stk/Help/font.n.html

166 lines
5.5 KiB
HTML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<HTML><HEAD><TITLE>Tk Built-In Commands - font manual page</TITLE></HEAD>
<BR>
<BODY bgcolor = #c3c3ff>
<H2><IMG ALIGN=BOTTOM SRC="./Img/ManPageBlue.gif"> font</H2>
<I>Create and inspect fonts.</I><P><IMG ALIGN=TOP SRC="./Img/line-red.gif">
<H3><A NAME="M2">SYNOPSIS</A></H3>
(<B>font</B><I> option </I>?<I>arg arg ...</I>?)<BR>
<H3><A NAME="M3">DESCRIPTION</A></H3>
The <B>font</B> procedure provides several facilities for dealing with
fonts, such as defining named fonts and inspecting the actual attributes of
a font. The procedure has several different forms, determined by the
first argument. The following forms are currently supported:
<P>
<DL>
<DT><A NAME="M4">(<B>font 'actual </B><I>font</I> {? B:displayof} { Iwindow R?} {? Ioption R?)}</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M5">(<B>font 'configure </B><I>fontname</I> ?<I>option</I>? ?<I>value option value ...</I>?)</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M6">(<B>font 'create</B> ?<I>fontname</I>? ?<I>option value ...</I>?)</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M7">(<B>font 'delete</B> <I>fontname</I> ?<I>fontname ...</I>?)</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M8">(<B>font 'families</B>)</A><DD>
<DT><A NAME="M9">(<B>font 'families</B> { B:displayof} { Iwindow R?)}</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M10">(<B>font 'measure </B><I>font</I> {? B:displayof} { Iwindow R?} { Itext R)}</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M11">(<B>font 'metrics </B><I>font</I> {? B:displayof} { Iwindow R?} {? Ioption R?)}</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M12">(<B>font 'names</B>)</A><DD>
The return value is a list of all the named fonts that are currently defined.
<P>
</DL>
<H3><A NAME="M13">FONT DESCRIPTION</A></H3>
The following formats are accepted as a font description anywhere
<I>font</I> is specified as an argument above; these same forms are also
permitted when specifying the <B>:font</B> option for widgets.
<P>
<DL>
<DT><A NAME="M14">{[1]} <I>fontname</I></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M15">{[2]} <I>systemfont</I></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M16">{[3]} <I>family </I>?<I>size</I>? ?<I>style</I>? ?<I>style ...</I>?</A><DD>
</DL>
<UL>
<PRE><B>normal bold roman italic
underline overstrike</B></PRE>
</UL>
<P>
<DL>
<DT><A NAME="M17">{[4]} X-font names (XLFD)</A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M18">{[5]} <I>option value </I>?<I>option value ...</I>?</A><DD>
</DL>
<P>
When font description <I>font</I> is used, the system attempts to parse the
description according to each of the above five rules, in the order specified.
Cases [1] and [2] must match the name of an existing named font or of a
system font. Cases [3], [4], and [5] are accepted on all
platforms and the closest available font will be used. In some situations
it may not be possible to find any close font (e.g., the font family was
a garbage value); in that case, some system-dependant default font is
chosen. If the font description does not match any of the above patterns,
an error is generated.
<H3><A NAME="M19">FONT METRICS</A></H3>
<P>
<DL>
<DT><A NAME="M20"><B>:ascent </B></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M21"><B>:descent </B></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M22"><B>:linespace</B></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M23"><B>:fixed </B></A><DD>
</DL>
<H3><A NAME="M24">FONT OPTIONS</A></H3>
The following options are supported on all platforms, and are used when
constructing a named font or when specifying a font using style [5] as
above:
<P>
<DL>
<DT><A NAME="M25"><B>:family </B><I>name</I></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M26"><B>:size </B><I>size</I></A><DD>
</DL>
<UL>
<P>
Sizes should normally be specified in points so the application will remain
the same ruler size on the screen, even when changing screen resolutions or
moving scripts across platforms. However, specifying pixels is useful in
certain circumstances such as when a piece of text must line up with respect
to a fixed-size bitmap. The mapping between points and pixels is set when
the application starts, based on properties of the installed monitor, but it
can be overridden by calling <B>(tk-state 'scaling)</B>.
</UL>
<P>
<DL>
<DT><A NAME="M27"><B>:weight </B><I>weight</I></A><DD>
</DL>
<P>
<DL>
<DT><A NAME="M28"><B>:slant </B><I>slant</I></A><DD>
The amount the characters in the font are slanted away from the
vertical. Valid values for slant are <B>roman</B> and <B>italic</B>.
A roman font is the normal, upright appearance of a font, while
an italic font is one that is tilted some number of degrees from upright.
The closest available slant to the one specified will be chosen.
The default slant is <B>roman</B>.
<P>
<DT><A NAME="M29"><B>:underline </B><I>boolean</I></A><DD>
The value is a boolean flag that specifies whether characters in this
font should be underlined. The default value for underline is <B>#f</B>.
<P>
<DT><A NAME="M30"><B>:overstrike </B><I>boolean</I></A><DD>
The value is a boolean flag that specifies whether a horizontal line should
be drawn through the middle of characters in this font. The default value
for overstrike is <B>#f</B>.
<P>
</DL>
<H3><A NAME="M31">PLATFORM-SPECIFIC ISSUES</A></H3>
The following named system fonts are supported:
<P>
<DL>
<DT><A NAME="M32">X Windows:</A><DD>
All valid X font names, including those listed by xlsfonts(1), are available.
<P>
<DT><A NAME="M33">MS Windows:</A><DD>
<PRE><B>system ansi device
systemfixed ansifixed oemfixed</B></PRE>
<DT><A NAME="M34">Macintosh:</A><DD>
<PRE><B>system application</B></PRE>
</DL>
<P><IMG ALIGN=TOP SRC="./Img/line-red.gif"><P>
<A HREF=./STk-hlp.html><IMG ALIGN=BOTTOM SRC="./Img/RefBookBlue.gif"> Back to the <B>STk</B> main page</A>
</BODY></HTML>