'\" '\" Copyright (c) 1990 The Regents of the University of California. '\" Copyright (c) 1994-1995 Sun Microsystems, Inc. '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" '\" @(#) bind.n 1.35 95/08/26 16:27:12 '\" .so STk-man.macros .TH bind n 3.2 STk "Tk Built-In Commands" .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME bind \- Arrange for X events to invoke STk scripts .SH SYNOPSIS (\fBbind\fI tag\fR) .sp (\fBbind\fI tag sequence\fR) .sp (\fBbind\fI tag sequence script\fR) .BE .SH INTRODUCTION .PP The \fBbind\fR procedure associates STk scripts with X events. If all three arguments are specified, \fBbind\fR will arrange for \fIscript\fR (a STk script) to be evaluated whenever the event(s) given by \fIsequence\fR occur in the window(s) identified by \fItag\fR. If is specified for a given sequence, it replaces the previous binding. If \fIscript\fR is an empty string then the current binding for \fIsequence\fR is destroyed, leaving \fIsequence\fR unbound. In all of the cases where a \fIscript\fR argument is provided, \fBbind\fR returns an empty list. .PP If \fIsequence\fR is specified without a \fIscript\fR, then the script currently bound to \fIsequence\fR is returned, or an empty list is returned if there is no binding for \fIsequence\fR. If neither \fIsequence\fR nor \fIscript\fR is specified, then the return value is a list whose elements are all the sequences for which there exist bindings for \fItag\fR. .PP The \fItag\fR argument determines which window(s) the binding applies to. If \fItag\fR begins with a dot, as in \fB.a.b.c\fR, then it must be the path name for a window; otherwise it may be an arbitrary string. Each window has an associated list of tags, and a binding applies to a particular window if its tag is among those specified for the window. Although the \fBbindtags\fR procedure may be used to assign an arbitrary set of binding tags to a window, the default binding tags provide the following behavior: .IP If a tag is the name of an internal window the binding applies to that window. .IP If the tag is the name of a toplevel window the binding applies to the toplevel window and all its internal windows. .IP If the tag is the name of a class of widgets, such as \fBButton\fR, the binding applies to all widgets in that class; .IP If \fItag\fR has the value \fB"all"\fR, the binding applies to all windows in the application. .SH "EVENT PATTERNS" .PP The \fIsequence\fR argument specifies a sequence of one or more event patterns, with optional white space between the patterns. Each event pattern may take one of three forms. In the simplest case it is a single printing ASCII character, such as \fBa\fR or \fB[\fR. The character may not be a space character or the character \fB<\fR. This form of pattern matches a \fBKeyPress\fR event for the particular character. The second form of pattern is longer but more general. It has the following syntax: .CS \fB<\fImodifier-modifier-type-detail\fB>\fR .CE The entire event pattern is surrounded by angle brackets. Inside the angle brackets are zero or more modifiers, an event type, and an extra piece of information (\fIdetail\fR) identifying a particular button or keysym. Any of the fields may be omitted, as long as at least one of \fItype\fR and \fIdetail\fR is present. The fields must be separated by white space or dashes. .PP The third form of pattern is used to specify a user-defined, named virtual event. It has the following syntax: .CS \fB<<\fIname\fB>>\fR .CE The entire virtual event pattern is surrounded by double angle brackets. Inside the angle brackets is the user-defined name of the virtual event. Modifiers, such as \fBShift\fR or \fBControl\fR, may not be combined with a virtual event to modify it. Bindings on a virtual event may be created before the virtual event is defined, and if the definition of a virtual event changes dynamically, all windows bound to that virtual event will respond immediately to the new definition. .SH "MODIFIERS" .PP Modifiers consist of any of the following values: .DS .ta 6c \fBControl\fR \fBMod2, M2\fR \fBShift\fR \fBMod3, M3\fR \fBLock\fR \fBMod4, M4\fR \fBButton1, B1\fR \fBMod5, M5\fR \fBButton2, B2\fR \fBMeta, M\fR \fBButton3, B3\fR \fBAlt\fR \fBButton4, B4\fR \fBDouble\fR \fBButton5, B5\fR \fBTriple\fR \fBMod1, M1\fR .DE Where more than one value is listed, separated by commas, the values are equivalent. Most of the modifiers have the obvious X meanings. For example, \fBButton1\fR requires that button 1 be depressed when the event occurs. For a binding to match a given event, the modifiers in the event must include all of those specified in the event pattern. An event may also contain additional modifiers not specified in the binding. For example, if button 1 is pressed while the shift and control keys are down, the pattern \fB\fR will match the event, but \fB\fR will not. If no modifiers are specified, then any combination of modifiers may be present in the event. .PP \fBMeta\fR and \fBM\fR refer to whichever of the \fBM1\fR through \fBM5\fR modifiers is associated with the meta key(s) on the keyboard (keysyms \fBMeta_R\fR and \fBMeta_L\fR). If there are no meta keys, or if they are not associated with any modifiers, then \fBMeta\fR and \fBM\fR will not match any events. Similarly, the \fBAlt\fR modifier refers to whichever modifier is associated with the alt key(s) on the keyboard (keysyms \fBAlt_L\fR and \fBAlt_R\fR). .PP The \fBDouble\fR and \fBTriple\fR modifiers are a convenience for specifying double mouse clicks and other repeated events. They cause a particular event pattern to be repeated 2 or 3 times, and also place a time and space requirement on the sequence: for a sequence of events to match a \fBDouble\fR or \fBTriple\fR pattern, all of the events must occur close together in time and without substantial mouse motion in between. For example, \fB\fR is equivalent to \fB\fR with the extra time and space requirement. .SH "EVENT TYPES" .PP The \fItype\fR field may be any of the standard X event types, with a few extra abbreviations. Below is a list of all the val%id types; where two names appear together, they are synonyms. .DS C .ta 5c 10c \fBButtonPress, Button Expose Map ButtonRelease FocusIn Motion Circulate FocusOut Property Colormap Gravity Reparent Configure KeyPress, Key Unmap Destroy KeyRelease Visibility Enter Leave Activate Deactivate\fR .DE .PP The last part of a long event specification is \fIdetail\fR. In the case of a \fBButtonPress\fR or \fBButtonRelease\fR event, it is the number of a button (1-5). If a button number is given, then only an event on that particular button will match; if no button number is given, then an event on any button will match. Note: giving a specific button number is different than specifying a button modifier; in the first case, it refers to a button being pressed or released, while in the second it refers to some other button that is already depressed when the matching event occurs. If a button number is given then \fItype\fR may be omitted: if will default to \fBButtonPress\fR. For example, the specifier \fB<1>\fR is equivalent to \fB\fR. .PP If the event type is \fBKeyPress\fR or \fBKeyRelease\fR, then \fIdetail\fR may be specified in the form of an X keysym. Keysyms are textual specifications for particular keys on the keyboard; they include all the alphanumeric ASCII characters (e.g. ``a'' is the keysym for the ASCII character ``a''), plus descriptions for non-alphanumeric characters (``comma'' is the keysym for the comma character), plus descriptions for all the non-ASCII keys on the keyboard (``Shift_L'' is the keysm for the left shift key, and ``F1'' is the keysym for the F1 function key, if it exists). The complete list of keysyms is not presented here; it is available in other X documentation and may vary from system to system. If necessary, you can use the \fB|K|\fR closure parameter described below to print out the keysym name for a particular key. If a keysym \fIdetail\fR is given, then the \fItype\fR field may be omitted; it will default to \fBKeyPress\fR. For example, \fB\fR is equivalent to \fB\fR. .SH "BINDING SCRIPTS AND SUBSTITUTIONS" .PP The \fIscript\fR argument to \fBbind\fR must be a closure, which will be executed whenever the given event sequence occurs. The closure can have parameters. Those parameters are one character symbols (with convention which are described below). Parameter list will be evaluated just before the script is fired. Note that some parameters are only valid for certain types of events; if they are used for other types of events the value substituted is undefined. .IP \fB%\fR 5 Replaced with a single percent. .IP \fB#\fR 5 The number of the last client request processed by the server (the \fIserial\fR field from the event). Valid for all event types. .IP \fBa\fR 5 The \fIabove\fR field from the event, formatted as a hexadecimal number. Valid only for \fBConfigure\fR events. .IP \fBb\fR 5 The number of the button that was pressed or released. Valid only for \fBButtonPress\fR and \fBButtonRelease\fR events. .IP \fBc\fR 5 The \fIcount\fR field from the event. Valid only for \fBExpose\fR events. .IP \fBd\fR 5 The \fIdetail\fR field from the event. The \fBd\fR is replaced by a string identifying the detail. For \fBEnter\fR, \fBLeave\fR, \fBFocusIn\fR, and \fBFocusOut\fR events, the string will be one of the following: .RS .DS .ta 6c \fBNotifyAncestor NotifyNonlinearVirtual NotifyDetailNone NotifyPointer NotifyInferior NotifyPointerRoot NotifyNonlinear NotifyVirtual\fR .DE For events other than these, the substituted string is undefined. .RE .IP \fBf\fR 5 The \fIfocus\fR field from the event (\fB#f\fR or \fB#t\fR). Valid only for \fBEnter\fR and \fBLeave\fR events. .IP \fBh\fR 5 The \fIheight\fR field from the event. Valid only for \fBConfigure\fR and \fBExpose\fR events. .IP \fBk\fR 5 The \fIkeycode\fR field from the event. Valid only for \fBKeyPress\fR and \fBKeyRelease\fR events. .IP \fBm\fR 5 The \fImode\fR field from the event. The substituted string is one of \fBNotifyNormal\fR, \fBNotifyGrab\fR, \fBNotifyUngrab\fR, or \fBNotifyWhileGrabbed\fR. Valid only for \fBEnter\fR, \fBFocusIn\fR, \fBFocusOut\fR, and \fBLeave\fR events. .IP \fBo\fR 5 The \fIoverride_redirect\fR field from the event. Valid only for \fBMap\fR, \fBReparent\fR, and \fBConfigure\fR events. .IP \fBp\fR 5 The \fIplace\fR field from the event, substituted as one of the strings \fBPlaceOnTop\fR or \fBPlaceOnBottom\fR. Valid only for \fBCirculate\fR events. .IP \fBs\fR 5 The \fIstate\fR field from the event. For \fBButtonPress\fR, \fBButtonRelease\fR, \fBEnter\fR, \fBKeyPress\fR, \fBKeyRelease\fR, \fBLeave\fR, and \fBMotion\fR events, a decimal string is substituted. For \fBVisibility\fR, one of the strings \fBVisibilityUnobscured\fR, \fBVisibilityPartiallyObscured\fR, and \fBVisibilityFullyObscured\fR is substituted. .IP \fBt\fR 5 The \fItime\fR field from the event. Valid only for events that contain a \fItime\fR field. .IP \fBw\fR 5 The \fIwidth\fR field from the event. Valid only for \fBConfigure\fR and \fBExpose\fR events. .IP \fBx\fR 5 The \fIx\fR field from the event. Valid only for events containing an \fIx\fR field. .IP \fBy\fR 5 The \fIy\fR field from the event. Valid only for events containing a \fIy\fR field. .IP \fBA\fR 5 Substitutes the ASCII character corresponding to the event, or the empty string if the event doesn't correspond to an ASCII character (e.g. the shift key was pressed). \fBXLookupString\fR does all the work of translating from the event to an ASCII character. Valid only for \fBKeyPress\fR and \fBKeyRelease\fR events. .IP \fBB\fR 5 The \fIborder_width\fR field from the event. Valid only for \fBConfigure\fR events. .IP \fBE\fR 5 The \fIsend_event\fR field from the event. Valid for all event types. .IP \fBK\fR 5 The keysym corresponding to the event, substituted as a textual string. Valid only for \fBKeyPress\fR and \fBKeyRelease\fR events. .IP \fBN\fR 5 The keysym corresponding to the event, substituted as a decimal number. Valid only for \fBKeyPress\fR and \fBKeyRelease\fR events. .IP \fBR\fR 5 The \fIroot\fR window identifier from the event. Valid only for events containing a \fIroot\fR field. .IP \fBS\fR 5 The \fIsubwindow\fR window identifier from the event, formatted as a hexadecimal number. Valid only for events containing a \fIsubwindow\fR field. .IP \fBT\fR 5 The \fItype\fR field from the event. Valid for all event types. .IP \fBW\fR 5 The path name of the window to which the event was reported (the \fIwindow\fR field from the event). Valid for all event types. .IP \fBX\fR 5 The \fIx_root\fR field from the event. If a virtual-root window manager is being used then the substituted value is the corresponding x-coordinate in the virtual root. Valid only for \fBButtonPress\fR, \fBButtonRelease\fR, \fBKeyPress\fR, \fBKeyRelease\fR, and \fBMotion\fR events. .IP \fBY\fR 5 The \fIy_root\fR field from the event. If a virtual-root window manager is being used then the substituted value is the corresponding y-coordinate in the virtual root. Valid only for \fBButtonPress\fR, \fBButtonRelease\fR, \fBKeyPress\fR, \fBKeyRelease\fR, and \fBMotion\fR events. .LP The following example show how to display a message each time the l1 or l2 label is entered: .DS (pack (label '.l1 :text "One")) (pack (label '.l2 :text "Two")) (let ((mess (lambda (|W| x y) (format #t "Entering ~S x=~a y=~a\n" |W| x y)))) (bind .l1 "" mess) (bind .l2 "" mess)) .DE \fBNote the usage of the "|" convention for the symbol parameters which must be in left in upper-case.\fR .SH MULTIPLE MATCHES .PP It is possible for several bindings to match a given X event. If the bindings are associated with different \fItag\fR's, then each of the bindings will be executed, in order. By default, a binding for the widget will be executed first, followed by a class binding, a binding for its toplevel, and an \fBall\fR binding. The \fBbindtags\fR procedure may be used to change this order for a particular window or to associate additional binding tags with the window. .PP If the binding procedure result is the symbol \fBbreak\fR, then no other scripts will be invoked for the event. .PP If more than one binding matches a particular event and they have the same \fItag\fR, then the most specific binding is chosen and its script is evaluated. The following tests are applied, in order, to determine which of several matching sequences is more specific: (a) a longer sequence (in terms of number of events matched) is more specific than a shorter sequence; (b) an event pattern that specifies a specific button or key is more specific than one that doesn't; (c) if the modifiers specified in one pattern are a subset of the modifiers in another pattern, then the pattern with more modifiers is more specific. (d) a virtual event whose physical pattern matches the sequence is less specific than the same physical pattern that is not associated with a virtual event. (e) given a sequence that matches two or more virtual events, one of the virtual events will be chosen, but the order is undefined. .PP If the matching sequences contain more than one event, then tests (c)-(e) are applied in order from the most recent event to the least recent event in the sequences. If these tests fail to determine a winner, then the most recently registered sequence is the winner. .PP If there are two (or more) virtual events that are both triggered by the same sequence, and both of those virtual events are bound to the same window tag, then only one of the virtual events will be triggered, and it will be picked at random: .CS (event 'add "<>" "") (event 'add "<>" "") (event 'add "<>" "") (bind "Entry" "<>" (lambda () (display "Paste\n"))) (bind "Entry" "<>" (lambda () (display "Scroll\n"))) .CE If the user types Control-y, the \fB<>\fR binding will be invoked, but if the user presses button 2 then one of either the \fB<>\fR or the \fB<>\fR bindings will be invoked, but exactly which one gets invoked is undefined. .PP If an X event does not match any of the existing bindings, then the event is ignored. An unbound event is not considered to be an error. .LP The following example illustrates how to use the \fBbreak\fR symbol to break a binding chain. .DS (pack (entry '.e)) (bind .e "" (lambda (|A|) (unless (string->number |A|) 'break))) .DE Bindings for the entry \fB.e\fR are executed before those for its class (i.e. \fBEntry\fR). This allows us to filter the characters which are effectively passed to the \fB.e\fR widget. The test in this binding closure breaks the chain of bindings if the typed character is not a digit. Otherwise, the following binding, the one for the \fBEntry\fR class, is executed and inserts the character typed (a digit). Consequently, the simple previous binding makes \fB.e\fR a controlled entry which only accepts integer numbers. .SH "MULTI-EVENT SEQUENCES AND IGNORED EVENTS" .PP When a \fIsequence\fR specified in a \fBbind\fR procedure contains more than one event pattern, then its script is executed whenever the recent events (leading up to and including the current event) match the given sequence. This means, for example, that if button 1 is clicked repeatedly the sequence \fB\fR will match each button press but the first. If extraneous events that would prevent a match occur in the middle of an event sequence then the extraneous events are ignored unless they are \fBKeyPress\fR or \fBButtonPress\fR events. For example, \fB\fR will match a sequence of presses of button 1, even though there will be \fBButtonRelease\fR events (and possibly \fBMotion\fR events) between the \fBButtonPress\fR events. Furthermore, a \fBKeyPress\fR event may be preceded by any number of other \fBKeyPress\fR events for modifier keys without the modifier keys preventing a match. For example, the event sequence \fBaB\fR will match a press of the \fBa\fR key, a release of the \fBa\fR key, a press of the \fBShift\fR key, and a press of the \fBb\fR key: the press of \fBShift\fR is ignored because it is a modifier key. Finally, if several \fBMotion\fR events occur in a row, only the last one is used for purposes of matching binding sequences. .SH ERRORS .PP If an error occurs in executing the script for a binding then the \fBbgerror\fR mechanism is used to report the error. .SH "SEE ALSO" bindtags, tkerror