scsh-0.5/scsh/scsh-interfaces.scm

;;; The module interfaces for scsh.
;;; Copyright (c) 1994 by Olin Shivers and David Albertz.
;;; Copyright (c) 1994 by Brian D. Carlstrom

(define-interface posix-fdflags-interface
  (export open/read
	  open/write
	  open/read+write
	  open/nonblocking
	  open/append
	  open/no-control-tty
	  open/create
	  open/truncate
	  open/exclusive
	  open/access-mask

	  fcntl/dup-fdes
	  fcntl/get-fdes-flags
	  fcntl/set-fdes-flags
	  fcntl/get-status-flags
	  fcntl/set-status-flags
	  fcntl/get-record-lock
	  fcntl/set-record-lock
	  fcntl/set-record-lock-noblock

	  fdflags/close-on-exec

	  lock/read
	  lock/write
	  lock/release))

(define-interface posix-errno-interface
  (export errno/2big
	  errno/acces
	  errno/again
	  errno/badf
	  errno/busy
	  errno/child
	  errno/deadlk
	  errno/dom
	  errno/exist
	  errno/fault
	  errno/fbig
	  errno/intr
	  errno/inval
	  errno/io
	  errno/isdir
	  errno/mfile
	  errno/mlink
	  errno/nametoolong
	  errno/nfile
	  errno/nodev
	  errno/noent
	  errno/noexec
	  errno/nolck
	  errno/nomem
	  errno/nospc
	  errno/nosys
	  errno/notdir
	  errno/notempty
	  errno/notty
	  errno/nxio
	  errno/perm
	  errno/pipe
	  errno/range
	  errno/rofs
	  errno/spipe
	  errno/srch
	  errno/xdev))


(define-interface posix-signals-interface
  (export signal/abrt
	  signal/alrm
	  signal/chld
	  signal/cont
	  signal/fpe
	  signal/hup
	  signal/ill
	  signal/int
	  signal/kill
	  signal/pipe
	  signal/quit
	  signal/segv
	  signal/stop
	  signal/term
	  signal/tstp
	  signal/ttin
	  signal/ttou
	  signal/usr1
	  signal/usr2))

(define-interface signals-internals-interface
  (export signals-ignored-by-default))

(define-interface scsh-errors-interface
  (export errno-error
	  error
	  with-errno-handler*
	  (with-errno-handler :syntax)))



(define buffered-io-flags-interface
  (export bufpol/block
	  bufpol/line
	  bufpol/none))

(define-interface scsh-io-interface
  (compound-interface buffered-io-flags-interface
		      (export close
			      close-after
			      error-output-port
			      dup
			      dup->inport
			      dup->outport
			      dup->fdes
			      open-file

			      fdes-flags
			      set-fdes-flags
			      fdes-status
			      set-fdes-status

			      force-output
			      set-port-buffering
			      bufpol/block
			      bufpol/line
			      bufpol/none

			      seek
			      tell
			      seek/set
			      seek/delta
			      seek/end

			      select
			      select!

			      flush-all-ports
			      y-or-n?
			      *y-or-n-eof-count*
			      ;; R4RS I/O procedures that scsh provides.
			      write
			      char-ready?
			      read-char
			      write-char
			      display
			      newline
			      input-port?
			      output-port?
			      call-with-input-file
			      call-with-output-file
			      with-input-from-file
			      with-output-to-file
			      open-input-file
			      open-output-file
			      format

			      lock-region?
			      lock-region:exclusive?
			      lock-region:whence
			      lock-region:start
			      lock-region:len
			      lock-region:pid
			      make-lock-region

			      lock-region
			      lock-region/no-block
			      get-lock-region
			      unlock-region
			      with-region-lock*
			      (with-region-lock :syntax)

			      fork-pty-session
			      open-pty
			      pty-name->tty-name
			      tty-name->pty-name
			      make-pty-generator

			      with-current-input-port*
			      (with-current-input-port :syntax)
			      with-current-output-port*
			      (with-current-output-port :syntax)
			      with-error-output-port*
			      (with-error-output-port :syntax)
			      set-current-input-port!
			      set-current-output-port!
			      set-error-output-port!

			      stdports->stdio
			      stdio->stdports
			      with-stdio-ports*
			      (with-stdio-ports :syntax)

			      call/fdes
			      release-port-handle
			      port-revealed
			      fdes->inport
			      fdes->outport
			      move->fdes
			      open-fdes
			      pipe
			      port->string
			      port->sexp-list
			      port->string-list
			      port->list
			      reduce-port
			      port->fdes
			      read-string
			      read-string!
			      read-string/partial
			      read-string!/partial
			      write-string
			      write-string/partial)))


(define-interface scsh-file-interface
  (export create-directory
	  create-fifo
	  create-hard-link
	  create-symlink

	  delete-directory
	  delete-file
	  delete-filesys-object
	  rename-file
	  set-file-mode
	  set-file-owner
	  set-file-group
	  set-file-times
	  truncate-file

	  read-symlink			; Not POSIX.

	  file-attributes		; Deprecated;
	  file-info			; preferred.

	  file-info:type
	  file-info:device
	  file-info:inode
	  file-info:mode
	  file-info:nlinks
	  file-info:uid
	  file-info:gid
	  file-info:size
	  file-info:atime
	  file-info:mtime
	  file-info:ctime
	  file-type
	  file-group
	  file-inode
	  file-last-access
	  file-last-mod
	  file-last-status-change
	  file-mode
	  file-nlinks
	  file-owner
	  file-size
	  file-symlink?
	  file-directory?
	  file-fifo?
	  file-regular?
	  file-socket?
	  file-special?
	  file-not-readable?
	  file-not-writable?
	  file-not-writeable?	; Deprecated
	  file-not-executable?
	  file-readable?
	  file-writeable?
	  file-writable?	; Deprecated
	  file-executable?
	  file-not-exists?
	  file-exists?

	  sync-file
	  sync-file-system

	  directory-files
	  glob
	  glob-quote
	  file-match

	  create-temp-file
	  temp-file-iterate
	  temp-file-channel
	  *temp-file-template*))


(define-interface scsh-process-interface
  (export exec
	  exec-path
	  exec/env
	  exec-path/env
	  %exec
	  exec-path-search

	  exit
	  %exit

	  suspend

	  fork
	  %fork

	  proc?
	  proc:pid
	  pid->proc

	  autoreap-policy
	  reap-zombies
	  
	  wait
	  wait-any
	  wait-process-group

	  status:exit-val
	  status:stop-sig
	  status:term-sig
	  wait/poll
	  wait/stopped-children

	  call-terminally
	  halts?))


(define-interface scsh-process-state-interface
  (export umask
	  set-umask
	  with-umask*
	  (with-umask :syntax)

	  chdir
	  cwd
	  with-cwd*
	  (with-cwd :syntax)

	  pid
	  parent-pid
	  process-group
	  set-process-group
	  become-session-leader

	  user-login-name
	  user-uid
	  user-effective-uid
	  user-gid
	  user-effective-gid
	  user-supplementary-gids
	  set-uid
	  set-gid

	  system-name
	  process-times
	  cpu-ticks/sec))


(define-interface scsh-user/group-db-interface
  (export user-info
	  user-info:name
	  user-info:uid
	  user-info:gid
	  user-info:home-dir
	  user-info:shell

	  ->uid
	  ->username

	  group-info
	  group-info:name
	  group-info:gid
	  group-info:members

	  ->gid
	  ->groupname))


(define-interface scsh-command-line-interface
  (export command-line-arguments
	  command-line
	  arg
	  arg*
	  argv))


(define-interface scsh-signals-interface
  (export signal-process
	  signal-process-group
	  pause-until-interrupt
	  sleep
	  itimer))


(define-interface scsh-environment-interface
  (export setenv
	  getenv
	  env->alist
	  alist->env
	  alist-delete
	  alist-update
	  alist-compress
	  with-env*
	  with-total-env*
	  (with-env :syntax)
	  (with-total-env :syntax)
	  add-before
	  add-after))


(define-interface scsh-home-interface
  (export home-directory
	  exec-path-list))


(define-interface scsh-regexp-interface
  (export string-match
	  regexp-match?
	  match:start
	  match:end
	  match:substring
	  make-regexp
	  regexp?
	  regexp-exec
	  regexp-subst
	  regexp-quote))


(define-interface scsh-string-interface
  (compound-interface (export substitute-env-vars
			      index
			      rindex)
		      scsh-regexp-interface))


(define-interface scsh-file-names-interface
  (export file-name-as-directory
	  file-name-directory?
	  file-name-non-directory?
	  directory-as-file-name
	  file-name-absolute?
	  file-name-directory
	  file-name-nondirectory
	  split-file-name
	  path-list->file-name
	  file-name-extension
	  file-name-sans-extension
	  replace-extension
	  parse-file-name
	  expand-file-name
	  simplify-file-name
	  resolve-tilde-file-name
	  resolve-file-name
	  home-dir
	  home-file))


(define-interface scsh-time-interface
  (export make-date
	  date?

	  date:seconds
	  date:minute	
	  date:hour   	
	  date:month-day	
	  date:month   	
	  date:year    	
	  date:tz-name	
	  date:tz-secs	
	  date:summer?	
	  date:week-day	
	  date:year-day

	  set-date:seconds
	  set-date:minute	
	  set-date:hour   	
	  set-date:month-day	
	  set-date:month   	
	  set-date:year    	
	  set-date:tz-name	
	  set-date:tz-secs	
	  set-date:summer?	
	  set-date:week-day	
	  set-date:year-day

	  time+ticks
	  ticks/sec
	  time
	  date
	  date->string
	  format-date))
	  

(define-interface scsh-misc-interface
  (export (receive :syntax)

	  arithmetic-shift
	  bitwise-and
	  bitwise-ior
	  bitwise-not
	  bitwise-xor))


(define-interface scsh-high-level-process-interface
  (export (run :syntax)
	  (exec-epf :syntax)
	  (& :syntax)
	  (||		  :syntax)
;	  (:or:           :syntax)	; Alternate R4RS syntax for ||.
	  (&&             :syntax)
	  (run/collecting :syntax)
	  (run/port+proc  :syntax)
	  (run/port       :syntax)
	  (run/strings    :syntax)
	  (run/file       :syntax)
	  (run/string     :syntax)
	  (run/sexp       :syntax)
	  (run/sexps      :syntax)

	  fork/pipe
	  %fork/pipe
	  fork/pipe+
	  %fork/pipe+
	  tail-pipe
	  tail-pipe+
	  run/collecting*
	  run/port+proc*
	  run/port*
	  run/file*
	  run/string*
	  run/sexp*
	  run/sexps*
	  run/strings*

	  char-filter
	  string-filter))


(define-interface scsh-version-interface
  (export scsh-major-version
	  scsh-minor-version
	  scsh-version-string))


;;; This is probably bogus.
(define-interface string-ports-interface
  (export make-string-input-port
          call-with-string-output-port
	  make-string-output-port
	  string-output-port-output))


(define-interface scsh-utilities-interface
  (export del delete index rindex reduce filter first any first? nth
	  any? every? mapv mapv! vector-every? copy-vector initialize-vector
	  check-arg conjoin disjoin negate compose reverse! call/cc
	  deprecated-proc
	  deposit-bit-field
	  real->exact-integer))

;;; semi-standard network magic numbers
;;; should be available on all platforms
;;; if not, tell us, and we'll move it
;;; to the os-dependent directory

;;; for now, all socket option magic numbers
;;; are considered machine dependent until
;;; there is a standard or a clear portable subset

(define-interface sockets-network-interface
  (export shutdown/receives
	  shutdown/sends
	  shutdown/sends+receives
	  herror/host-not-found
	  herror/try-again
	  herror/no-recovery
	  herror/no-data
	  herror/no-address
	  address-family/unspecified
	  address-family/unix
	  address-family/internet
	  socket-type/stream
	  socket-type/datagram
	  socket-type/raw
	  ;;socket-type/rdm
	  ;;socket-type/seqpacket
	  protocol-family/unspecified
	  protocol-family/unix
	  protocol-family/internet
	  internet-address/any
	  internet-address/loopback
	  internet-address/broadcast
	  message/out-of-band
	  message/peek
	  message/dont-route
	  level/socket
	  options/boolean
	  options/value
	  options/linger
	  options/timeout))

;;; actual functions interface
(define-interface scsh-sockets-interface
  (export socket-connect
	  bind-listen-accept-loop
	  socket?
	  socket:family
	  socket:inport
	  socket:outport
	  socket-address?   
	  socket-address:family
	  internet-address->socket-address
	  socket-address->internet-address
	  unix-address->socket-address
	  socket-address->unix-address
	  create-socket
	  close-socket
	  bind-socket
	  connect-socket
	  listen-socket
	  accept-connection
	  socket-remote-address
	  socket-local-address
	  shutdown-socket
	  create-socket-pair
	  receive-message
	  receive-message!
	  receive-message/partial
	  receive-message!/partial
	  send-message
	  send-message/partial
	  socket-option
	  set-socket-option

	  host-info
	  host-info?
	  host-info:name
	  host-info:aliases
	  host-info:addresses
	  network-info
	  network-info?
	  network-info:name
	  network-info:aliases
	  network-info:net
	  service-info
	  service-info?
	  service-info:name
	  service-info:aliases
	  service-info:port
	  service-info:protocol
	  protocol-info
	  protocol-info?
	  protocol-info:name
	  protocol-info:aliases
	  protocol-info:number
	  
	  net-to-host-32
	  net-to-host-16
	  host-to-net-32
	  host-to-net-16
	  ))


(define-interface char-set-interface
  (export char:newline char:tab char:linefeed char:page char:return char:space
	  char-ascii?
	  char-set?

	  char-set
	  chars->char-set
	  string->char-set
	  ascii-range->char-set
	  predicate->char-set
	  ->char-set

	  char-set-members
	  char-set-contains?

	  char-set-invert
	  char-set-union
	  char-set-intersection
	  char-set-difference

	  char-set:upper-case
	  char-set:lower-case
	  char-set:numeric
	  char-set:whitespace
	  char-set:not-whitespace
	  char-set:alphabetic
	  char-set:alphanumeric
	  char-set:graphic

	  char-upper-case?
	  char-lower-case?
	  char-numeric?
	  char-whitespace?
	  char-alphabetic?
	  char-alphanumeric?
	  char-graphic?))


(define-interface scsh-field-reader-interface
  (export join-strings
	  field-splitter infix-splitter suffix-splitter sloppy-suffix-splitter
	  record-reader
	  field-reader
	  nth))		; Kinda handy.

(define-interface scsh-delimited-readers-interface
  (export read-line
	  read-paragraph
	  read-delimited read-delimited!
	  %read-delimited!
	  skip-char-set))

(define-interface awk-interface
  (export (awk :syntax)))

(define-interface scsh-dbm-interface
  (export dbm-open
	  dbm-close
	  dbm-delete
	  dbm-fetch
	  dbm-insert
	  dbm-replace
	  dbm-firstkey
	  dbm-nextkey
	  dbm-record?
	  dbm-record:open?
	  btree/method
	  btree-info:flags
	  btree-info:cachesize
	  btree-info:maxkeypage
	  btree-info:minkeypage
	  btree-info:psize
	  btree-info:lorder
	  btree-info?
	  make-btree-info
	  hash/method
	  hash-info:bsize
	  hash-info:ffactor
	  hash-info:nelem
	  hash-info:cachesize
	  hash-info:lorder
	  hash-info?
	  make-hash-info
	  recno/method
	  recno-info:flags
	  recno-info:cachesize
	  recno-info:psize
	  recno-info:lorder
	  recno-info:reclen
	  recno-info:bval
	  recno-info:bfname
	  recno-info?
	  make-recno-info))

;;; Magic flags for SCSH-TTY-INTERFACE.
(define-interface tty-flags-interface
  (export
          ;; Indices into the control char string
	  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
          ;; Posix
          ttychar/eof
	  ttychar/eol
	  ttychar/delete-char
	  ttychar/delete-line
	  ttychar/interrupt
	  ttychar/quit
	  ttychar/suspend
	  ttychar/start
	  ttychar/stop
	  ttychar/min
	  ttychar/time
	  
	  ;; SVR4 & 4.3+BSD
	  ttychar/delete-word
	  ttychar/reprint
	  ttychar/literal-next
	  ttychar/discard
	  ttychar/delayed-suspend
	  ttychar/eol2

	  ;; 4.3+BSD
	  ttychar/status

	  disable-tty-char

	  ;; Input flag bits
	  ;;;;;;;;;;;;;;;;;;
	  ;; Posix
	  ttyin/ignore-break
	  ttyin/interrupt-on-break
	  ttyin/ignore-bad-parity-chars
	  ttyin/mark-parity-errors
	  ttyin/check-parity
	  ttyin/7bits
	  ttyin/nl->cr
	  ttyin/ignore-cr
	  ttyin/cr->nl
	  ttyin/output-flow-ctl
	  ttyin/input-flow-ctl

	  ;; SVR4 & 4.3+BSD
	  ttyin/xon-any
	  ttyin/beep-on-overflow

	  ;; SVR4
	  ttyin/lowercase

	  ;; Output flag bits
	  ;;;;;;;;;;;;;;;;;;;
	  ttyout/enable			; opost: enable output processing

	  ;; SVR4 & 4.3+BSD
	  ttyout/nl->crnl		; onlcr: map nl to cr-nl

	  ;; 4.3+BSD
	  ttyout/discard-eot		; onoeot
	  ttyout/expand-tabs		; oxtabs (NOT xtabs)

	  ;; SVR4
	  ttyout/cr->nl			; ocrnl
	  ttyout/fill-w/del		; ofdel
	  ttyout/delay-w/fill-char	; ofill
	  ttyout/uppercase		; olcuc
	  ttyout/nl-does-cr		; onlret
	  ttyout/no-col0-cr		; onocr

	  ;; Newline delay
	  ttyout/nl-delay		; mask (nldly)
	  ttyout/nl-delay0		
	  ttyout/nl-delay1		; tty 37 

	  ;; Horizontal-tab delay
	  ttyout/tab-delay		; mask (tabdly)
	  ttyout/tab-delay0		
	  ttyout/tab-delay1		; tty 37 
	  ttyout/tab-delay2		
	  ttyout/tab-delayx		; Expand tabs (xtabs, tab3)

	  ;; Carriage-return delay
	  ttyout/cr-delay		; mask (crdly)
	  ttyout/cr-delay0		
	  ttyout/cr-delay1		; tn 300 
	  ttyout/cr-delay2		; tty 37 
	  ttyout/cr-delay3		; concept 100 

	  ;; Vertical tab delay 
	  ttyout/vtab-delay		; mask (vtdly)
	  ttyout/vtab-delay0		
	  ttyout/vtab-delay1		; tty 37 

	  ;; Backspace delay
	  ttyout/bs-delay		; mask (bsdly)
	  ttyout/bs-delay0		
	  ttyout/bs-delay1		

	  ;; Form-feed delay
	  ttyout/ff-delay		; mask (ffdly)	
	  ttyout/ff-delay0		
	  ttyout/ff-delay1		

	  ttyout/all-delay


	  ;; Control flag bits
	  ;;;;;;;;;;;;;;;;;;;;
	  ;; Posix
	  ttyc/char-size		; csize: character size mask 
	  ttyc/char-size5		; 5 bits (cs5)
	  ttyc/char-size6		; 6 bits (cs6)
	  ttyc/char-size7		; 7 bits (cs7)
	  ttyc/char-size8		; 8 bits (cs8)
	  ttyc/2-stop-bits		; cstopb: Send 2 stop bits.
	  ttyc/enable-read		; cread: Enable receiver.
	  ttyc/enable-parity		; parenb
	  ttyc/odd-parity		; parodd
	  ttyc/hup-on-close		; hupcl: Hang up on last close.
	  ttyc/no-modem-sync		; clocal: Ignore modem lines.

	  ;;  4.3+BSD
	  ttyc/ignore-flags		; cignore: ignore control flags 
	  ttyc/CTS-output-flow-ctl	; ccts_oflow: CTS flow control of output
	  ttyc/RTS-input-flow-ctl	; crts_iflow: RTS flow control of input
	  ttyc/carrier-flow-ctl		; mdmbuf

	  ;; Local flag bits
	  ;;;;;;;;;;;;;;;;;;
	  ;; POSIX
	  ttyl/visual-delete		; echoe: Visually erase chars
	  ttyl/echo-delete-line		; echok: Echo nl after line kill
	  ttyl/echo			; echo:  Enable echoing
	  ttyl/echo-nl			; echonl: Echo nl even if echo is off
	  ttyl/canonical		; icanon: Canonicalize input
	  ttyl/enable-signals		; isig: Enable ^c, ^z signalling
	  ttyl/extended			; iexten:  Enable extensions
	  ttyl/ttou-signal		; tostop: SIGTTOU on background output
	  ttyl/no-flush-on-interrupt	; noflsh

	  ;; SVR4 & 4.3+BSD
	  ttyl/visual-delete-line	; echoke: visually erase a line-kill 
	  ttyl/hardcopy-delete		; echoprt: visual erase for hardcopy 
	  ttyl/echo-ctl			; echoctl: echo control chars as "^X" 
	  ttyl/flush-output		; flusho: output is being flushed
	  ttyl/reprint-unread-chars	; pendin: retype pending input

	  ;; 4.3+BSD
	  ttyl/alt-delete-word		; altwerase
	  ttyl/no-kernel-status		; nokerninfo: no kernel status on ^T

	  ;; SVR4
	  ttyl/case-map			; xcase: canonical upper/lower presentation
	  ))

;;; Non-exported values required by the tty code.
(define-interface scsh-internal-tty-flags-interface
  (export baud-rates
	  num-ttychars

	  ;; tcflush() constants
	  %flush-tty/input		; TCIFLUSH
	  %flush-tty/output		; TCOFLUSH
	  %flush-tty/both		; TCIOFLUSH

	  ;; tcflow() constants
	  %tcflow/start-out		; TCOON
	  %tcflow/stop-out		; TCOOFF
	  %tcflow/start-in		; TCION
	  %tcflow/stop-in		; TCIOFF

	  ;; tcsetattr() constants
	  %set-tty-info/now		; TCSANOW   Make change immediately.
	  %set-tty-info/drain		; TCSADRAIN Drain output, then change.
	  %set-tty-info/flush		; TCSAFLUSH Drain output, flush input.
	  ))


;;; POSIX termios tty control.
(define-interface tty-interface
  (compound-interface
      tty-flags-interface
      (export 
   	  ;; The tty-info record
	  tty-info?			type/tty-info
	  tty-info:control-chars	set-tty-info:control-chars
	  tty-info:input-flags		set-tty-info:input-flags 
	  tty-info:output-flags		set-tty-info:output-flags  
	  tty-info:control-flags	set-tty-info:control-flags
	  tty-info:local-flags		set-tty-info:local-flags
	  tty-info:input-speed		set-tty-info:input-speed
	  tty-info:output-speed		set-tty-info:output-speed
	  tty-info:min			set-tty-info:min
	  tty-info:time			set-tty-info:time

	  make-tty-info			copy-tty-info

	  tty-info
	  set-tty-info/now
	  set-tty-info/drain
	  set-tty-info/flush

	  send-tty-break
	  drain-tty
	  flush-tty/input
	  flush-tty/output
	  flush-tty/both

	  start-tty-output
	  stop-tty-output
	  start-tty-input
	  stop-tty-input

	  encode-baud-rate
	  decode-baud-rate

	  open-control-tty
	  set-tty-process-group
	  tty-process-group

	  tty?
	  tty-file-name
	  control-tty-file-name
	  )))

(define-interface signal-handler-interface
  (export signal->interrupt
	  interrupt-set
	  (with-enabled-interrupts :syntax)
	  with-enabled-interrupts*
	  set-signal-handler!
	  signal-handler
	  %set-unix-signal-handler!
	  %unix-signal-handler
	  ))