.
#
# Since the distribution comes with a filenames.make, this rule
# shouldn't be invoked for simple installations.  But it will be used
# if you change any of the *-packages.scm files.
#
# You can actually run the forms in filenames.scm in any Scheme
# implementation that has syntax-rules and explicit-renaming low-level
# macros (e.g., most versions of Scheme 48 and Pseudoscheme).
# If there are errors running this script, and you need to debug,
# don't use the initial.image, use something that has a reasonable
# environment.
#
# If this fails and you don't feel like debugging or fixing the problem,
# try "touch filenames.make" and hope for the best.

PACKAGES=scheme/packages.scm scheme/rts-packages.scm scheme/alt-packages.scm \
	 scheme/comp-packages.scm scheme/initial-packages.scm \
	 scheme/link-packages.scm scheme/more-packages.scm \
	 build/filenames.scm

build/filenames.make: $(PACKAGES)
	$(BUILD_RUNNABLE) -a batch <build/filenames.scm

# --------------------
# Static linker
#
# The linker is capable of rebuilding an image from sources, even
# across an incompatible change in VM data representations.

build/linker.image: $(linker-files) scheme/alt/init-defpackage.scm
	(echo ',batch';						\
		echo ',bench on';				\
		echo ',open signals handle features';		\
		echo ',open bitwise ascii code-vectors record';	\
		echo ',load $(linker-files)';			\
		echo ',load scheme/alt/init-defpackage.scm';	\
		echo ',dump build/linker.image'			\
	) | $(LINKER_RUNNABLE)

# Or, to bootstrap from Lucid Common Lisp: (last tested with
# Pseudoscheme 2.9 and Scheme 48 version 0.19)

PSEUDODIR = ../pseudo

link/linker-in-lucid: build/lucid-script.lisp $(linker-files) \
	    scheme/alt/pseudoscheme-features.scm \
	    scheme/alt/pseudoscheme-record.scm
	(echo \(defvar pseudoscheme-directory \"$(PSEUDODIR)/\"\); \
	 cat build/lucid-script.lisp; \
	 echo \(dump-linker\) \(lcl:quit\)) \
	| lisp

# --------------------
# Initial image
#
# The initial.image is built by the static linker.  The image contains
# Scheme, the byte-code compiler, and a minimal command processor, but
# no debugging environment to speak of.

$(INITIAL): $(LINKER_IMAGE) $(CONFIG_FILES) build/initial.scm $(initial-files) \
	 scsh/here.scm # gross and Olin hates it -bri	
	($(START_LINKER);						\
		echo '(load-configuration "scheme/interfaces.scm")';	\
		echo '(load-configuration "scheme/packages.scm")';	\
		echo '(flatload initial-structures)';			\
		echo '(load "build/initial.scm")';			\
		echo '(link-initial-system)'				\
	) | $(LINKER)

# --------------------
# Various small images for debugging low-level changes

LOAD_DEBUG = \
	 $(START_LINKER); \
	 echo \(load-configuration \"scheme/interfaces.scm\"\); \
	 echo \(load-configuration \"scheme/packages.scm\"\); \
	 echo \(flatload debug-structures\)

scheme/debug/tiny.image: $(LINKER_IMAGE) scheme/debug/tiny-packages.scm \
		  scheme/debug/tiny.scm
	($(START_LINKER); \
	 echo \(load-configuration \"scheme/debug/tiny-packages.scm\"\); \
	 echo \(link-simple-system \'\(scheme/debug tiny\) \'start tiny-system\)) \
	| $(LINKER)

scheme/debug/low-test.image: $(LINKER_IMAGE) scheme/debug/low-test-packages.scm \
		  scheme/debug/low-test.scm
	($(START_LINKER); \
	 echo \(load-configuration \"scheme/debug/low-test-packages.scm\"\); \
	 echo \(link-simple-system \'\(scheme/debug low-test\) \'start low-test-system\)) \
	| $(LINKER)

scheme/debug/little.image: $(LINKER_IMAGE) $(CONFIG_FILES) scheme/debug-packages.scm
	($(LOAD_DEBUG); echo \(link-little-system\)) \
	| time $(LINKER)

scheme/debug/mini.image: $(LINKER_IMAGE) $(CONFIG_FILES)
	($(LOAD_DEBUG); echo \(link-mini-system\)) \
	| $(LINKER)

scheme/debug/medium.image: $(LINKER_IMAGE) $(CONFIG_FILES)
	($(LOAD_DEBUG); echo \(flatload compiler-structures\); \
	 echo \(link-medium-system\)) \
	| $(LINKER)

# The following have not been updated for the new directory organization

c/smain.o: c/main.c
	$(CC) -c $(CPPFLAGS) $(DEFS) $(CFLAGS) -DSTATIC_AREAS -o $@ $(srcdir)/c/main.c

mini: mini-heap.o c/smain.o
	$(CC) $(LDFLAGS) $(CFLAGS) -o $@ c/smain.o mini-heap.o $(OBJS) $(LIBS)

mini-heap.o: mini-heap.c
	$(CC) -c $(CPPFLAGS) $(DEFS) $(CFLAGS) -o $@ $(srcdir)/mini-heap.c

mini-heap.c: scheme/debug/mini1.image
	(echo ,exec ,load misc/load-static.scm; \
	 echo \(do-it 150000 \"$(srcdir)/scheme/debug/mini1.image\" \"$@\"\)) \
	| $(BUILD_RUNNABLE) -h 3000000 -a batch

scheme/debug/mini1.image: $(VM) scheme/debug/mini.image
	echo "(write-image \"scheme/debug/mini1.image\" \
			   (usual-resumer (lambda (args) \
					    (command-processor #f args))) \
			   \"foo\")" \
	| ./$(VM) -i scheme/debug/mini.image -a batch


# --------------------
# Generate scheme48.h from VM sources

c/scheme48.h: c/scheme48.h.in scheme/vm/arch.scm scheme/vm/data.scm \
	    scheme/link/generate-c-header.scm
	(echo ',bench';								\
		echo ',batch';							\
		echo ',load-package big-scheme';				\
		echo ',open big-scheme';					\
		echo ',load scheme/link/generate-c-header.scm';			\
		echo "(make-c-header-file \"$@\"				\
					  \"$(srcdir)/c/scheme48.h.in\"		\
					  \"$(srcdir)/scheme/vm/arch.scm\"	\
					  \"$(srcdir)/scheme/vm/data.scm\"   	\
					  \"$(srcdir)/scheme/rts/record.scm\")"	\
	) | $(BUILD_RUNNABLE)

# An old version of the above for legacy code.

c/old-scheme48.h: scheme/vm/arch.scm scheme/vm/data.scm \
	    scheme/link/generate-old-c-header.scm
	(echo ',bench';								\
		echo ',batch';							\
		echo ',load-package big-scheme';				\
		echo ',open big-scheme';					\
		echo ',load scheme/link/generate-old-c-header.scm';		\
		echo "(make-c-header-file \"$@\"				\
					  \"$(srcdir)/scheme/vm/arch.scm\"	\
					  \"$(srcdir)/scheme/vm/data.scm\")"   	\
	) | $(BUILD_RUNNABLE)

# Generate vm (scheme48vm.c and scheme48heap.c) from VM sources.
# Never called automatically.  Do not use unless you are sure you
# know what you are doing.
# Afterwards, you should probably make c/scheme48.h.
i-know-what-i-am-doing:
	cd ps-compiler &&						     \
	(echo ',batch';							     \
		echo ',config ,load ../scheme/prescheme/interface.scm';	     \
		echo ',config ,load ../scheme/prescheme/package-defs.scm';   \
		echo ',exec ,load load-ps-compiler.scm';		     \
		echo ',exec ,load compile-vm-no-gc.scm';		     \
		echo ',exec ,load compile-gc.scm';			     \
		echo ',exit'						     \
	) | $(BUILD_RUNNABLE) -h 5000000 &&					     \
		mv ../scheme/vm/scheme48vm.c ../scheme/vm/scheme48heap.c ../c

cig: $(CIG) $(CIG).image $(LIBCIG)


$(CIG): $(VM) $(IMAGE) $(srcdir)/cig/cig.scm $(srcdir)/cig/libcig.scm
	(echo ",batch"; \
	 echo ",translate =scheme48/ $(srcdir)/scheme/"; \
	 echo ",config ,load $(srcdir)/cig/cig.scm"; \
	 echo ",config ,load $(srcdir)/cig/libcig.scm"; \
	 echo ",load-package cig-standalone"; \
	 echo ",in cig-standalone"; \
	 echo ",translate =scheme48/ $(LIB)/"; \
	 echo ",build cig-standalone-toplevel /tmp/cig") \
	| ./$(VM) -i ./$(IMAGE)
	$(srcdir)/cig/image2script $(LIB)/$(VM) </tmp/cig > $(CIG)
	-chmod +x $(CIG)
	mv /tmp/cig $(srcdir)/cig/cig_bootstrap	
	$(RM) /tmp/cig

$(CIG).image: $(IMAGE) $(VM) $(srcdir)/cig/cig.scm $(srcdir)/cig/libcig.scm
	(echo ",batch"; \
	 echo ",translate =scheme48/ $(srcdir)/scheme/"; \
	 echo ",config ,load $(srcdir)/cig/cig.scm"; \
	 echo ",config ,load $(srcdir)/cig/libcig.scm"; \
	 echo ",load-package cig-aux"; \
	 echo ",open define-foreign-syntax"; \
	 echo ",translate =scheme48/ $(LIB)/"; \
	 echo ",dump /tmp/cig \"(CIG Preloaded -bri)\"") \
	| ./$(VM) -o ./$(VM) -i ./$(IMAGE)
	$(srcdir)/cig/image2script $(LIB)/$(VM) \
			-o $(LIB)/$(VM) \
			</tmp/cig > $(CIG).image
	-chmod +x $(CIG).image
	$(RM) /tmp/cig

#-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# SCSH Specifics
#-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
scsh: scsh/scsh scsh/scsh.image

SCHEME =scsh/awk.scm \
	scsh/char-set.scm \
	scsh/defrec.scm \
	scsh/endian.scm \
	scsh/enumconst.scm \
	scsh/event.scm \
	scsh/low-interrupt.scm \
	scsh/fdports.scm \
	scsh/fileinfo.scm \
	scsh/filemtch.scm \
	scsh/filesys.scm \
	scsh/flock.scm \
	scsh/fname.scm \
	scsh/fr.scm \
	scsh/glob.scm \
	scsh/dot-locking.scm \
	scsh/here.scm \
	scsh/machine/bufpol.scm \
	scsh/machine/errno.scm \
	scsh/machine/fdflags.scm \
	scsh/machine/netconst.scm \
	scsh/machine/packages.scm \
	scsh/machine/signals.scm \
	scsh/machine/time_dep.scm \
	scsh/machine/tty-consts.scm \
	scsh/machine/waitcodes.scm \
	scsh/meta-arg.scm \
	scsh/network.scm \
	scsh/newports.scm \
	scsh/procobj.scm \
	scsh/pty.scm \
	scsh/rdelim.scm \
	scsh/rw.scm \
	scsh/rx/packages.scm \
	scsh/rx/cond-package.scm \
	scsh/scsh-condition.scm \
	scsh/scsh-interfaces.scm \
	scsh/scsh-package.scm \
	scsh/scsh-read.scm \
	scsh/scsh-version.scm \
	scsh/scsh.scm \
	scsh/sighandlers.scm \
	scsh/startup.scm \
	scsh/stringcoll.scm \
	scsh/syntax-helpers.scm \
	scsh/syntax.scm \
	scsh/syscalls.scm \
	scsh/time.scm \
	scsh/top.scm \
	scsh/tty.scm \
	scsh/utilities.scm \
	scsh/weaktables.scm \
	scsh/rx/cond-package.scm \
	scsh/rx/packages.scm \
	scsh/rx/re-match-syntax.scm \
	scsh/rx/rx-lib.scm \
	scsh/rx/loadem.scm \
	scsh/rx/parse.scm \
	scsh/rx/re-subst.scm \
	scsh/rx/simp.scm \
	scsh/rx/modules.scm \
	scsh/rx/posixstr.scm \
	scsh/rx/re-syntax.scm \
	scsh/rx/spencer.scm \
	scsh/rx/oldfuns.scm \
	scsh/rx/re-fold.scm \
	scsh/rx/re.scm \
	scsh/rx/test.scm \
	scsh/rx/re-high.scm \
	scsh/rx/regexp.scm \
	scsh/rx/re-low.scm \
	scsh/rx/regress.scm
#    	scsh/dbm.scm db.scm ndbm.scm
#	static.scm static-heap.scm static1.scm
#	jcontrol

# Bogus, but it makes the scm->c->o two-ply dependency work.
# Explicitly giving the .o/.c dependency also makes it go.
############################################################
cig/libcig.c:		cig/libcig.scm
#scsh/select.c:	    	scsh/select.scm

scsh/scsh: scsh/scsh-tramp.c
	$(CC) -o $@ $(CPPFLAGS) $(CFLAGS) \
	-DVM=\"$(LIB)/$(VM)\" \
	-DIMAGE=\"$(LIB)/scsh.image\" \
	scsh/scsh-tramp.c

bs:	 build/build-scsh-image
	sh $(srcdir)/build/build-scsh-image "$(srcdir)" "$(LIB)" "$(IMAGE)" \
	   "$(VM)" cig/cig.image 

loads = $(srcdir)/scsh/let-opt.scm $(srcdir)/scsh/scsh-interfaces.scm \
         $(srcdir)/scsh/machine/packages.scm \
	 $(srcdir)/scsh/rx/packages.scm \
	 $(srcdir)/scsh/rx/cond-package.scm \
	 $(srcdir)/scsh/scsh-package.scm \
	 $(srcdir)/scsh/lib/cset-package.scm \
	 $(srcdir)/scsh/lib/string-package.scm \
	 $(srcdir)/scsh/lib/list-pack.scm \
	 $(srcdir)/scsh/lib/ccp-pack.scm \
	 $(srcdir)/scsh/lib/char-package.scm \
         $(srcdir)/scsh/lib/cset-obsolete.scm


scsh/scsh.image: $(VM) $(SCHEME) $(IMAGE)
	(echo ",translate =scheme48/ `pwd`/scheme/"; \
	 echo ",batch on"; \
	 echo ",load-package floatnums"; \
	 echo ",config"; \
	 echo ",load $(loads)"; \
	 echo ",load-package scsh"; \
	 echo ",load-package scsh-here-string-hax"; \
	 echo ",load-package list-lib"; \
	 echo ",load-package string-lib"; \
	 echo ",load-package ccp-lib"; \
	 echo ",in scsh-level-0"; \
	 echo ",user"; \
	 echo ",open floatnums"; \
	 echo ",open scsh"; \
	 echo ",open list-lib string-lib ccp-lib"; \
	 echo ",batch off"; \
	 echo ",open scsh-top-package"; \
	 echo ",keep names maps files source tabulate"; \
	 echo "(dump-scsh \"scsh/scsh.image\")"; \
	 echo ",batch on") \
	| ./$(VM) -o ./$(VM) -i $(IMAGE) -h 10000000

install-scsh: scsh install-scsh-image
	$(RM) $(bindir)/$(RUNNABLE)
	$(INSTALL_PROGRAM) $(srcdir)/scsh/scsh $(bindir)/$(RUNNABLE)
	$(INSTALL_PROGRAM) $(srcdir)/$(LIBSCSHVM) $(libdir)/$(LIBSCSHVM)
	$(INSTALL_PROGRAM) $(srcdir)/$(LIBSCSH) $(libdir)/$(LIBSCSH)
	$(RANLIB) $(libdir)/$(LIBSCSH)
	for f in $(srcdir)/scsh/*.scm $(srcdir)/scsh/*/*.scm; \
	    do $(INSTALL_DATA) $$f $(LIB)/scsh/; done

install-scsh-image: $(VM) scsh/scsh.image
	(	echo ',translate =scheme48 $(LIB)';			\
		echo '(dump-scsh "$(LIB)/scsh.image")';			\
		echo ',exit';						\
	) | ./$(VM) -i scsh/scsh.image	

clean-scsh:
	$(RM) scsh/*.o scsh/rx/*.o scsh/machine/*.o 
	$(RM) scsh/*.image 
	$(RM) $(LIBSCSHVM) $(LIBSCSH) scsh/scsh$(EXEEXT)